Menu
Search
Filters
Close
Menu

01391 THE USE OF ALUMINIDE DIFFUSION COATINGS TO IMPROVE CARBURIZATION RESISTANCE

Picture for 01391 THE USE OF ALUMINIDE DIFFUSION
Available for download
Product Number: 51300-01391-SG
ISBN: 01391 2001 CP
Author: A.B. Smith, A. Kempster, A. Lambourne and J.R. Smith
$0.00
$20.00
$20.00
Aluminide diffusion coatings have been formed on mild steel, AISI 321 stainless steel, alloy 792 and alloy 800 base materials by pack aluminizing. The aluminizing temperature employed for the four materials was adjusted to facilitate coatings on each with a common thickness between 50 and 60 I~m. A partial characterization of the aluminized materials has been performed. Differential interference contrast optical microscopy was employed to determine coating thickness and to elucidate coating microstructures. Energy-dispersive x-ray analysis was utilised to obtain a composition versus depth profile through the surface of each of the aluminized materials. The results obtained are discussed and compared to previous work. Uncoated and aluminized samples of each material have been pack carburized in air at 900°C. At intervals the samples were removed from the carburizing pack and their weight gain measured. Carburizing was continued for a total cumulative time of 756 hours. It was found that aluminizing had produced a distinct increase in the carburization resistance of the AISI 321 stainless steel, alloy 792 and alloy 800, but, by the end of carburizing, only a marginal increase in that of the mild steel. This is rationalized in terms of oxide layers formed on the surface of the uncoated and aluminized materials.
Aluminide diffusion coatings have been formed on mild steel, AISI 321 stainless steel, alloy 792 and alloy 800 base materials by pack aluminizing. The aluminizing temperature employed for the four materials was adjusted to facilitate coatings on each with a common thickness between 50 and 60 I~m. A partial characterization of the aluminized materials has been performed. Differential interference contrast optical microscopy was employed to determine coating thickness and to elucidate coating microstructures. Energy-dispersive x-ray analysis was utilised to obtain a composition versus depth profile through the surface of each of the aluminized materials. The results obtained are discussed and compared to previous work. Uncoated and aluminized samples of each material have been pack carburized in air at 900°C. At intervals the samples were removed from the carburizing pack and their weight gain measured. Carburizing was continued for a total cumulative time of 756 hours. It was found that aluminizing had produced a distinct increase in the carburization resistance of the AISI 321 stainless steel, alloy 792 and alloy 800, but, by the end of carburizing, only a marginal increase in that of the mild steel. This is rationalized in terms of oxide layers formed on the surface of the uncoated and aluminized materials.
PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$20.00
$20.00
Product tags
Also Purchased
Picture for 01392 A LOW COKING AND CARBURIZATION
Available for download

01392 A LOW COKING AND CARBURIZATION RESISTANT COATING FOR ETHYLENE PYROLYSIS FURNACES

Product Number: 51300-01392-SG
ISBN: 01392 2001 CP
Author: Ted Redmond, Dr. Yan Chen, Arthur Bailey, John Page
$20.00
Picture for 01389 LOCAL HEAVY CARBURIZATION OF
Available for download

01389 LOCAL HEAVY CARBURIZATION OF OLEFIN PYROLYSIS FURNACE TUBE

Product Number: 51300-01389-SG
ISBN: 01389 2001 CP
Author: A. Kh. Bairamov and R. Bradley
$20.00
Picture for 01388 Effect of ID Surface Modification
Available for download

01388 Effect of ID Surface Modification on Carburization of Ethylene Furnace Tubes

Product Number: 51300-01388-SG
ISBN: 01388 2001 CP
Author: Arun R. Kurlekar, George T. Bayer, Gerald E. Gapinski
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support