Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Search
Filters
Close

51318-10805-Understanding Film Persistency using Adsorption and Desorption Studies

This paper describes corrosion inhibitor tests that were carried out at different temperatures and interpreted using Langmuir adsorption and desorption.

Product Number: 51318-10805-SG
Author: Sunder Ramachandran / Zhengwei Liu / Carlos Menendez
Publication Date: 2018
$0.00
$20.00
$20.00

Adsorption and desorption of a product is an important factor in the assessment of availability requirements for a corrosion inhibitor in a given system. Corrosion inhibitors that have film persistence can allow the safe operation of a corrosive oil and gas system for some time period when corrosion inhibitor injection is interrupted. Successful batch corrosion inhibition occurs when significant corrosion inhibition occurs when a corrosion inhibitor is not present in the bulk phase. This paper describes corrosion inhibitor tests that were carried out at different temperatures and interpreted using Langmuir adsorption and desorption. Studying corrosion inhibitor performance and fitting the behavior with Langmuir adsorption and desorption enables a better determination of safe operating envelopes of a system when corrosion inhibitor injection is interrupted. The tests aid the development of an improved assessment of availability of corrosion inhibitor

Key words: Corrosion Inhibition, Batch Treatment, CO2 Corrosion, Corrosion Inhibitor Availability, Adsorption, Desorption, Health Monitoring, CBM

Adsorption and desorption of a product is an important factor in the assessment of availability requirements for a corrosion inhibitor in a given system. Corrosion inhibitors that have film persistence can allow the safe operation of a corrosive oil and gas system for some time period when corrosion inhibitor injection is interrupted. Successful batch corrosion inhibition occurs when significant corrosion inhibition occurs when a corrosion inhibitor is not present in the bulk phase. This paper describes corrosion inhibitor tests that were carried out at different temperatures and interpreted using Langmuir adsorption and desorption. Studying corrosion inhibitor performance and fitting the behavior with Langmuir adsorption and desorption enables a better determination of safe operating envelopes of a system when corrosion inhibitor injection is interrupted. The tests aid the development of an improved assessment of availability of corrosion inhibitor

Key words: Corrosion Inhibition, Batch Treatment, CO2 Corrosion, Corrosion Inhibitor Availability, Adsorption, Desorption, Health Monitoring, CBM

Also Purchased
Picture for 07693 High Performance Batch Treating Corrosion Inhibitor
Available for download

07693 High Performance Batch Treating Corrosion Inhibitor

Product Number: 51300-07693-SG
ISBN: 07693 2007 CP
Author: Jiang Yang, Vladimir Jovancicevic, and Sebastian Mancuso
Publication Date: 2007
$20.00
Picture for Corrosion Inhibition of Stainless Steel in 0.5 M HCl by C6H5NH2
Available for download

51318-10807-Corrosion Inhibition of Stainless Steel in 0.5 M HCl by C6H5NH2

Product Number: 51318-10807-SG
Author: Olugbenga Adeshola OMOTOSHO / Joshua Olusegun OKENIYI / Abimbola Patricia POPOOLA
Publication Date: 2018
$20.00