Menu
Search
Filters
Close
Menu

TM0384-1989, Holiday Detection of Internal Tubular Coatings of Less Thank 10 Mils (0.25 mm) Dry Film Thickness

Picture for TM0384-Holiday Detection of Internal Tubular Coatings of Less Thank 10 Mils (0.25 mm) Dry Film Thickness-HD1989
Available for download

HISTORICAL DOCUMENT. Test method for the detection of holidays in a nonconductive coating film (of 10 mil [0.25 mm] thickness or less) that has been applied to the inner wall of oil field tubular goods. Apparatus. Procedures. Reporting methods.  Historical Document 1989

Product Number: 53052-HD1989
Author: NACE
Publication Date: 1989
Industries: Pipelines, Tanks, and Underground Systems , Test Method , Coatings and Linings
$179.00
$179.00
$179.00

HISTORICAL DOCUMENT. This NACE standard practice provides a test method for the detection of holidays in a nonconductive coating film that has been applied to the inner wall of oil field tubular goods. The apparatus to and the recommended procedures for conducting the test are described here. Methods of reporting the test date are also described.

 The test method applies to coatings that have a dry thickness of less than 10 mils (0.25).

 This test method gives the best results when used on coatings that has not been in service or previously holiday tested, since, in either case, there is a possibility of misleading results arising from surface contamination or salt bridging from the se of a salt test solution or handling salt water.

A holiday is defined as an area of applied coating that exhibits electrical resistance less than some specified value when that area is contacted with a wet sponge and detected with an appropriate instrument.

 The specified resistance for holiday detection is 80,000 Ohms +/- 10% when measured between a wet sponge and the pipe substrate.

Historical Document 1989

HISTORICAL DOCUMENT. This NACE standard practice provides a test method for the detection of holidays in a nonconductive coating film that has been applied to the inner wall of oil field tubular goods. The apparatus to and the recommended procedures for conducting the test are described here. Methods of reporting the test date are also described.

 The test method applies to coatings that have a dry thickness of less than 10 mils (0.25).

 This test method gives the best results when used on coatings that has not been in service or previously holiday tested, since, in either case, there is a possibility of misleading results arising from surface contamination or salt bridging from the se of a salt test solution or handling salt water.

A holiday is defined as an area of applied coating that exhibits electrical resistance less than some specified value when that area is contacted with a wet sponge and detected with an appropriate instrument.

 The specified resistance for holiday detection is 80,000 Ohms +/- 10% when measured between a wet sponge and the pipe substrate.

Historical Document 1989

Product tags
Also Purchased
Picture for NACE RP0495-2003
Available for download

NACE RP0495-2003, Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

Product Number: 21072-SG
Publication Date: 2003
$179.00

HISTORICAL DOCUMENT. Training and qualification of craftsmen engaged in abrasive blasting and the application of modern coatings and linings systems.
Picture for SP0394-2013 (formerly RP0394)
Available for download

SP0394-2013 (formerly RP0394), "Application, Performance, and Quality Control of Plant-Applied Single Layer Fusion-Bonded Epoxy External Pipe Coating”

Product Number: 21064-SG
Publication Date: 2013
$179.00

HISTORICAL DOCUMENT. Qualifying and controlling the quality of plant-applied, single-layer fusion-bonded epoxy (FBE) coatings to the external surfaces of carbon steel pipe.  Proper application,  inspection and repair.

NOTE: NACE SP0394-2013—Editorial corrections were made to Table 3 and Table 4 in 2018-04-04. 
Picture for SP0196-2015
Available for download

SP0196-2015 (formerly RP0196), “Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks”

Product Number: 21077-SG
ISBN: 1-57590-189-7
Publication Date: 2015
$179.00

HISTORICAL DOCUMENT. Galvanic anode cathodic protection (CP) for submerged steel surfaces in water supply and fire protection storage tanks.  Design and installation of CP systems.  Effectiveness evaluation, operation, maintenance. 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support