Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

TM0297-HD1997-SG Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials-HD1997

Picture for TM0297-Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials-HD1997
Available for download

Procedures to measure the effect on elastomeric materials subjected to rapid depressurization from elevated pressures and temperatures of 50°C (122°F) or greater in dry CO2 environments…Historical Document 1997

Product Number: 21229-HD1997
ISBN: 1-57590-043-2
Author: NACE International
Publication Date: 1997
Industries: Process Industries , Test Method
$179.00
$179.00
$179.00

This standard test method presents information on carbon dioxide (CO2) environment testing at pressures greater than atmospheric pressure and temperatures of 50°C (122°F) or greater. It is intended to serve as a tool in the evaluation of elastomeric materials for use in the oil field and other energy-related areas where CO2 gaseous environments are encountered. The use of one standard test method will allow engineers who evaluate these materials to compare data from separate laboratories that utilize this method. The precision of this test method and reproducibility within and among laboratories has not been established. The user of this standard is encouraged to establish statistical significance of the data resulting from this method. The task group does not know of a technical organization that has issued a comparable standard test method.

No attempt or implication is made to establish any pass/fail criteria for material tested by this method. The change in properties of an elastomeric material is indicative of its resistance to a specific environment. This test method can be regarded only as a relative measure of the resistance of a material under the conditions of this particular test, and does not necessarily have any direct relation to service performance. The significance of the results can be determined only by each laboratory for its particular application.

This standard was prepared by NACE International Task Group T-1G-26, a component of Unit Committee T-1G on Protective Coatings, Elastomers, and Other Nonmetallic Materials for Oilfield Use. This standard is published under the auspices of Group Committee T-1 on Corrosion Control in Petroleum Production. NACE International technical committees are composed of industry representatives including consumers, producers, and other interested individuals.

1.1 This standard gives procedures to measure the effect on elastomeric materials subjected to rapid depressurization from elevated pressures and temperatures of

50°C (122°F) or greater in dry CO2 environments and is designed for testing O-rings or other test specimens of elastomeric vulcanizates. This method is not applicable to the testing of cellular rubber or porous materials.

Historical Document 1997

This standard test method presents information on carbon dioxide (CO2) environment testing at pressures greater than atmospheric pressure and temperatures of 50°C (122°F) or greater. It is intended to serve as a tool in the evaluation of elastomeric materials for use in the oil field and other energy-related areas where CO2 gaseous environments are encountered. The use of one standard test method will allow engineers who evaluate these materials to compare data from separate laboratories that utilize this method. The precision of this test method and reproducibility within and among laboratories has not been established. The user of this standard is encouraged to establish statistical significance of the data resulting from this method. The task group does not know of a technical organization that has issued a comparable standard test method.

No attempt or implication is made to establish any pass/fail criteria for material tested by this method. The change in properties of an elastomeric material is indicative of its resistance to a specific environment. This test method can be regarded only as a relative measure of the resistance of a material under the conditions of this particular test, and does not necessarily have any direct relation to service performance. The significance of the results can be determined only by each laboratory for its particular application.

This standard was prepared by NACE International Task Group T-1G-26, a component of Unit Committee T-1G on Protective Coatings, Elastomers, and Other Nonmetallic Materials for Oilfield Use. This standard is published under the auspices of Group Committee T-1 on Corrosion Control in Petroleum Production. NACE International technical committees are composed of industry representatives including consumers, producers, and other interested individuals.

1.1 This standard gives procedures to measure the effect on elastomeric materials subjected to rapid depressurization from elevated pressures and temperatures of

50°C (122°F) or greater in dry CO2 environments and is designed for testing O-rings or other test specimens of elastomeric vulcanizates. This method is not applicable to the testing of cellular rubber or porous materials.

Historical Document 1997

Product tags
Also Purchased
Picture for NACE RP0495-2003
Available for download

NACE RP0495-2003, Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

Product Number: 21072-SG
Publication Date: 2003
$179.00

HISTORICAL DOCUMENT. Training and qualification of craftsmen engaged in abrasive blasting and the application of modern coatings and linings systems.
Picture for SP0394-2013 (formerly RP0394)
Available for download

SP0394-2013 (formerly RP0394), "Application, Performance, and Quality Control of Plant-Applied Single Layer Fusion-Bonded Epoxy External Pipe Coating”

Product Number: 21064-SG
Publication Date: 2013
$179.00

HISTORICAL DOCUMENT. Qualifying and controlling the quality of plant-applied, single-layer fusion-bonded epoxy (FBE) coatings to the external surfaces of carbon steel pipe.  Proper application,  inspection and repair.

NOTE: NACE SP0394-2013—Editorial corrections were made to Table 3 and Table 4 in 2018-04-04. 
Picture for SP0196-2015
Available for download

SP0196-2015 (formerly RP0196), “Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks”

Product Number: 21077-SG
ISBN: 1-57590-189-7
Publication Date: 2015
$179.00

HISTORICAL DOCUMENT. Galvanic anode cathodic protection (CP) for submerged steel surfaces in water supply and fire protection storage tanks.  Design and installation of CP systems.  Effectiveness evaluation, operation, maintenance. 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support