Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

TM0174-1991, Laboratory Methods for the Evaluation of Protective Coatings Used as Lining Materials In Immersion Service

Picture for TM0174-Laboratory Methods for the Evaluation of Protective Coatings Used as Lining Materials In Immersion Service-HD1991
Available for download

Two test methods for evaluating the performance of protective coatings and linings used as lining materials in immersion service: one-side testing of the panel and immersion testing of the panel. Historical Document 1991

Product Number: 53021-HD1991
Author: NACE International
Publication Date: 1991
Industries: Test Method , Coatings and Linings
$179.00
$179.00
$179.00

Much of the data on chemical resistance of commercially available coating materials is inadequate, incomplete, and difficult to interpret. This standard is issued by Group Committee T-6 on Protective Coatings and Linings. It was prepared by Task Group

T-6A-23 in Unit Committee T-6A on Coating and Lining Materials for Immersion Service to help manufacturers and users of protective coatings and linings in their selection of materials by providing standard test methods for the evaluation of protective coatings and linings for immersion service. This standard was editorially updated in 1991 by Unit Committee T-6A.

In issuing this standard, it has been recognized that many of the steps involved in the application of materials can be classified as an "art." Therefore, samples for testing should be prepared in a manner to approximate field conditions as closely as possible.

Small panels, whether laboratory or plant tested, may give results which are not necessarily indicative of performance when the same coatings are applied to process equipment. This standard provides two test methods for evaluating protective coatings on any substrate, such as steel, copper, aluminum, etc., so that both the factors of chemical resistance and permeability can be considered. The results obtained should give a good indication of what would happen on exposure to similar service conditions.

Protective coatings, as referred to in this standard, can be applied in liquid form (solution, dispersion: etc.) or dry form (powders), using spray, dip, roller, brush, trowel, or other appropriate application techniques. These coatings may contain fillers or reinforcement, such as glass cloth or flakes, silica, mica, etc.

 1.1 This standard provides two test methods for evaluating the performance of protective coatings and linings used as lining materials in immersion service: one-side testing of the panel and immersion testing of the panel. Protective coatings and linings will be referred to as "coatings" in this standard.

1.2 The test methods are intended to standardize laboratory test procedures and to help in screening various coating materials for prevention of corrosion and product contamination.

1.3 Recommendations included in the test methods are duration of test, temperature, types of test specimens, and testing equipment to be used.

1.4 Recommendations in .this standard are based on the best current technology and experience of the coatings industry.

Historical Document 1991

Much of the data on chemical resistance of commercially available coating materials is inadequate, incomplete, and difficult to interpret. This standard is issued by Group Committee T-6 on Protective Coatings and Linings. It was prepared by Task Group

T-6A-23 in Unit Committee T-6A on Coating and Lining Materials for Immersion Service to help manufacturers and users of protective coatings and linings in their selection of materials by providing standard test methods for the evaluation of protective coatings and linings for immersion service. This standard was editorially updated in 1991 by Unit Committee T-6A.

In issuing this standard, it has been recognized that many of the steps involved in the application of materials can be classified as an "art." Therefore, samples for testing should be prepared in a manner to approximate field conditions as closely as possible.

Small panels, whether laboratory or plant tested, may give results which are not necessarily indicative of performance when the same coatings are applied to process equipment. This standard provides two test methods for evaluating protective coatings on any substrate, such as steel, copper, aluminum, etc., so that both the factors of chemical resistance and permeability can be considered. The results obtained should give a good indication of what would happen on exposure to similar service conditions.

Protective coatings, as referred to in this standard, can be applied in liquid form (solution, dispersion: etc.) or dry form (powders), using spray, dip, roller, brush, trowel, or other appropriate application techniques. These coatings may contain fillers or reinforcement, such as glass cloth or flakes, silica, mica, etc.

 1.1 This standard provides two test methods for evaluating the performance of protective coatings and linings used as lining materials in immersion service: one-side testing of the panel and immersion testing of the panel. Protective coatings and linings will be referred to as "coatings" in this standard.

1.2 The test methods are intended to standardize laboratory test procedures and to help in screening various coating materials for prevention of corrosion and product contamination.

1.3 Recommendations included in the test methods are duration of test, temperature, types of test specimens, and testing equipment to be used.

1.4 Recommendations in .this standard are based on the best current technology and experience of the coatings industry.

Historical Document 1991

Product tags
Also Purchased
Picture for NACE RP0495-2003
Available for download

NACE RP0495-2003, Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

Product Number: 21072-SG
Publication Date: 2003
$179.00

HISTORICAL DOCUMENT. Training and qualification of craftsmen engaged in abrasive blasting and the application of modern coatings and linings systems.
Picture for SP0394-2013 (formerly RP0394)
Available for download

SP0394-2013 (formerly RP0394), "Application, Performance, and Quality Control of Plant-Applied Single Layer Fusion-Bonded Epoxy External Pipe Coating”

Product Number: 21064-SG
Publication Date: 2013
$179.00

HISTORICAL DOCUMENT. Qualifying and controlling the quality of plant-applied, single-layer fusion-bonded epoxy (FBE) coatings to the external surfaces of carbon steel pipe.  Proper application,  inspection and repair.

NOTE: NACE SP0394-2013—Editorial corrections were made to Table 3 and Table 4 in 2018-04-04. 
Picture for SP0196-2015
Available for download

SP0196-2015 (formerly RP0196), “Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks”

Product Number: 21077-SG
ISBN: 1-57590-189-7
Publication Date: 2015
$179.00

HISTORICAL DOCUMENT. Galvanic anode cathodic protection (CP) for submerged steel surfaces in water supply and fire protection storage tanks.  Design and installation of CP systems.  Effectiveness evaluation, operation, maintenance. 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support