Menu
Search
Filters
Close
Menu

The Effects Of Particle Size On Solid Particle Erosion Of Elbows In Low Liquid And Annular Multiphase Flows

Picture for The Effects Of Particle Size On Solid Particle Erosion Of Elbows In Low Liquid And Annular Multiphase Flows
Available for download
Product Number: 51321-16631-SG
Author: Ghulam Haider/ Jun Zhang/ Siamack A. Shirazi
Publication Date: 2021
$0.00
$20.00
$20.00

During production of oil and gas, sand is produced as an unwanted by-product. Sand particles of many sizes carried by the multiphase flow can severely affect the integrity of fluid transportation structure such as pipelines, elbows, reducers and other pipe fittings. Sand production is managed via sand screens and gravel packs. These methods are successful in handling relatively larger sand particles. However, fine particles (< 100-micron size) can pass through most of these controls whcih can block the openings of sand screens which in turn causes higher velocities in other portions of the sand screen. Because of these higher velocities beyond the intended design velocities, the other portions of the sand screen become eroded, lose their effectiveness, and let larger particles pass through them. Furthermore, these small size particles cannot be detected with traditional acoustic monitoring techniques. Moreover, these small particles are highly susceptible to be entertained in high turbulent regions of flow and can cause severe erosion in those regions. Hence, it is critically important to understand erosion caused by small particles along with larger particles. This paper describes the effect of particle size on erosion. Small particle erosion is more severe in gas than liquids because in liquid there is a large momentum exchange with particles. The experimental setup consists of two elbows in series in a flow loop for horizontal and vertical flows.Paint-removal and erosion experiments are conducted in annular flow for different particle sizes as well as different superficial gas and liquid velocities for a 4-inch pipe. The effects of particle size on erosion are discussed with the validated CFD model and flow visualization experiments.

Keywords: Solid Particle Erosion, Fine Particles, Low Liquid Loading, Elbows

During production of oil and gas, sand is produced as an unwanted by-product. Sand particles of many sizes carried by the multiphase flow can severely affect the integrity of fluid transportation structure such as pipelines, elbows, reducers and other pipe fittings. Sand production is managed via sand screens and gravel packs. These methods are successful in handling relatively larger sand particles. However, fine particles (< 100-micron size) can pass through most of these controls whcih can block the openings of sand screens which in turn causes higher velocities in other portions of the sand screen. Because of these higher velocities beyond the intended design velocities, the other portions of the sand screen become eroded, lose their effectiveness, and let larger particles pass through them. Furthermore, these small size particles cannot be detected with traditional acoustic monitoring techniques. Moreover, these small particles are highly susceptible to be entertained in high turbulent regions of flow and can cause severe erosion in those regions. Hence, it is critically important to understand erosion caused by small particles along with larger particles. This paper describes the effect of particle size on erosion. Small particle erosion is more severe in gas than liquids because in liquid there is a large momentum exchange with particles. The experimental setup consists of two elbows in series in a flow loop for horizontal and vertical flows.Paint-removal and erosion experiments are conducted in annular flow for different particle sizes as well as different superficial gas and liquid velocities for a 4-inch pipe. The effects of particle size on erosion are discussed with the validated CFD model and flow visualization experiments.

Keywords: Solid Particle Erosion, Fine Particles, Low Liquid Loading, Elbows

Product tags
Also Purchased
Picture for Analysis Of The Pitting Factor For Predicting Localized Corrosion Of Liquid Radioactive Waste At Elevated Temperatures
Available for download

Analysis Of The Pitting Factor For Predicting Localized Corrosion Of Liquid Radioactive Waste At Elevated Temperatures

Product Number: 51321-16547-SG
Author: Roderick E. Fuentes/ Bruce J. Wiersma/ Crystal. L. Girardot/ Theodore J. Venetz
Publication Date: 2021
$20.00
Picture for 00760 LIQUID COATINGS FOR PIPELINE REPAIR
Available for download

00760 LIQUID COATINGS FOR PIPELINE REPAIR AND REHABILITATION

Product Number: 51300-00760-SG
ISBN: 00760 2000 CP
Author: Ernest W. Klechka
$20.00
Picture for 00082 EROSION DURING UNDERBALANCED DULLING
Available for download

00082 EROSION DURING UNDERBALANCED DULLING

Product Number: 51300-00082-SG
ISBN: 00082 2000 CP
Author: T.J. Locker, J. Saponja, D. Queen
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support