Menu
Search
Filters
Close
Menu

The Effect Of Sulfur Components Of Corrosion Inhibitors On Chemical Qualification

Picture for The Effect Of Sulfur Components Of Corrosion Inhibitors On Chemical Qualification
Available for download

Maintaining the integrity of oilfield equipment is essential to its safe operation and to maximize the efficiency of production. The integrity of oilfield equipment can rely on material selection and control of conditions, however, it is commonly maintained by the applications of chemical corrosion inhibitors (CI). Prior to use, these chemicals must be shown to perform as desired under the field conditions in question. To achieve this, chemicals are often evaluated using robust laboratory-based screening studies to identify potential candidates.

Product Number: 51322-17801-SG
Author: Hunter Thomson, Rodney Madjitey, Ian Carpenter, Caroline Simpson, Gordon Graham, Robert Stalker
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings and Linings , Coatings
$0.00
$20.00
$20.00

In order to successfully select an effective corrosion inhibitor, it is important to make a thorough assessment during a chemical qualification process. To efficiently make a selection, screening tests are generally performed prior to more complex field representative tests.

These screening tests can however misrepresent the performance of an inhibitor which would otherwise be deselected. One potential cause of this is the presence of minor, low concentration components in corrosion inhibitor formulations, commonly referred to as “additives”.

To illustrate this effect, a series of case scenarios and generic corrosion inhibitor tests will be presented, including standard low shear ambient tests, and also higher shear tests. These tests will demonstrate the impact additives can have on screening test results.
The examples show that relatively minor changes in formulated inhibitor chemistry can have a significant impact on the chemical performance and alter product rankings, and therefore affect the selection process.

The work will provide conclusions and recommendations on the best design of a screening program that reduces such test artefacts, and allows for easier interpretation of data. Along with comments that will be provided on the potential impacts this would have in the field.

In order to successfully select an effective corrosion inhibitor, it is important to make a thorough assessment during a chemical qualification process. To efficiently make a selection, screening tests are generally performed prior to more complex field representative tests.

These screening tests can however misrepresent the performance of an inhibitor which would otherwise be deselected. One potential cause of this is the presence of minor, low concentration components in corrosion inhibitor formulations, commonly referred to as “additives”.

To illustrate this effect, a series of case scenarios and generic corrosion inhibitor tests will be presented, including standard low shear ambient tests, and also higher shear tests. These tests will demonstrate the impact additives can have on screening test results.
The examples show that relatively minor changes in formulated inhibitor chemistry can have a significant impact on the chemical performance and alter product rankings, and therefore affect the selection process.

The work will provide conclusions and recommendations on the best design of a screening program that reduces such test artefacts, and allows for easier interpretation of data. Along with comments that will be provided on the potential impacts this would have in the field.

Product tags
Also Purchased
The Need For Independent 3Rd Party Coatings Inspectors On All Industrial Coatings Projects
Available for download

The Need For Independent 3Rd Party Coatings Inspectors On All Industrial Coatings Projects

Product Number: 51322-18101-SG
Author: Tim Bauman
Publication Date: 2022
$20.00

The NACE International Institute Contractor Accreditation Program (NIICAP) is an industry managed accreditation program that validates a contractor's quality assurance program, support practices, and production processes.

SSPC established the Coating Application Specialist (CAS) Certification Program for industrial painters in 2008, at present there are 8 standards for applicators.  It includes QP1 FIELD APPLICATION TO COMPLEX INDUSTRIAL AND MARINE STRUCTURES, QP2 FIELD REMOVAL OF HAZARDOUS COATINGS and QP3 SHOP PAINTING ACCREDITATION PROGRAM. 
Picture for The Evaluation Of Corrosion Behavior Of Austenitic Stainless Steels And Ni-Based Alloys In Molten Salts Under Isothermal And Thermal Cycling For Condition Concentrated Solar Power Plants
Available for download

The Evaluation Of Corrosion Behavior Of Austenitic Stainless Steels And Ni-Based Alloys In Molten Salts Under Isothermal And Thermal Cycling For Condition Concentrated Solar Power Plants

Product Number: 51322-17529-SG
Author: Qingyang Liu, Richard Barker, Chun Wang, Jiong Qian, Anne Neville, Frederick Pessu
Publication Date: 2022
$20.00

The drive towards renewable energy, requirement for reduction in fossil fuel consumption and emission of carbon dioxide has received substantial attention from governments and researchers worldwide during the last few decades [1]. The exploration of renewable sources of energy has been grouped into wind, geothermal, tidal and solar energy. Solar energy has shown great promise due to the abundant amount of energy reaching the Earth [2, 3]. Electricity generation from solar irradiation can be achieved by photovoltaic (PV) and photothermal conversion [4].
Picture for The Influence Of Applied Extension Rate And Specimen Geometry On Assessment Of SSC Resistance By Novel NTSSRT Method
Available for download

The Influence Of Applied Extension Rate And Specimen Geometry On Assessment Of SSC Resistance By Novel NTSSRT Method

Product Number: 51322-17624-SG
Author: Lianlian Liu, Raymundo Case
Publication Date: 2022
$20.00

High strength low alloy (HSLA) steels are preferred for oil and gas pipelines due to their outstanding mechanical properties. Sulfide stress cracking (SSC) has been a major problem for the application of HSLA carbon steel because of the wet H2S environment which commonly presents in oil and gas industry. Several techniques are applied to the study of SSC of steels, including constant load test with smooth specimens and DCB testing.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support