Menu
Search
Filters
Close
Menu

The Corrosion of Copper and its Alloys

The Corrosion of Copper and its Alloys

This book deals with the different forms of corrosion for copper and its alloys. It provides previously unpublished or hard-to-find data, providing a unique reference point for data on the corrosion of copper alloys. The book's chapters cover the following topics: composition/ and properties, film formation, general, localized, and galvanic corrosion, and specific environments - underground, atmospheric,  submerged. Soldered, brazed & welded joints.

2009 NACE, softbound, 369 pages

Product Number: 37591-POD
ISBN: 9781575902258
Author: Roger Francis
$90.00
$120.00
$120.00

This book deals with the different forms of corrosion for copper and its alloys. It provides previously unpublished or hard-to-find data, providing a unique reference point for data on the corrosion of copper alloys. The book's chapters cover the following topics:

  • Copper alloys (composition and properties)
  • Film formation and properties
  • General corrosion
  • Various types of localized corrosion, such as pitting, erosion corrosion, dealloying, and corrosion fatigue
  • Galvanic corrosion
  • Specific environments, including underground corrosion, atmospheric corrosion, and corrosion in waters
  • Joining: corrosion of soldered, brazed, and welded joints



This book is packed with more than 100 photos, along with numerous tables and graphs. It will appeal to engineers who need or want to use copper alloys and need data on the potential corrosion problems and, specifically, how to avoid them.

2009 NACE International, 6" x 9", softbound, 369 pages.

This book deals with the different forms of corrosion for copper and its alloys. It provides previously unpublished or hard-to-find data, providing a unique reference point for data on the corrosion of copper alloys. The book's chapters cover the following topics:

  • Copper alloys (composition and properties)
  • Film formation and properties
  • General corrosion
  • Various types of localized corrosion, such as pitting, erosion corrosion, dealloying, and corrosion fatigue
  • Galvanic corrosion
  • Specific environments, including underground corrosion, atmospheric corrosion, and corrosion in waters
  • Joining: corrosion of soldered, brazed, and welded joints



This book is packed with more than 100 photos, along with numerous tables and graphs. It will appeal to engineers who need or want to use copper alloys and need data on the potential corrosion problems and, specifically, how to avoid them.

2009 NACE International, 6" x 9", softbound, 369 pages.

PRICE BREAKS - The more you buy, the more you save
Quantity
1+
5+
Price
$120.00
$90.00
Product tags
Also Purchased
Galvanic Corrosion: A Practical Guide for Engineers, 2nd Edition

Galvanic Corrosion: A Practical Guide for Engineers, 2nd Edition

Product Number: 37625-POD
ISBN: 978-1-57590-353-8
Author: Roger Francis
$105.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Galvanic corrosion occurs when two dissimilar metals are electrically coupled in an eletrically conducting, corrosion fluid. Under these conditions, the rate of corrosion of one member of the couple is increased above that which would occur if the metal were exposed in isolation.

The author, Roger Francis, provides answers for common questions concerning galvanic corrosion and how to not only stop it, but prevent it.

2017 NACE, 8 x 10" trim size, softbound, 150 pages.
Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines

Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines

Product Number: 37610-POD
ISBN: 978-1-57590-328-6
Author: Richard Eckert
$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This book by renowned expert Richard Eckert is intended to help oil and gas pipeline operators, corrosion professionals, integrity experts and risk management practitioners assess, control, and manage the effects of internal corrosion on pipeline systems, thus improving the safety, reliability and integrity of their operations.

While the focus of this book is on pipelines, the content is broadly applicable to upstream equipment, processing facilities, mid-stream pipelines, liquid and gas storage assets, and delivery/distribution assets.

2016 NACE, 7 x 9" trim size, softbound, 368 pages.
NACE Corrosion Engineer's Reference Guide, Fourth Edition

NACE Corrosion Engineer's Reference Guide, Fourth Edition

Product Number: 37608-POD
ISBN: 978-1-57590-321-7
$170.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

MUST HAVE CLASSIC: The objective of the NACE Corrosion Engineer's Reference Book, published in 2016, is to provide scientists, engineers, technologists, and students with useful and important information and data on corrosion investigation and control.  

This handbook starts out with a comprehensive glossary that includes standard terminology and acronyms related to corrosion. It also contains more than 325 tables, graphs, and charts. 

2016 NACE, 570 pages, 5 x 8" trim size, perfect bound
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support