Menu
Search
Filters
Close
Menu

RP0191-HD1996-SG The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories-HD1996

Picture for The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories
Available for download

This standard recommended practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Historical Document 1996

 

Product Number: 21048-HD1996
Author: NACE International
Publication Date: 1996
Industry: Coatings and Linings
$179.00
$179.00
$179.00

1.1 This standard presents guidelines for the proper care, handling, and installation of IPC oilfield tubular goods and accessories.

1.2 The function of the internal coating system is to form a protective barrier between the metal surface and the environment to prolong the useful life of the tubular goods and accessories.

1.3 If the coating is damaged during storage, handling, transportation, or installation, the protective barrier may be broken. This reduces coating performance and may result in premature failure.

1.4 This standard addresses specific areas of concern to help prevent or minimize damage to IPC material during all phases of handling, transportation, storage, and installation.

 This standard recommended practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incompatible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbandment) reduces coating effectiveness and results in premature coating failure. To minimize coating damage and prolong coating life, special handling and operating procedures must be utilized with IPC material during all phases of storage, transport, installation, and operation.

Following the guidelines presented in this standard will help users, oil and gas producers, transportation companies, workover companies, and well-servicing companies and personnel to ensure the most cost-effective use of IPC material.

This standard was originally prepared in 1991 by NACE Task Group T-1G-4, a component of Unit Committee T-1G on Protective Coatings, Elastomers, and Other Nonmetallic Materials for Oilfield Use. It was reviewed by T-1G and reaffirmed in 1996, and is published by NACE International under the auspices of Group Committee T-1 on Corrosion Control in Petroleum Production.

Historical Document 1996

 

1.1 This standard presents guidelines for the proper care, handling, and installation of IPC oilfield tubular goods and accessories.

1.2 The function of the internal coating system is to form a protective barrier between the metal surface and the environment to prolong the useful life of the tubular goods and accessories.

1.3 If the coating is damaged during storage, handling, transportation, or installation, the protective barrier may be broken. This reduces coating performance and may result in premature failure.

1.4 This standard addresses specific areas of concern to help prevent or minimize damage to IPC material during all phases of handling, transportation, storage, and installation.

 This standard recommended practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incompatible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbandment) reduces coating effectiveness and results in premature coating failure. To minimize coating damage and prolong coating life, special handling and operating procedures must be utilized with IPC material during all phases of storage, transport, installation, and operation.

Following the guidelines presented in this standard will help users, oil and gas producers, transportation companies, workover companies, and well-servicing companies and personnel to ensure the most cost-effective use of IPC material.

This standard was originally prepared in 1991 by NACE Task Group T-1G-4, a component of Unit Committee T-1G on Protective Coatings, Elastomers, and Other Nonmetallic Materials for Oilfield Use. It was reviewed by T-1G and reaffirmed in 1996, and is published by NACE International under the auspices of Group Committee T-1 on Corrosion Control in Petroleum Production.

Historical Document 1996

 

Product tags
Also Purchased
Picture for Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations
Available for download

RP0475-1975, Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations

Product Number: 53028-HD1975
Author: NACE
Publication Date: 1975
$179.00

HISTORICAL DOCUMENT. Selecting corrosion resistant metallic materials for supply, storage, pumping and injection of water encountered in oil field operations. Historical Document 1975
MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996
Available for download

MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996

Product Number: 21301-HD1995
Author: NACE International
Publication Date: 1995
$179.00

Material requirements for three types of polyolefin-based, cold-applied tapes used in coating pipelines - including pressure-sensitive and butyl-laminate tapes. Historical Document 1995
NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators
Available for download

NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

Product Number: 21391-HD1995
Publication Date: 1995
$179.00

Factors that make electrical substation painting unique.  Worker safety and painting of radiators.  Providing owners, engineers, and maintenance personnel with sample specifications that they may modify to meet their specific requirements. Historical Document 1995
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support