Menu
Search
Filters
Close
Menu

Synthesis of Silane-Modified Nanoparticles-Based Corrosion Inhibitor for Acidic Corrosion

Picture for Synthesis of Silane-Modified Nanoparticles-Based Corrosion Inhibitor for Acidic Corrosion
Available for download

Acidizing process is generally performed on wells to maximize their initial productivity and on aging wells to restore productivity and maximize the recovery of the energy resources. The process involves pumping acid into a wellbore or geologic formation that is capable of producing oil and/or gas. Well acidizing is accomplished by pumping acid into the well to dissolve limestone, dolomite and calcite cement between the sediment grains of the reservoir rocks.

Product Number: 51323-18882-SG
Author: Norah Aljeaban, Bader Alharbi, Ahmed Busaleh, Tawfik A. Saleh
Publication Date: 2023
$0.00
$20.00
$20.00

Corrosion can cause serious metal deterioration and equipment failure in the oil and gas industry and poses a safety hazard. It occurs in presence of an aqueous solution and acidic media when conditions permit. The application of metal protection is one of the most industrially economical methods of controlling metallic corrosion in an acidic environment.
Herein, a silane-modified nanoparticle corrosion inhibitor has been successfully synthesized and characterized by different analysis methods. Silica nanoparticles were fabricated by organosilane composite with carboxylic groups(-COOH) as a terminal group to yield a long polymeric chain attached to the surface of the silica nanoparticle, which can work as an effective corrosion inhibitor.

Corrosion can cause serious metal deterioration and equipment failure in the oil and gas industry and poses a safety hazard. It occurs in presence of an aqueous solution and acidic media when conditions permit. The application of metal protection is one of the most industrially economical methods of controlling metallic corrosion in an acidic environment.
Herein, a silane-modified nanoparticle corrosion inhibitor has been successfully synthesized and characterized by different analysis methods. Silica nanoparticles were fabricated by organosilane composite with carboxylic groups(-COOH) as a terminal group to yield a long polymeric chain attached to the surface of the silica nanoparticle, which can work as an effective corrosion inhibitor.

Product tags
Also Purchased
Picture for Qualification of Low Temperature Cure, Thin-Film Linings for Aboveground Storage Tanks
Available for download

Qualification of Low Temperature Cure, Thin-Film Linings for Aboveground Storage Tanks

Product Number: 51323-18767-SG
Author: Haralampos Tsaprailis, Shan Rao, Jiajun Liang
Publication Date: 2023
$20.00

This paper presents the laboratory qualification program utilized to compare four lining systems for application down to -10°C (14°F). The lining systems were applied and cured at -10 °C (14 °F). Cure of the lining systems was monitored using differential scanning calorimetry and adhesion testing, while the performance of the linings was evaluated using electrochemical impedance spectroscopy, and autoclave and standard atlas cell testing. One of the four lining systems, Product C, a 71% volume solids epoxy that contained zinc phosphate, exhibited the most potential for low temperature field implementation.
Picture for Bio Fuel Feedstock and Finish products – Linings Case Study
Available for download

Bio Fuel Feedstock and Finish products – Linings Case Study

Product Number: 51323-18898-SG
Author: Ravi Nagarajan, Steve Liebhart, Pedro Escudero, Shahab Soltaninia
Publication Date: 2023
$20.00

There is a sizable push for making more sustainable, renewable, and environmentally friendly fuels. One such example is the recent emphasis on manufacturing biofuels in the form of biodiesel or bio-oil. While ethanol is also considered a biofuel and likely the most widely used it will not be a focus of this discussion.
Picture for Chloride-induced Corrosion of Reinforcing Steels Used in Concrete Structures at Various Temperatures
Available for download

Chloride-induced Corrosion of Reinforcing Steels Used in Concrete Structures at Various Temperatures

Product Number: 51323-18920-SG
Author: Nafiseh Ebrahimi, Jieying Zhang, and Amin Ghaziaskar
Publication Date: 2023
$20.00

Steel rebar in concrete is in a passive state due to the high pH of concrete. The hydroxyl (OH-) ions in highly alkaline concrete pore solution act as inhibitors and promote passive film stability, while chloride ions lead to passive film breakdown. Leckie and Uhlig1 first explained the counter effect of inhibitor action with chloride concentration. They proposed a competition between the inhibitor and chloride anions for adsorption on the passive surface.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support