Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

ANSI/NACE MR0175-HD1997-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment 1998

ANSI/NACE MR0175-HD1997-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment 1998
Available for download

Metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment in H2S-bearing hydrocarbon service. Historical Document 1997

Product Number: 21302-HD1997
ISBN: 1-57590-021-1
Author: NACE
Publication Date: 1997
Industry: Oil and Gas Production
$179.00
$179.00
$179.00

This standard presents metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service. This standard is applicable to the materials and/or equipment specified by the materials standards institutions listed in Table 5 (or by equivalent standards or specifications of other agencies). This standard does not include and is not intended to include design specifications. Other forms of corrosion and other modes of failure, although outside the scope of this standard, should also be considered in design and operation of equipment. Severely corrosive conditions may lead to failures by mechanisms other than SSC and should be mitigated by corrosion inhibition or materials selection, which are outside the scope of this standard. For example, some lower- strength steels used for pipelines and vessels may be subjected to failure by blister cracking or stepwise cracking as a result of hydrogen damage associated with general corrosion in the presence of H2S. Also, austenitic stainless steels and even more highly alloyed materials may fail by a type of chloride stress corrosion cracking that is promoted by elevated temperature, aggravated in some cases by the presence of H2S.

Historical Document 1997

This standard presents metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service. This standard is applicable to the materials and/or equipment specified by the materials standards institutions listed in Table 5 (or by equivalent standards or specifications of other agencies). This standard does not include and is not intended to include design specifications. Other forms of corrosion and other modes of failure, although outside the scope of this standard, should also be considered in design and operation of equipment. Severely corrosive conditions may lead to failures by mechanisms other than SSC and should be mitigated by corrosion inhibition or materials selection, which are outside the scope of this standard. For example, some lower- strength steels used for pipelines and vessels may be subjected to failure by blister cracking or stepwise cracking as a result of hydrogen damage associated with general corrosion in the presence of H2S. Also, austenitic stainless steels and even more highly alloyed materials may fail by a type of chloride stress corrosion cracking that is promoted by elevated temperature, aggravated in some cases by the presence of H2S.

Historical Document 1997

Product tags
Also Purchased
Picture for NACE No. 2/SSPC-SP 10-Near-White Metal Blast Cleaning-HD1994
Available for download

NACE No. 2/SSPC-SP 10-HD1994-SG Near-White Metal Blast Cleaning-HD1994

Product Number: 21066-HD1994
Author: NACE SSPC
Publication Date: 1994
$179.00

Requirements for "Near-White Metal" - one of four levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives.  (White Metal, Near-White Metal, Commercial, Brush Off) Historical Document 1994

 
Picture for Metallic and Ceramic Thermal Spray Coatings for Oil and Gas Production Equipment
Available for download

Metallic and Ceramic Thermal Spray Coatings For Oil and Gas Production Equipment

Product Number: 1G191-1991
Publication Date: 1991
$179.00

HISTORICAL DOCUMENT. This technical committee report describes the major thermal spray coatings used in the oil and gas production industry. These coatings include a variety of metallic, ceramic, and cermet materials applied as relatively thin overlays on metallic substrates (components). No attempt is made to be all-inclusive in the coverage of process variants. 
Picture for NACE No. 10-SSPC-PA 6-2002
Available for download

NACE No. 10/SSPC-PA 6, Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks

Product Number: 21093-SG
Publication Date: 2002
$179.00

HISTORICAL DOCUMENT. Procedures to design, apply, and inspect fiberglass-reinforced plastic (FRP) linings on the internal bottoms of aboveground storage tanks (ASTs) in the petroleum/petrochemical industry and in other service.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support