Menu
Search
Filters
Close
Menu

Standards Used for ‘Partial’ Coating Removal During Maintenance Painting

Standards Used for ‘Partial’ Coating Removal During Maintenance Painting
Available for download

Common methods of maintenance painting have either involved complete removal of existing paint (e.g., SSPC-SP 10, Near White Blast Cleaning) or highly localized preparation of corroding areas using power or hand tools (e.g., SSPC-SP 2 or SSPC-SP 3). Sometimes projects may be designed to an intermediate level where the intent is to reduce the surface preparation level of effort by allowing “good” coatings to remain. In these cases, abrasive blasting or ultra-high pressure water jetting may be used to prepare the entire surface, but well adhered aged coating is allowed to remain.

Product Number: 41216-944-SG
Author: J. Peter Ault, Eric Shoyer
Publication Date: 2016
Industries: Coatings , Coatings and Linings
$0.00
$20.00
$20.00

Common methods of maintenance painting have either involved complete removal of existing paint (e.g., SSPC-SP 10, Near White Blast Cleaning) or highly localized preparation of corroding areas using power or hand tools (e.g., SSPC-SP 2 or SSPC-SP 3). Sometimes projects may be designed to an intermediate level where the intent is to reduce the surface preparation level of effort by allowing “good” coatings to remain. In these cases, abrasive blasting or ultra-high pressure water jetting may be used to prepare the entire surface, but well adhered aged coating is allowed to remain. There are a number of standards which can be used to describe such work including SSPC-SP 14, SSPC-SP 7, SSPC-WJ 3 and SSPC-WJ 4. The paper will review these standards and discuss common issues associated with their use.

Common methods of maintenance painting have either involved complete removal of existing paint (e.g., SSPC-SP 10, Near White Blast Cleaning) or highly localized preparation of corroding areas using power or hand tools (e.g., SSPC-SP 2 or SSPC-SP 3). Sometimes projects may be designed to an intermediate level where the intent is to reduce the surface preparation level of effort by allowing “good” coatings to remain. In these cases, abrasive blasting or ultra-high pressure water jetting may be used to prepare the entire surface, but well adhered aged coating is allowed to remain. There are a number of standards which can be used to describe such work including SSPC-SP 14, SSPC-SP 7, SSPC-WJ 3 and SSPC-WJ 4. The paper will review these standards and discuss common issues associated with their use.

Product tags
Also Purchased
Standards, Training and Certifications in the Marine Coatings Industry
Available for download

Standards, Training and Certifications in the Marine Coatings Industry

Product Number: 41216-948-SG
Author: Earl V. Bowry
Publication Date: 2016
$20.00

This paper will provide information on current SSPC training and certification programs related to industry standards and practical aspects of selecting, specifying, and using coatings safely, effectively and economically to protect structures in harsh marine environments.
An Overview and Comparison of Surface Cleanliness Standards for the Protective Coatings Industry
Available for download

An Overview and Comparison of Surface Cleanliness Standards for the Protective Coatings Industry

Product Number: 41216-965-SG
Author: Nico Frankhuizen
Publication Date: 2016
$20.00

At present multiple standards on blast-cleaned surfaces are in use depending on region and specifications of the project. However, most standards are relatively clear on the description of a surface some overlap each other. These overlaps are often considerate as the norm for the most comparisons between ISO and related documents, however, sometimes are significantly off. Some of these documents will be highlighted to compare the results and their impact on the coating job.
Designing a Maintenance Painting Management Program
Available for download

Designing a Maintenance Painting Management Program

Product Number: 41205-209-SG
Author: Kenneth A. Trimber
Publication Date: 2005
$20.00

Computerized maintenance painting management programs are used to inventory painted items, maintain historical coating data, optimize the scheduling of painting activities, and develop budget estimates for the work. While the sophisticated programs are quite effective, their true benefit is not realized unless someone takes ownership of the program, updates the data every few years, and uses the wealth of planning information that is available.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support