Menu
Search
Filters
Close
Menu

Spray-On Ceramic Insulation Up To 450C And Encapsulating Existing Corrosion Without Sandblast

Spray-On Ceramic Insulation Up To 450C And Encapsulating Existing Corrosion Without Sandblast
Available for download

In the late part of the 1980’s, the inventor worked with the reflective coating companies that made “NASA ceramic paints”. During this time that he worked with the reflective companies, he learned that the formulas used for reflective paints were not made from NASA technology and were only good for light reflection. When the coatings became dirty or tarnished, the coatings did not reflect heat.

Product Number: 41213-776-SG
Author: Joseph Pritchett
Publication Date: 2013
Industry: Coatings
$0.00
$20.00
$20.00

In the late part of the 1980’s, the inventor worked with the reflective coating companies that made “NASA ceramic paints”. During this time that he worked with the reflective companies, he learned that the formulas used for reflective paints were not made from NASA technology and were only good for light reflection. When the coatings became dirty or tarnished, the coatings did not reflect heat.

In the late part of the 1980’s, the inventor worked with the reflective coating companies that made “NASA ceramic paints”. During this time that he worked with the reflective companies, he learned that the formulas used for reflective paints were not made from NASA technology and were only good for light reflection. When the coatings became dirty or tarnished, the coatings did not reflect heat.

Product tags
Also Purchased
Standard of Care’ for Coatings Inspection
Available for download

Standard of Care’ for Coatings Inspection

Product Number: 41213-728-SG
Author: J. Peter Ault
Publication Date: 2013
$20.00

This paper will explore the concept of a “Standard of Care” as applied to coating inspection on industrial coatings projects. Establishing a “Standard of Care” for coating inspection sets an expectation for those providing, procuring or otherwise interacting with inspectors on an industrial coatings job. 
Steps to a More Effective Blasting Operation
Available for download

Steps to a More Effective Blasting Operation

Product Number: 41213-730-SG
Author: Kumar Balan
Publication Date: 2013
$20.00

Shot blasting as a mechanical surface preparation process is widely used in finishing metallic parts. Sophistication in the use of this technique could range from simple manual systems to computer-controlled equipment for preparing aerospace and automotive components. 
Single-Component Polysiloxane Coating for Navy Topsides
Available for download

Single-Component Polysiloxane Coating for Navy Topsides

Product Number: 41213-755-SG
Author: Erick Iezzi, James Martin, Paul Slebodnick, John Wegand, Edward Lemieux
Publication Date: 2013
$20.00

Silicone alkyds have been utilized by the Navy for over 50 years and remain the only single-component technology that is qualified under MIL-PRF-24635. Although the predominant coating in the Fleet, silicone alkyd coatings continue to provide poor color and gloss retention, poor chemical resistance, low hardness, slow cure times and limited cleanability to running rust. 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support