Menu
Search
Filters
Close
Menu

SP21424-2018-SG, “Alternating Current Corrosion on Cathodically Protected Pipelines: Risk Assessment, Mitigation, and Monitoring”

  • /
  • /
  • /
  • SP21424-2018-SG, “Alternating Current Corrosion on Cathodically Protected Pipelines: Risk Assessment, Mitigation, and Monitoring”
Picture for SP21424-2018, “Alternating Current Corrosion on Cathodically Protected Pipelines: Risk Assessment, Mitigation, and Monitoring”
Available for download

This standard practice presents guidelines and procedures for use during risk assessment, mitigation, and monitoring of corrosion on underground, cathodically protected steel piping systems caused by proximity to alternating current (AC) power supply systems.

Product Number: 21424-SG
ISBN: 1-57590-384-9
Publication Date: 2018
Industries: Cathodic Protection , Pipelines, Tanks, and Underground Systems
$109.00
$109.00
$109.00

Or

This standard practice presents guidelines and procedures for use during risk assessment, mitigation, and monitoring of corrosion on underground, cathodically protected steel piping systems caused by proximity to alternating current (AC) power supply systems.

 

As shared right-of-way and utility corridor practices become more common, AC influence on adjacent metallic structures has greater significance, and corrosion due to AC influence becomes of greater concern. This standard is not intended to supersede or replace existing corrosion control standards, but rather to complement these standards when the influence of AC-powered systems becomes significant.

 

The effects of lightning and AC power transmission systems on human safety are not covered by this standard. However, the mitigation measures implemented for safety and system protection, as outlined in NACE SP0177, can also be used for AC corrosion control and are cited whenever feasible.

 

Key words: Cathodic protection, alternating current (AC), pipeline, corrosion

 

This standard practice presents guidelines and procedures for use during risk assessment, mitigation, and monitoring of corrosion on underground, cathodically protected steel piping systems caused by proximity to alternating current (AC) power supply systems.

 

As shared right-of-way and utility corridor practices become more common, AC influence on adjacent metallic structures has greater significance, and corrosion due to AC influence becomes of greater concern. This standard is not intended to supersede or replace existing corrosion control standards, but rather to complement these standards when the influence of AC-powered systems becomes significant.

 

The effects of lightning and AC power transmission systems on human safety are not covered by this standard. However, the mitigation measures implemented for safety and system protection, as outlined in NACE SP0177, can also be used for AC corrosion control and are cited whenever feasible.

 

Key words: Cathodic protection, alternating current (AC), pipeline, corrosion

 

Product tags
Also Purchased
Picture for Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Syste
Available for download

TM0101-2012-SG Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems

Product Number: 21240-SG
ISBN: 1-57590-137-4
Publication Date: 2012
$109.00

Measurement techniques and precautions commonly on underground tanks to determine if compliance with a specific criterion has been achieved.

 
Picture for SP0286-2007
Available for download

SP0286-2007-SG (formerly RP0286), Electrical Isolation of Cathodically Protected Pipelines

Product Number: 21032-SG
ISBN: 1-57590-041-6
Publication Date: 2007
$109.00

Requirements to ensure adequate isolation of cathodically protected pipelines, especially those with high-quality dielectric coatings. 
Picture for SP0169-2013
Available for download

NACE SP0169-2013 (formerly RP0169), "Control of External Corrosion on Underground or Submerged Metallic Piping Systems"

Product Number: 21001-SG
Publication Date: 2013
$179.00

HISTORICAL DOCUMENT. Standard for achieving effective control of external corrosion on buried or submerged metallic piping systems or other buried metallic structures.  System design. Coatings. Cathodic protection criteria & installation.  Control of interference currents.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support