Menu
Search
Filters
Close
Menu

RP0592-1992, Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

Picture for RP0592-Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service-HD1992
Available for download

Procedure for the application of a coating system to the interior surfaces of...railroad steel tank cars used...in the transportation of concentrated (90 to 98%) sulfuric acid at ambient temperatures. Historical Document 1992

Product Number: 53091-HD1992
Author: NACE International
Publication Date: 1992
Industry: Coatings and Linings
$179.00
$179.00
$179.00

This recommended practice has been prepared to address the need for high quality application of coatings to the interior surfaces of rail tank cars handling shipments of concentrated sulfuric acid at ambient temperatures. Qualified inspection of the completed coating system and testing by the use of adequate, readily available instruments are also covered in this recommended practice.

This recommended practice emphasizes that corrosion is a major factor that must be considered in the design of tank cars transporting concentrated sulfuric acid. In addition to adhering to the conditions set forth in this document, these tank cars must comply with U.S. Department of Transportation (DOT) Specification DOT 111 A 100W2 and Association of American Railroads (MR) standards, and minimum as-built wall thicknesses should be 11 mm (0.435 in.). This document is not meant to provide a full treatise on corrosion of steel by concentrated sulfuric acid; this is an extensive subject in its own right and for further information the reader is referred to data published by NACE and other sources.

This NACE standard was developed by Task Group T-14C-1, a component of Unit Committee T-14C on Rail Equipment Corrosion, and is issued by NACE under the auspices of Group Committee T-14 on Corrosion in the Transportation Industry.

1 .1 This standard describes a procedure for the application of a coating system to the interior surfaces of new and used railroad steel tank cars used primarily in the transportation of concentrated (90 to 98%) sulfuric acid at ambient temperatures.

For the purpose of this standard, concentrated H2SO4 is considered to be 90 to 98%.

Historical Document 1992

This recommended practice has been prepared to address the need for high quality application of coatings to the interior surfaces of rail tank cars handling shipments of concentrated sulfuric acid at ambient temperatures. Qualified inspection of the completed coating system and testing by the use of adequate, readily available instruments are also covered in this recommended practice.

This recommended practice emphasizes that corrosion is a major factor that must be considered in the design of tank cars transporting concentrated sulfuric acid. In addition to adhering to the conditions set forth in this document, these tank cars must comply with U.S. Department of Transportation (DOT) Specification DOT 111 A 100W2 and Association of American Railroads (MR) standards, and minimum as-built wall thicknesses should be 11 mm (0.435 in.). This document is not meant to provide a full treatise on corrosion of steel by concentrated sulfuric acid; this is an extensive subject in its own right and for further information the reader is referred to data published by NACE and other sources.

This NACE standard was developed by Task Group T-14C-1, a component of Unit Committee T-14C on Rail Equipment Corrosion, and is issued by NACE under the auspices of Group Committee T-14 on Corrosion in the Transportation Industry.

1 .1 This standard describes a procedure for the application of a coating system to the interior surfaces of new and used railroad steel tank cars used primarily in the transportation of concentrated (90 to 98%) sulfuric acid at ambient temperatures.

For the purpose of this standard, concentrated H2SO4 is considered to be 90 to 98%.

Historical Document 1992

Product tags
Also Purchased
Picture for RP0291-Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories-HD1996
Available for download

RP0291-HD1996-SG Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories-HD1996

Product Number: 21049-HD1996
ISBN: N/A
Publication Date: 1996
$179.00

Internal plastic coatings material and includes sections on storage (yard and well/job sites), transportation, tubular goods and accessory installation, operation, and inspection/quality control. HISTORICAL COPY.
Picture for RP0290-Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures-HD1990
Available for download

RP0290-1990, Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures

Product Number: 53072-HD1990
Author: NACE International
Publication Date: 1990
$179.00

HISTORICAL DOCUMENT. Cathodic protection (CP) of reinforcing steel in concrete structures. Impressed current CP systems for atmospherically exposed reinforced concrete. Not valid for pre-stressed. Historical Document 1990
Picture for RP0288-Inspection of Linings on Steel and Concrete-HD1994
Available for download

RP0288-HD1994-SG Inspection of Linings on Steel and Concrete-HD1994

Product Number: 21039-HD1994
Author: NACE International
Publication Date: 1994
$179.00

Preparing inspection specifications including methods, standards and acceptance criteria.  Documentation. Reporting. Pre-job conference. Equipment.  Surface preparation. Mixing. Application Final inspection. Historical Document 1994
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support