Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

RP0281-HD1993-SG Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures-HD1993

Picture for RP0281-Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures-HD1993
Available for download

Guidelines for establishing standard procedures for test panel selection, surface preparation, coating application, field exposure sites and conditions, and the grading and evaluation of panels. Historical Document 1993

Product Number: 21026-HD1993
Author: NACE International
Publication Date: 1993
Industry: Coatings and Linings
$179.00
$179.00
$179.00

This NACE International standard recommended practice was prepared to provide guidelines for establishing standardized procedures for selecting test panels, preparing and painting the surfaces of panels, selecting test sites, and grading and evaluating panels in atmospheric exposure. Such standardization procedures are needed for meaningful comparisons of paint panel tests.

The recommendations in this document apply only to atmospheric exposure and specifically exclude immersion testing and laboratory testing. Standards and other recommendations relating to the procedures described herein are listed in an appendix of this recommended practice.

This recommended practice for panel evaluation testing in atmospheric exposures was originally prepared by NACE Task Group T-6H-25 of Unit Committee T-6H on Coating Materials for Atmospheric Service, and later transferred to Task Group T-6Q-16 of Unit Committee T-60 on Quality Assurance of

Protective Coating Materials and Their Application. The members of Task Group T-60-16 included representatives from consulting firms, users of protective coatings, and coating manufacturers. This standard was editorially updated in 1993 by Unit Committee T-6H and is issued the auspices of Group Committee T-6 on Protective Coatings and Linings. This standard provides minimum procedural guidelines for all parties concerned with the field performance evaluation of protective coating systems. 

1.1 This recommended practice provides guidelines for establishing standard procedures for test panel selection, surface preparation, coating application, field exposure sites and conditions, and the grading and evaluation of panels.

Appendixes A, B, and C provide example forms that may be used in conjunction with these recommendations. Appendix D provides a list of standards and other information related to panel testing.

1.2 While many of these recommendations may be appropriate for testing in an environment other than atmospheric (such as accelerated weathering, salt fog, fume chambers, etc.), they are specifically intended for test panel evaluation in an atmospheric exposure. These recommendations are not intended to be used for laboratory testing, immersion testing, etc.

1.3 Preliminary screening of coating systems may be more efficiently and economically accomplished by laboratory testing. Also, superior performance of a coating system on a test panel in an atmospheric environment does not ensure that equivalent performance will be attained during actual field application and service.

 Historical Document 1993

This NACE International standard recommended practice was prepared to provide guidelines for establishing standardized procedures for selecting test panels, preparing and painting the surfaces of panels, selecting test sites, and grading and evaluating panels in atmospheric exposure. Such standardization procedures are needed for meaningful comparisons of paint panel tests.

The recommendations in this document apply only to atmospheric exposure and specifically exclude immersion testing and laboratory testing. Standards and other recommendations relating to the procedures described herein are listed in an appendix of this recommended practice.

This recommended practice for panel evaluation testing in atmospheric exposures was originally prepared by NACE Task Group T-6H-25 of Unit Committee T-6H on Coating Materials for Atmospheric Service, and later transferred to Task Group T-6Q-16 of Unit Committee T-60 on Quality Assurance of

Protective Coating Materials and Their Application. The members of Task Group T-60-16 included representatives from consulting firms, users of protective coatings, and coating manufacturers. This standard was editorially updated in 1993 by Unit Committee T-6H and is issued the auspices of Group Committee T-6 on Protective Coatings and Linings. This standard provides minimum procedural guidelines for all parties concerned with the field performance evaluation of protective coating systems. 

1.1 This recommended practice provides guidelines for establishing standard procedures for test panel selection, surface preparation, coating application, field exposure sites and conditions, and the grading and evaluation of panels.

Appendixes A, B, and C provide example forms that may be used in conjunction with these recommendations. Appendix D provides a list of standards and other information related to panel testing.

1.2 While many of these recommendations may be appropriate for testing in an environment other than atmospheric (such as accelerated weathering, salt fog, fume chambers, etc.), they are specifically intended for test panel evaluation in an atmospheric exposure. These recommendations are not intended to be used for laboratory testing, immersion testing, etc.

1.3 Preliminary screening of coating systems may be more efficiently and economically accomplished by laboratory testing. Also, superior performance of a coating system on a test panel in an atmospheric environment does not ensure that equivalent performance will be attained during actual field application and service.

 Historical Document 1993

Product tags
Also Purchased
Picture for TM0183-2006 Historical Document-Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
Available for download

TM0183-HD2006-SG Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment-HD2006

Product Number: 21213-HD2006
ISBN: 1-57590-100-5
Author: NACE International
Publication Date: 2006
$179.00

Provides manufacturers, applicators, and users of internal pipe coatings with a method of comparing the performance of these coatings.  Historical Document 2006
Picture for TM0498-2014 Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture
Available for download

TM0498-HD2014-SG Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture-HD2014

Product Number: 21235-HD2014
Publication Date: 2014
$179.00

Historical Document. Two methods of evaluating relative carburization resistance of alloys used in ethylene cracking furnace tubes.  Standardized data that allows evaluation of tube supplier carburization data.
Picture for TM0399-2005 Standard Test Method for Phosphonate in Brine
Available for download

TM0399-HD2005-SG Standard Test Method for Phosphonate in Brine

Product Number: 21238-HD2005
ISBN: 1-57590-084-X
Author: NACE International
Publication Date: 2005
$179.00

 This standard is intended for use in analyzing low concentrations of phosphonate in brine containing interfering elements.  Historical Document 2005

 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support