AMPP Store - Refinery/Gas Processing

Available for download

NACE SP0403-2023, Avoiding Caustic Stress Corrosion Cracking of Refinery Equipment and Piping

Product Number: NACE SP0403-2023

Publication Date: 2023

$109.00

This standard practice is intended to provide guidance to those designing, fabricating, and/or maintaining refinery equipment and piping that are exposed to caustic environments.

Caustic is used in many petroleum refinery applications in a wide range of concentrations and temperatures. Caustic stress corrosion cracking (SCC) of carbon steel (CS) equipment has been reported in industry since the 1930s, e.g., in riveted steam boilers. NACE has published guidance for handling sodium hydroxide (NaOH) in the form of a “Caustic Service Chart” since at least the mid-1960s.

Available for download

NACE TM21420-2023, Test Method for Measurement of Peel Strength of Multilayer Polyolefin Coating Systems

Product Number: NACE TM21420-2023

Publication Date: 2023

$109.00

This test method describes a reliable methodology for determining the peel strength of polyolefin-based multilayer pipeline coating systems, generally for coating thickness less than 12 mm (0.47 in). This standard provides a method to measure the peel strength of polyolefin-based multilayer coating systems, such as 2-layer polyethylene coating (2LPE), 3-layer polyethylene (3LPE), 3-layer polypropylene (3LPP), and heat shrink sleeve (HSS) field joint coating. It provides essential information on the quality of the applied coating. This is particularly important for field-applied coatings, of which the application process is significantly impacted by the environmental conditions and the skill set of the field applicators.

Available for download

NACE TR34109-2023, Crude Distillation Unit—Distillation Tower Overhead System Corrosion

Product Number: NACE TR34109-2023

Publication Date: 2023

$109.00

This technical report describes the associated corrosion mechanisms in refinery crude distillation unit (CDU) distillation tower overhead systems and current industry practices for mitigating or controlling this corrosion. Distillation towers in a typical CDU include a pre-flash tower, an atmospheric tower, and a vacuum tower. Feedstock, unit configurations, and associated process variables are addressed, from the crude oil storage tanks to the distillation tower overhead drums.

Available for download

Peabody's Control of Pipeline Corrosion, 3rd Edition (E-Book)

Product Number: 37617-E

ISBN: 978-1-57590-336-1

Author: by A.W. Peabody, edited by Ronald Bianchetti

Publication Date: 2018

$150.00

NEW EDITION!! For nearly 50 years Control of Pipeline Corrosion, written by A.W. Peabody, has been the most trusted resource in the field of pipeline corrosion. Now completely revised and updated, the third edition of this classic reference continues the tradition of excellence by providing the most thorough and authoritative coverage of the prevention and control of pipeline corrosion, and now includes a chapter on AC interference.

Peabody's Control of Pipeline Corrosion, Third Edition, edited by Ronald Bianchetti, blends traditional corrosion engineering practices with modern technologies to make this the single source for corrosion control. Chapters have updated information and graphics to expand on the user-friendly nature of the original book.

2018 NACE E-Book.

Reinforced Concrete Corrosion_eCourse

Product Number: RCC_eCourse

$325.00

In the early morning hours of June 24, 2021, the Champlain Towers Condominium partially collapsed resulting in the loss of 98 lives. The almost 40-year-old structure was built using reinforced concrete and exhibited signs of corrosion.

While the federal investigation continues, AMPP has created this eCourse, using this event as the backdrop and case study, to raise awareness of the significant threat reinforced concrete corrosion can cause.

This course provides a high-level overview of how to protect, inspect, and repair reinforced concrete structures. It does not, however, explain the reason for the collapse or provide any information not publicly available.

Users should spend approximately four hours to complete and earn four hours of Professional Development (PDHs). The course also includes:

- Learning Activities

- In-course Knowledge Checks

- Recommended readings

Purchase of this course includes a one-year subscription and is non-refundable. Students will have access to all course materials for a period of one year from the date of registration. All course work must be completed during this time period. Extensions or transfers cannot be granted.

Available for download

SP0472-2020, Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

Product Number: SP0472-2020

ISBN: 1-57590-114-5

Publication Date: 2020

$109.00

This standard establishes guidelines to prevent most forms of environmental cracking of weldments in carbon steel refinery equipment, including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases. Weldments are defined to include the weld deposit, base metal HAZ, and adjacent base metal zones subject to residual stresses from welding. It defines standard practices for producing weldments in P-No. 1 steels resistant to environmental cracking in corrosive petroleum refining environments. This standard is maintained by Task Group 326.

Available for download

SSPC-Paint 16-2023, Coal-Tar Epoxy Polyamide (Black or Dark Red) Coating

Product Number: SSPC-Paint 16-2023

Publication Date: 2023

$109.00

This coating material standard is intended primarily for use by coating manufacturers, specifiers, and applicators. It contains requirements for the formulation of the coating material as well as requirements for material properties of the formulated coating and instructions for proper application of the coating. The coating is intended for use in environments that are not exposed to ultraviolet light. Its use may be restricted in some areas due to its coal tar content.

Refinery/Gas Processing

NACE SP0403-2023, Avoiding Caustic Stress Corrosion Cracking of Refinery Equipment and Piping

NACE TM21420-2023, Test Method for Measurement of Peel Strength of Multilayer Polyolefin Coating Systems

NACE TR34109-2023, Crude Distillation Unit—Distillation Tower Overhead System Corrosion

Peabody's Control of Pipeline Corrosion, 3rd Edition (E-Book)

Reinforced Concrete Corrosion_eCourse

SP0472-2020, Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

SSPC-Paint 16-2023, Coal-Tar Epoxy Polyamide (Black or Dark Red) Coating

Association for Materials Protection and Performance