Menu
Search
Filters
Close
Menu

Products tagged with 'corrosion rate'

View as
Sort by
Display per page
Picture for Internal Corrosion Direct Assessment of a Wet Gas Pipeline
Available for download

51318-11630-Internal Corrosion Direct Assessment of a Wet Gas Pipeline

Product Number: 51318-11630-SG
Author: Xihua S. He / Debashis Basu / and Osvaldo Pensado / Jianyun Mei / Bibo Zhang / Hongbo Wu / Yongzhao Fan / Deqiang Cai / Yang Li
Publication Date: 2018
$20.00

This work applied the Wet Gas-Internal Corrosion Direct Assessment (WG-ICDA) standard to assess the severity of internal corrosion of 2 segments along a pipeline used to transport wet gas from a gas mine.
Picture for A Novel Corrosion Rate Monitoring Method For Steel In Soil Based On Tafel Extrapolation Method
Available for download

A Novel Corrosion Rate Monitoring Method For Steel In Soil Based On Tafel Extrapolation Method

Product Number: 51321-16967-SG
Author: Satoru Yamamoto; Masaru Abe; Kenkichi Tashiro
Publication Date: 2021
$20.00
A real-time matrix based corrosion monitoring system
Available for download

A real-time matrix based corrosion monitoring system

Product Number: 51322-18130-SG
Author: Hanne Martinussen, Fredrik Sandquist
Publication Date: 2022
$20.00

Pipeline integrity management and practices have been systemized through standards(1), and one important aspect in integrity management is corrosion monitoring. Corrosion monitoring by using permanently installed equipment has increased in the past years(2). By using permanently installed ultrasound transducer (UT) sensors and automating signal processing and communication, a more costefficient corrosion management program can be obtained. Ultrasound techniques have been developed to complement traditional inspection with monitoring to improve cost efficiency of pipeline integrity management.
Picture for AC Corrosion of Cathodically Protected Pipelines – Summary
Available for download

AC Corrosion of Cathodically Protected Pipelines – Summary

Product Number: 51321-16299-SG
Author: Dr. Andreas Junker Olesen
Publication Date: 2021
$20.00
Picture for Acquiring and Analyzing Electrical Resistance Probe Data Using Web-Based Remote Monitoring Tools
Available for download

Acquiring and Analyzing Electrical Resistance Probe Data Using Web-Based Remote Monitoring Tools

Product Number: MECC23-19990-SG
Author: Jamey Hilleary
Publication Date: 2023
$20.00

Corrosion rate monitoring techniques, using coupons and probes of various designs and technologies, have been in use for decades in some form or another. Weight-loss coupons were an early type of direct measurement of metal loss to determine the rate of corrosion in many applications, internal and external. These coupons could be placed where corrosion is suspected to be occurring and the rate of corrosion determined by removing and weighing the coupon after a set period.
Picture for Advancement of a Comprehensive Mechanistic CO2 Corrosion Model to Incorporate Simulated Hydrodynamics via a Turbulent Flow Model
Available for download

Advancement of a Comprehensive Mechanistic CO2 Corrosion Model to Incorporate Simulated Hydrodynamics via a Turbulent Flow Model

Product Number: 51324-20657-SG
Author: Michael Jones; Gregory de Boer; Richard Woollam; Joshua Owen; Richard Barker
Publication Date: 2024
$40.00
In this work, two comprehensive mechanistic models of aqueous carbon dioxide (CO2) corrosion produced by Nordsveen et al.1 and Kahyarian et al.2 17 years apart are recreated and compared to highlight the evolution in understanding. The differences between the models include the role of carbonic acid at the surface, whether it is directly reduced or acts as a buffering agent, as well as different mechanisms for the anodic response, and varying temperature responses of multiple input variables. Through recreation and validation of these models using the same software, key comparisons are made to understand the effect of these changes on predicted corrosion rate, surface pH, and speciation through the boundary layers. These values are plotted across a range of input parameters to investigate how the change in scientific understanding influences predictive response of corrosion models.
Picture for An Enhanced Prediction Model For Simultaneous Naphthenic Acid And Sulfidic Corrosion Quantification
Available for download

An Enhanced Prediction Model For Simultaneous Naphthenic Acid And Sulfidic Corrosion Quantification

Product Number: 51322-17901-SG
Author: Winston Robbins, Sridhar Srinivasan, Abbey Wing, Gerrit Buchheim
Publication Date: 2022
$20.00

Sulfur and acidic impurities in crude oils pose serious hot oil corrosion problems in crude distillation units (CDU) and associated vacuum distillation units (VDU), especially with the increase in processing of lowquality, opportunity crudes.1-4   In the range of 200-400˚C, reactive sulfur compounds cause sulfidation corrosion of ferritic carbon and chrome steels in CDU, VDU, and front ends of downstream units operating at hot oil temperatures.5-7 Over the same temperature range, naturally occurring carboxylic acids in crudes can be so aggressive that higher alloy, austenitic stainless steels containing >2.5% Mo are required for processing high acid oils.8-11  Although sulfidation and acid corrosion occur over the same temperature range, they differ in two significant ways.  Sulfidation forms an iron sulfide solid that is semiresistant to further corrosion and relatively insensitive to flow velocity.  Acids form oil soluble organic salts that can be washed away especially in areas of high turbulence.12-14  
Picture for ANSI/NACE TM0416-2016
Available for download

ANSI/NACE TM0416-2016, “Test Method for Monitoring Atmospheric Corrosion Rate by Electrochemical Measurements”

Product Number: 21405-SG
Publication Date: 2016
$179.00

HISTORICAL DOCUMENT. Specification, selection & use of sensors for monitoring atmospheric corrosion.  These sensors - based on electrochemical techniques - provide continuous records of contaminants, corrosion rates, or coating condition.
Picture for ANSI-NACE TM0416-2023-ISO 22858-2020, Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
Available for download

ANSI/NACE TM0416-2023/ISO 22858:2020, Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion

Product Number: ANSI-NACE TM0416-2023-ISO 22858-2020
$140.00

The purpose of this document is to provide instructions on the use of electrochemical sensors for monitoring atmospheric corrosion. These sensors are used to measure thin film electrolyte conductance, corrosion current or coating condition over long periods. This method permits the instantaneous evaluation of corrosion current that can be related to specific environmental conditions in real time. The instantaneous corrosion current measurements are not accessible using electrical resistance sensors or mass loss techniques. The technology described in this document complements other standard techniques for assessing atmospheric corrosion such as mass loss coupons, electrical resistance sensors or coated test panels (see ISO 8407 and ISO 4628-8). These continuous records of material condition can be useful for studying atmospheric corrosion, evaluating materials or managing assets.
Picture for Assessing Comprehensive Mechanistic CO2 Corrosion Modeling Methods and Their Impact on Predicted Corrosion Behavior
Available for download

Assessing Comprehensive Mechanistic CO2 Corrosion Modeling Methods and Their Impact on Predicted Corrosion Behavior

Product Number: 51324-20656-SG
Author: Michael Jones; Gregory de Boer; Richard Woollam; Joshua Owen; Richard Barker
Publication Date: 2024
$40.00
In this work, two comprehensive mechanistic models of aqueous carbon dioxide (CO2) corrosion produced by Nordsveen et al.1 and Kahyarian et al.2 17 years apart are recreated and compared to highlight the evolution in understanding. The differences between the models include the role of carbonic acid at the surface, whether it is directly reduced or acts as a buffering agent, as well as different mechanisms for the anodic response, and varying temperature responses of multiple input variables. Through recreation and validation of these models using the same software, key comparisons are made to understand the effect of these changes on predicted corrosion rate, surface pH, and speciation through the boundary layers. These values are plotted across a range of input parameters to investigate how the change in scientific understanding influences predictive response of corrosion models.
Picture for Calculation Of Surface Speciation On Mild Steel Under Applied Polarization
Available for download

Calculation Of Surface Speciation On Mild Steel Under Applied Polarization

Product Number: 51321-16913-SG
Author: Zheng Ma; Bruce Brown; Srdjan Nesic; Marc Singer
Publication Date: 2021
$20.00
Picture for Combining CP System and Pressure Monitoring at Gas Storage Fields Using Wireless Networked Systems Picture for Combining CP System and Pressure Monitoring at Gas Storage Fields
Available for download

Combining CP System and Pressure Monitoring at Gas Storage Fields Using Wireless Networked Systems

Product Number: 51317--8983-SG
ISBN: 8983 2017 CP
Author: Jamey Hilleary
Publication Date: 2017
$20.00

The presentation discusses use of combined direct monitoring and wireless local networking technologies allowing multiple data types from several locations in a gas storage field to be accessed through a single field device.

 
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support