AMPP Store - Products tagged with 'hydrogen sulfide'

Available for download

Prediction and Assessment of Ammonium Bisulfide Corrosion Under Refinery Service Conditions - Part 3

Product Number: 51317--8929-SG

ISBN: 8929 2017 CP

Author: Richard Horvath

Publication Date: 2017

$20.00

Summarizes results from Phase III of the joint industry program (JIP) on refinery alkaline sour water (ammonium bisulfide) corrosion. Phase III included a comprehensive engineering analysis of data from all three phases of the Sour Water JIP.

Available for download

Role of H2S In Localized Corrosion and Cracking of CRAs in Upstream Oil and Gas Applications

Product Number: 51317--9463-SG

ISBN: 9463 2017 CP

Author: Gareth Hinds

Publication Date: 2017

$20.00

Materials qualification testing of corrosion resistant alloys (CRAs) typically involves the use of simple pass/fail tests. Modification of existing standards is recommended for environments in which pit initiation is statistically improbable but pit propagation is rapid, e.g. low chloride/high H2S.

Available for download

RP0296-2004 (Chinese), Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

Product Number: 21115-SG

ISBN: 1-57590-013-0

Publication Date: 2004

$179.00

检测、修补和缓解炼厂压力容器在湿H2S环境下发生开裂的

DOWNLOADABLE HISTORICAL DOCUMENT. Detection, repair, and mitigation of cracking of carbon steel pressure vessels, including columns, heat exchangers, drums, reboilers & separators in wet H2S petroleum refinery environments.

Available for download

Severe Wastewater Testing Programs for Rapid Evaluation of Coatings and Linings: An update

Product Number: 41208-438-SG

Author: Vaughn O’Dea

Publication Date: 2008

$20.00

High performance protective coatings are often failing in the severe headspace environments of wastewater environments. These failures are attributed to many factors including glow permeability properties to resist H2S and other corrosive gasses present within these environments. Although the chemical and physical properties of coating systems can be determined in the lab, this is not the case for application variables and the effects of environmental factors.

Available for download

Shale Gas Production Pipeline Failure - Case Study

Product Number: 51324-20698-SG

Author: Feras El Yaakobi; Sherman Kung; Connor Graham; Jeannine Schmid; Daryl Foley

Publication Date: 2024

$40.00

Shale gas production is unique and presents challenges in terms of corrosion mitigation and pipeline integrity management. Many of these challenges stem from variations in production modes from the early stages and as the system becomes mature, with many variables involved such as frac flowback, H2S, CO2, iron, microbial, velocities, topography, O2, hydrates, and paraffin. When combined with economic challenges the oil and gas industry faces, these factors force producers to strike a balance between technical decisions and operational/cost efficiencies, which adds complexity to an already difficult-to-manage system. This paper will review a pipeline failure case study from a critical sour shale gas gathering system in Canada. The case study will cover the history of the pipeline from commissioning until failure, challenges faced, root-cause analysis, solutions implemented, and results obtained. The case study will help increase awareness about best practices regarding pipeline pigging, corrosion inhibitor batch treatments, and analytical testing used when conducting failure root cause analysis. It also serves as a documentation for a corrosion failure in a pipeline with a staggering corrosion rate of over 2,800 mpy resulting in a pipeline failure in less than five weeks of operations.

Available for download

Sour or Not Sour? That Is the Question: A Review of The NACE “Sour Limit” – Evolution and Implications for Modern Oil & Gas Production

Product Number: 51321-16626-SG

Author: Eric Caldwell/ Russell Kane/ Brian Chambers

Publication Date: 2021

$20.00

Available for download

Study on Effect of Buffer Capacity on Corrosion Performance of CRAs in Simulated Well Condition

Product Number: 51317--9283-SG

ISBN: 9283 2017 CP

Author: Masayuki Sagara

Publication Date: 2017

$20.00

Methodology to simulate actual oil and gas field condition in laboratory tests. A sulfide stress cracking test is carried out on 13% Cr stainless steel with various buffer solutions. Then, pH behavior was estimated. A suitable composition of the solution is proposed by using thermodynamic calculations.

Available for download

Successful Mothballing And Pickling Of Pipelines And Storage Tanks

Product Number: 51321-16757-SG

Author: Sunder Ramachandran

Publication Date: 2021

$20.00

Available for download

Susceptibility of Plasma Nitrided 17-4 PH to Sulphide Stress Cracking in H2S-Containing Environments

Product Number: 51317--9342-SG

ISBN: 9342 2017 CP

Author: Mario Coseglio

Publication Date: 2017

$20.00

The stainless steel 17-4 PH (H1150D) is a cost-effective alloy for oilfield components due to its combination of high strength, toughness, and good corrosion resistance. Plasma nitriding improves the surface strength of the 17-4 PH and this work suggests that the nitrided can the resistance to SSC.

Available for download

The Development Of Environmentally Acceptable Corrosion Inhibitors For Sour Applications

Product Number: 51322-18006-SG

Author: Jody Hoshowski, Alyn Jenkins, Rolando Perez Pineiro

Publication Date: 2022

$20.00

The decomposition process of ancient marine species in the seabed for millions of years coupled with the presence of specific geological conditions such as high pressures and temperatures led to the formation of what is known today as fossil fuels. For this reason, they can be found either on the earth's surface where ancient seas were located or beneath the seabed. Considering that the ocean covers three-quarters of the Earth's surface the offshore oil and natural gas exploration entail an enormous economic and strategic benefit.¹

Available for download

The Role of Pyrite in Localized Corrosion of Mild Steel

Product Number: 51317--9251-SG

ISBN: 9251 2017 CP

Author: Jing Ning

Publication Date: 2017

$20.00

The formation of greigite and/or pyrite seems to correlate with onset of localized corrosion Experiments involving deposition of pyrite on the steel surface were conducted to investigate if localized corrosion occurs when pyrite is deposited on mild steel in an aqueous H2S environment.

Available for download

TM0198-2020, “Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys for Stress Corrosion Cracking in Sour Oilfield Service”

Product Number: TM0198-2020

ISBN: 1-57590-051-3

Publication Date: 2020

$109.00

This standard establishes a slow strain rate (SSR) test method for screening corrosion-resistant alloys (CRAs) (i.e., stainless steels and nickel-based alloys) for resistance to stress corrosion cracking (SCC) at elevated temperatures in sour oilfield production environments. The SSR test, which is relatively short in duration, incorporates a slow, dynamic strain applied at a constant extension rate. This results in acceleration of the initiation of cracking in susceptible materials, thereby simulating rather severe conditions.

The standard specifies reagents, test specimen, test equipment, determination of baseline material properties, environmental and mechanical test conditions, test procedure, and analysis and reporting of test results. It is intended for use by laboratory investigators for screening CRAs for resistance to SCC in sour oilfield service.

This revision extends the scope of the standard to address the screening of precipitation-hardened nickel-based alloys for resistance to hydrogen induced stress cracking (HISC) using the SSR test method.

Products tagged with 'hydrogen sulfide'

Association for Materials Protection and Performance