AMPP Store - Products tagged with 'ampp annual conference + expo'

Available for download

Incorporating Monte Carlo Analysis into a State-of-the-Art Corrosion Prediction System

Product Number: 51323-18910-SG

Author: Andrew Simm, Daniel Thomas, Gareth John, Steve Hodges

Publication Date: 2023

$20.00

Over the years there have been several different corrosion modelling software packages developed to provide predicted (estimated) corrosion rates for use in the oil & gas industries. Many are based on the original work of DeWaard & Milliams which provided a best-fit statistical model to corrosion rates measured in flow loop laboratory tests conducted at the IFE (Institutt For Energiteknikk) in Norway ; covering (initially) just partial pressure of CO2, temperature, liquid flow velocity and pH (typically as bicarbonate and dissolved CO2).

Available for download

Induction Time Modeling for Common Scaling Minerals in the Absence and Presence of Inhibitors Using a Novel Theoretical Framework

Product Number: 51323-18805-SG

Author: Gaurav Das, Ronald D. Springer, Jerzy Kosinski, Andre Anderko

Publication Date: 2023

$20.00

Mineral scale deposition resulting from waterflooding processes and chemical treatment operations is one of the common issues in upstream oil and gas production. It can lead to significant flow assurance problems as scaling in the reservoirs, wellbores, well casings, oil pipelines, and other production facilities may cause considerable equipment damage and production loss while interfering with corrosion management. Scale usually deposits as a combination of different mineral phases due to the changes in solution conditions such as the saturation level, temperature, pressure, and pH.

Available for download

Inductive and DC Stray Current Interference from Different HVDC Transmission Line Systems on Metallic Pipelines

Product Number: 51323-18925-SG

Author: Boshra Momen Nejad, Brandon Miller

Publication Date: 2023

$20.00

Back in 2018, we published a paper on a joint industrial R&D project, during which we performed detailed field measurements on selected pipeline segments in close vicinity to a High Voltage Direct Current (HVDC) transmission line during planned staged fault tests on the power line. Induced voltages on these pipelines were recorded during the HVDC staged fault process, which was conducted by the utility company. The measurement results from these tests were used for further validation or modification of an existing industrial guideline that focuses on the influence of HVDC power lines on metallic pipelines. Verification of future modeling results was another expected outcome of this study.

Available for download

Influence of Alloying Elements on the Electrochemical Behavior of Cantor High Entropy Alloys in Chloride Solutions

Product Number: 51323-18924-SG

Author: Emily Seto, Jing Liu, Haoxiang Wang

Publication Date: 2023

$20.00

Multi-principle element alloys (MPEAs) represent a new alloy development philosophy, where the base alloy has significant atom fractions of several elements. Among MPEAs, high entropy alloys (HEAs) are defined as alloys containing 5 or more principle elements. In 2004 Cantor et al. introduced Fe20Co20Cr-20Ni20Mn20 (H4Mn20), a 5-element equimolar HEA. It was found that this alloy formed a single FCC solid solution and solidified dendritically.

Available for download

Influence Of Brine Precipitates On Materials Performance In Geothermal Applications

Product Number: 51323-18813-SG

Author: Anastasia Stoljarova, Ralph Bäßler, Simona Regenspurg

Publication Date: 2023

$20.00

Since geothermal reservoirs are a feasible energy source to replace fossil fuel supply, many technologies have been developed to take advantage of geothermal energy. Nevertheless, due to the chemical composition of hydrothermal fluids and temperatures, service conditions in geothermal facilities are demanding in many cases in terms of corrosion. Therefore, materials selection based on preliminary material qualification is essential to guarantee a secure and reliable operation of the facilities.

Available for download

Influence of Experimental Injection Method on the Inhibition Efficiency of Volatile Corrosion Inhibitors for Top-of-the Line Corrosion Mitigation

Product Number: 51323-19452-SG

Author: Maryam Eslami, Marc Singer

Publication Date: 2023

$20.00

In oil and gas industry, during the transportation of wet gas with a stratified flow regime, the temperature difference between the fluid inside the pipelines and the surrounding environment leads to condensation of water on the upper internal surface and causes metal degradation. This phenomenon is known as Top-of-the-Line Corrosion or TLC.

The condensing phases can consist of not only water but also condensable hydrocarbons.

Available for download

Influence of grout conditions on duct-to-strand galvanic coupling within bonded internal posttensioned tendons

Product Number: 51323-19371-SG

Author: David Dukeman, Dr. Christopher Alexander

Publication Date: 2023

$20.00

External post-tensioned tendons are used in segmental precast box girder bridge construction to hold segments together and prevent service cracking. The tendons consist of multiple 7-wire prestressing strands contained within a high-density Polyethylene (HDPE) duct located within the inner opening of the box girders. They run continuously through deviator blocks, which helps form the profile of the tendon.

Available for download

Influence of Hydrocarbon on Stearic Acid as Corrosion Inhibitor in Synthetic Brine

Product Number: 51323-19330-SG

Author: Susumu Hirano, Tatsuya Sei

Publication Date: 2023

$20.00

Corrosion inhibitors are used for carbon steel pipelines in the oil and gas industry. Based on current
understanding, the inhibitor molecules mitigate corrosion through adsorption to the internal surface of
the pipeline, forming a barrier film that impedes electrochemical corrosion reactions at the metal
surface. Micellization is a key factor of the surfactant distributions.

Available for download

Influence of Impurity Adsorption and Condensation on the Initial Corrosion Mechanism of CO2 Transport Pipeline Steel

Product Number: 51323-19066-SG

Author: Minghe Xu, Yoon-Seok Choi, Srdjan Nesic

Publication Date: 2023

$20.00

CO2 captured from different sources for carbon capture and storage (CCS) will contain impurities. Although it is technologically possible to treat CO2 to near 100% purity in the gas conditioning process, it is preferable to have fewer rigid specifications to reduce both operational and capital costs. From a corrosion point of view, SOx, NOx, H2S, and O2 are considered to be the most aggressive impurities.

Available for download

Influence of Operating Temperature on the Corrosion of UNS S30400 Steel under Catalytic Hydrodeoxygenation of Pyrolysis Oil by Supercritical Ethanol with In-situ Hydrogen Source

Product Number: 51323-19012-SG

Author: Mingyuan Zhang, Minkang Liu, Xue Han, Yimin Zeng, Chunbao Xu

Publication Date: 2023

$20.00

Bio-oils are renewable and clean energy sources, which can be used to partial or completely replace fossil fuel. Fast pyrolysis is a promising and by far the only industrially realized approach to convert dry biomass into biofuels, particularly the liquid bio-oils. However, the poor quality of fast pyrolysis oil including thermal instability, high viscosity and acidity, high oxygen and water content, and low heating value makes it hard to be directly used as transportation fuels.

Available for download

Inhibiting localized corrosion of carbon steel pipelines in sour service

Product Number: 51323-18833-SG

Author: Anupom Sabhapondit, Aboubakr M Abdullah, Nicholas Laycock, Manoj Gonuguntla, Shimjith Madayi, Tom Bos

Publication Date: 2023

$20.00

Use of corrosion inhibitors (CI) to protect metallic equipment, especially carbon steel pipelines from corrosion has long been an established, effective, economic, and hence globally accepted technique. The oil and gas industry has been using CIs to protect the pipelines under various exposure conditions including sour and sweet services . Complete understanding of corrosion mechanisms under sour conditions and protecting pipeline steel under such conditions has always been a challenging task due to the complexity of such systems.

Available for download

Inhibition of Crevice Corrosion of Ni-Cr-Mo Alloys by Sulfate, Nitrate and Molybdate

Product Number: 51323-18936-SG

Author: Eduardo Sáenz González, Martín A. Rodríguez, Edgar C. Hornus

Publication Date: 2023

$20.00

Nickel base alloys with high chromium and molybdenum contents are very resistant to chloride-induced localized corrosion, even at relatively high temperatures. These alloys include the Ni-Cr-Mo(W) or
“C” family of alloys and the novel Ni-Mo-Cr alloy HYBRID-BC1 (UNS N10362). Alloy 22 (UNS N06022) stands out due to its versatility: chromium and molybdenum contents were selected to optimize its corrosion behavior in oxidizing and reducing conditions. Alloy 625 (UNS N06625) has outstanding thermal ageing resistance and a longer in-service experience. The

Products tagged with 'ampp annual conference + expo'

Association for Materials Protection and Performance