AMPP Store - Products tagged with 'developed by sc 05'

Available for download

SSPC-AB 4-2023, Recyclable Encapsulated Abrasive Media (in a Compressible Cellular Matrix)

Product Number: SSPC-AB 4-2023

Publication Date: 2023

$109.00

This standard provides requirements for selecting and evaluating abrasive media encapsulated in a compressible non-uniform cellular matrix used to blast clean steel and other surfaces prior to the application of protective coatings. The standard also includes requirements for quality control of new and recycled media.

Available for download

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

Product Number: SSPC-SP 10/NACE No. 2-2024

Publication Date: 2024

$109.00

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a) to remove material from the surface that can cause early failure of the coating, and

b) to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

Degree of Surface Cleanliness	Designation
White Metal Blast Cleaning	SSPC-SP5/NACE No. 1
Near-White Metal Blast Cleaning	SSPC-SP10/NACE No. 2
Commercial Blast Cleaning	SSPC-SP6/NACE No. 3
Industrial Blast Cleaning	SSPC-SP14/NACE No. 8
Brush-Off Blast Cleaning	SSPC-SP7/NACE No. 4
Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance	SSPC-SP18

Available for download

SSPC-SP 13/NACE No. 6-2003, Surface Preparation of Concrete

Product Number: SSPC-SP 13/NACE No. 6-2003

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-SP 16-2010, Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steels, and Non-Ferrous Metals

Product Number: SSPC-SP 16-2010

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This standard covers surface preparation of coated or uncoated metal surfaces other than carbon steel prior to the application of a protective coating system. Surface preparation using this standard is used to uniformly roughen and clean the bare substrate and to roughen the surface of intact coatings on these metals prior to coating application. Substrates that may be prepared by this method include, but are not limited to, galvanized surfaces, stainless steel, copper, aluminum, and brass. For the purpose of this standard, the zinc metal layer of hot-dip galvanized steel is considered to be the substrate, rather than the underlying steel. This standard is not to be used for cleaning coated or uncoated carbon steel substrates.

Available for download

SSPC-TR 2/NACE TR6G198-2023, Wet Abrasive Blast Cleaning

Product Number: SSPC-TR 2/NACE TR6G198-2023

Publication Date: 2023

$109.00

This technical report discusses equipment, procedures, materials, and the resulting substrate conditions involved in a variety of WAB cleaning methods currently available for commercial use. It also discusses the effect that the water present with these wet cleaning methods has on achieving the defined degree of cleaning of steel surfaces in accordance with the wet abrasive blast cleaning standards found in the list of Referenced Standards and Other Consensus Documents. It is intended for use primarily by specifiers, owners, painting contractors, inspectors, and others involved in surface preparation of industrial structures.

This report was originally issued in 1998 and has been revised to include additional configurations of equipment setup as well as current (2022) developments in the design of wet abrasive blast cleaning systems and nozzles. This TR provides a foundation to assist users to determine the quantity and quality of water, abrasive, and air.

Products tagged with 'developed by sc 05'

SSPC-AB 4-2023, Recyclable Encapsulated Abrasive Media (in a Compressible Cellular Matrix)

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

SSPC-SP 13/NACE No. 6-2003, Surface Preparation of Concrete

SSPC-SP 16-2010, Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steels, and Non-Ferrous Metals

SSPC-TR 2/NACE TR6G198-2023, Wet Abrasive Blast Cleaning

Association for Materials Protection and Performance