AMPP Store - Products tagged with 'surface preparation'

SSPC Pocket Guide to Coating Information

Product Number: PB-01301-POD

ISBN: 978-1-57590-417-7

$30.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

The SSPC Pocket Guide to Coating Information is a handy reference to those charts, standards, and calculations most frequently needed during surface preparation and coating application.

Chapters consist of topics such as soluble salts, concrete coating, inspection, corrosion basics, and more.

2021 AMPP, 213 pages, 4 x 6" trim size, softbound.

Available for download

SSPC Pocket Guide to Coating Information

Product Number: PB-01301-pdf

ISBN: 978-1-57590-466-5

Author: SSPC

$30.00

The SSPC Pocket Guide to Coating Information is a handy reference to those charts, standards, and calculations most frequently needed during surface preparation and coating application.

Chapters consist of topics such as soluble salts, concrete coating, inspection, corrosion basics, and more.

SSPC VIS 3

Product Number: PB-00407

Publication Date: 2001

$210.00

This guide describes the use of reference photographs depicting the appearance of unpainted, painted, rusteed, and welded hot-rolled carbon steel prior to and after power- and hand-tool cleaning.

Each color photograph provides one possible illustration of the minimum acceptable level of cleanliness.

The photographs are intended to be used to supplement the written SSPC power- and hand-tool surface preparation standards.

This guide is in three languages: English, Spanish, and Portuguese.

SSPC VIS 4

Product Number: PB-00105

Publication Date: 2005

$210.00

This guide describes the use of reference photographs depicting the appearance of unpainted rusted carbon steel and painted carbon steel, with or without rust, prior to and after cleaining by waterjetting.

This guide, which consists of actual-size color photographs, can be used to clarifty the acceptable level of flash rusting allowed prior to the application of protective coatings.

Available for download

SSPC-SP 10 (WAB)/NACE No. 2 (WAB)-2015, “Near-White Metal Wet Abrasive Blast Cleaning”

Product Number: 21197-SG

Publication Date: 2015

$109.00

This standard, SSPC-SP 10 (WAB)/NACE WAB-2, defines the "Near-White Metal" level of surface cleanliness for wet abrasive methods. Other levels in overview below.

Available for download

SSPC-SP 10 /NACE No. 2-2006, Near-White Metal Blast Cleaning

Product Number: 21066-SG

Publication Date: 2006

$179.00

HISTORICAL DOCUMENT. Requirements for "Near-White Metal" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

Product Number: SSPC-SP 10/NACE No. 2-2024

Publication Date: 2024

$109.00

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a) to remove material from the surface that can cause early failure of the coating, and

b) to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

Degree of Surface Cleanliness	Designation
White Metal Blast Cleaning	SSPC-SP5/NACE No. 1
Near-White Metal Blast Cleaning	SSPC-SP10/NACE No. 2
Commercial Blast Cleaning	SSPC-SP6/NACE No. 3
Industrial Blast Cleaning	SSPC-SP14/NACE No. 8
Brush-Off Blast Cleaning	SSPC-SP7/NACE No. 4
Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance	SSPC-SP18

Available for download

SSPC-SP COM-2017, SSPC Surface Preparation Commentary for Metal Substrates

Product Number: SSPC-SP COM-2017

Publication Date: 2017

$109.00

This Surface Preparation Commentary (SP COM) is intended to be an aid for the coating specifier in selecting methods, materials, and standards for specifying the proper surface preparation for steel, and other metals (not including ductile iron pipe). The use of these standards in a coating specification will give direction to the contractor regarding what is required and give direction to the inspector on verifying compliance to the specification.

Available for download

Standards and Best Practice for Surface Preparation and Coating Application of Concrete

Product Number: PB-C0M01-pdf

ISBN: 978-1-57590-472-6

Author: Edited by Jean Broge

$190.00

Concrete surface preparation differs from surface preparation of steel, mostly due to the inherent properties of concrete.

Concrete is a non-uniform mixture of porous, permeable materials (cement, sand, stone, additives, water) with low tensile strength and often numerous cracks and defects. It will vary in properties, including moisture content, from site to site and within any site due to the batched nature of its production and installation.

Ranging from the basics of corrosion in reinforced concrete to using forensic science to determine concrete coatings failure, in this Standards and Best Practice for Surface Preparation and Coating Application of Concrete reference book, students and technicians learn problem solving via multiple case studies and technical artiles.

Standards and Best Practice for Surface Preparation and Coating Application of Concrete

Product Number: PB-C0M01-POD

ISBN: 978-1-57590-423-8

$190.00

Concrete surface preparation differs from surface preparation of steel, mostly due to the inherent properties of concrete.

Concrete is a non-uniform mixture of porous, permeable materials (cement, sand, stone, additives, water) with low tensile strength and often numerous cracks and defects. It will vary in properties, including moisture content, from site to site and within any site due to the batched nature of its production and installation.

Ranging from the basics of corrosion in reinforced concrete to using forensic science to determine concrete coatings failure, in this Standards and Best Practice for Surface Preparation and Coating Application of Concrete reference book, students and technicians learn problem solving via multiple case studies and technical artiles.

2022 AMPP, black and white, soft cover, 358 pages.

Available for download

Standards and Best Practice for Surface Preparation of Steel Substrates

Product Number: PB-C0M05-pdf

ISBN: 978-1-57590-441-2

Author: Edited by Jean Broge

$185.00

The life of a coating depends as much on the degree and quality of surface preparation as on the selected coating system, because most coating failures can be attributed to inadequate surface preparation or lack of coating adhesion.

In this Standards and Best Practice for Surface Preparation of Steel Substrates reference book, students and technicians are provided with the basics of numerous surface preparation techniques, pertinent technical standards, and numerous case studies on how to apply the techniques and adhere to the standards.

Available for download

The Importance Of Surface Preparation Method On The Corrosion Resistance And Mechanical Properties Of Zinc Rich Primers

Product Number: 51321-16642-SG

Author: Dr David Morton/ Antoni Prieto/ Tomas Alhambra/ Raquel Morales/ Cristina Juni

Publication Date: 2021

$20.00

Products tagged with 'surface preparation'

Association for Materials Protection and Performance