AMPP Store - Products tagged with 'vapor corrosion inhibitor (vci)'

Available for download

Case Studies On Vapor Corrosion Inhibitor Monitoring Using Electrical Resistance Probes For Oil And Gas Assets.

Product Number: 51322-17855-SG

Author: Daniel Mugongo, Juan Dominguez Olivo

Publication Date: 2022

$20.00

Aboveground storage tanks (ASTs) are assets that contain valuable goods for the oil and gas industry. Consequently, monitoring and preventing loss of containment and extending the service life of those assets is a priority for the abovementioned industries. To monitor the degradation process of the tanks, ER probes are typically used to determine the corrosion rates. Corrosion rates can be used to forecast the service life of an asset by estimating the time at which the degradation reaches a critical thickness of the tank. If the corrosion rate is such that the critical thickness is expected to reach below the expected service life of the asset, the lifespan can be extended by corrosion mitigation methods.

Available for download

Corrosion Management Learnings For Atmospheric Storage Tanks

Product Number: 51322-17951-SG

Author: Gulnur Badalova, Mikael Johansson

Publication Date: 2022

$20.00

The terminal is subdivided for Oil, Gas and Produced Water plants. Each of these plants has number of storage tanks. The age of the tanks varies between 15-25 years. The products held within these tanks varies, from crude oil, condensate, produced water, potable water, to off spec oil and diesel fuel.

Most of the tanks within the facility have a similar CP arrangement and design. Each tank base is protected by an impressed current grid mesh anode buried in compacted, clean, sand backfill beneath the tank base and is powered by a transformer-rectifier placed outside the bund wall or within an electrical switch room. Permanent reference electrodes are installed beneath all tank bases to enable accurate potential measurements. Reference electrodes vary from Copper/Copper Sulphate, Silver/Silver Chloride to Zinc.

Available for download

SP0487-2019, Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection

Product Number: 21037-2019

ISBN: 1-57590-097-1

Publication Date: 2019

$109.00

Provides guidance and best practices to users of interim, or temporary, coatings for corrosion protection of metals, including performance criteria, selection, surface preparation and application, evaluation of coatings, and other usage requirements. Quality control criteria are listed to enable the manufacturer and user to select appropriate test procedures to maintain prescribed standards. The standard is intended to assist the new buyer or user as well as the experienced user of interim coatings in the proper selection and evaluation of these coatings.

Available for download

Temporary Coating for In Process or Storage Applications

Product Number: 51218-092-SG

Author: Markus Bieber

Publication Date: 2017

$20.00

There is a tremendous need for the protection of assets during processing, shipment and storage. Critical spares must be readily available and easy to place into service with minimal impact to the operation of equipment. The proven technology of VCIs (Vapor Corrosion Inhibitors) has long been used to preserve many of these assets using traditional mechanisms such as papers and films.

Products tagged with 'vapor corrosion inhibitor (vci)'

Case Studies On Vapor Corrosion Inhibitor Monitoring Using Electrical Resistance Probes For Oil And Gas Assets.

Corrosion Management Learnings For Atmospheric Storage Tanks

SP0487-2019, Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection

Temporary Coating for In Process or Storage Applications

Association for Materials Protection and Performance