Menu
Search
Filters
Close
Menu

Case Studies On Vapor Corrosion Inhibitor Monitoring Using Electrical Resistance Probes For Oil And Gas Assets.

Picture for Case Studies On Vapor Corrosion Inhibitor Monitoring Using Electrical Resistance Probes For Oil And Gas Assets.
Available for download

Aboveground storage tanks (ASTs) are assets that contain valuable goods for the oil and gas industry. Consequently, monitoring and preventing loss of containment and extending the service life of those assets is a priority for the abovementioned industries. To monitor the degradation process of the tanks, ER probes are typically used to determine the corrosion rates. Corrosion rates can be used to forecast the service life of an asset by estimating the time at which the degradation reaches a critical thickness of the tank. If the corrosion rate is such that the critical thickness is expected to reach below the expected service life of the asset, the lifespan can be extended by corrosion mitigation methods.

Product Number: 51322-17855-SG
Author: Daniel Mugongo, Juan Dominguez Olivo
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings and Linings , Coatings
$0.00
$20.00
$20.00

Electrical Resistance (ER) probes are used as the central corrosion rate monitoring process to evaluate the effectiveness of Vapor Corrosion Inhibitors (VCI). The dependability of ER probes has become one of the major resourceful instruments being used to periodically examine corrosion rates underneath Aboveground Storage Tanks (AST). There are many approaches to detect corrosion levels underneath such tanks. One that is reliable and trackable is using a data logger to take readings on ER probes continuously and analyzing the data using a graphical method that thoroughly shows a linearized comparison of metal loss over time. The analytical range of check values is important during the analysis process with regards to making sure the reference points are standardized and within a good variant. A linear trend is used to quantify the corrosion rate and performance of VCI over time. The decision to either inject or reinject VCI are usually made in conjunction with analyzed data from the moving point average method that shows a proportional reduction in metal loss and inhibitor efficiency beneath the tank. Case studies on VCI monitoring in different geographical regions are outlined in this paper.

Electrical Resistance (ER) probes are used as the central corrosion rate monitoring process to evaluate the effectiveness of Vapor Corrosion Inhibitors (VCI). The dependability of ER probes has become one of the major resourceful instruments being used to periodically examine corrosion rates underneath Aboveground Storage Tanks (AST). There are many approaches to detect corrosion levels underneath such tanks. One that is reliable and trackable is using a data logger to take readings on ER probes continuously and analyzing the data using a graphical method that thoroughly shows a linearized comparison of metal loss over time. The analytical range of check values is important during the analysis process with regards to making sure the reference points are standardized and within a good variant. A linear trend is used to quantify the corrosion rate and performance of VCI over time. The decision to either inject or reinject VCI are usually made in conjunction with analyzed data from the moving point average method that shows a proportional reduction in metal loss and inhibitor efficiency beneath the tank. Case studies on VCI monitoring in different geographical regions are outlined in this paper.

Product tags
Also Purchased
Picture for Case Analysis Of Electromagnetic Interference Of AC Substation On Pipeline
Available for download

Case Analysis Of Electromagnetic Interference Of AC Substation On Pipeline

Product Number: 51322-17517-SG
Author: Su Jin
Publication Date: 2022
$20.00

A substation is a place where the power system converts voltage and current and receives and distributes electric energy. When a phase line is abnormally connected to another phase line or ground, a large amount of current will flow into the ground through the grounding bed of the substation. In such case, if metal structures exist such as buried pipelines near the substation, the pipelines often withstand serious electrical interference 1, which causes stray current corrosion of the pipelines 2 and other safety problems.
Picture for Carbonate And Sulfide Scale Formation In Multiphase Conditions
Available for download

Carbonate And Sulfide Scale Formation In Multiphase Conditions

Product Number: 51322-17894-SG
Author: Olujide Sanni, Thibaut Charpentier, Anne Neville
Publication Date: 2022
$20.00

Inorganic fouling in oilfields has resulted in millions of dollars of operating expenditure every year since the inception of offshore oil and gas drilling, where mineral scale deposition in tubing, flowlines and downhole equipment leads to significant production downtime. Calcium carbonate (CaCO3) fouling is endemic in oilfield systems, as produced water containing both bicarbonate and calcium ions is prone to form precipitates as a result of pressure changes during production.The release of carbon dioxide gas from the aqueous phase prompts the evolution of carbonate resulting in a rise in pH and consequent precipitation.
Picture for 02288 EVALUATION OF INHIBITOR PERFORMANCE...
Available for download

02288 EVALUATION OF INHIBITOR PERFORMANCE FOR PROTECTION AGAINST LOCALIZED CORROSION

Product Number: 51300-02288-SG
ISBN: 02288 2002 CP
Author: J. Marsh, J. W. Palmer and R. C. Newman
Publication Date: 2002
$20.00

 A novel evaluation technique, based on an artificial pit electrode, has been developed for inhibitor studies. The first example is of three generic inhibitors, against localised corrosion. The second is of three industrial inhibitors against existing localised corrosion on a north sea production platform
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support