AMPP Store - Products tagged with 'nickel-based alloys'

Available for download

51316-7237-Corrosion Assessment of Nickel-based Alloy Candidates for SCWR Fuel Cladding

Product Number: 51316-7237-SG

ISBN: 7237 2016 CP

Author: Yimin Zeng

Publication Date: 2016

$20.00

Supercritical water-cooled reactor (SCWR) is an innovative Generation IV nuclear reactor. Nickel-based alloys, such as UNS N06625, UNS R20033 and UNS N07214 alloys, are selected for the fuel cladding. Knowledge gaps exist as regards their use for the fuel cladding in the SCWR. This paper introduces laboratory results on corrosion and stress corrosion cracking (SCC) of the nickel-based alloys.

Available for download

Corrosion Of Constructional Alloys in Corrodants-Containing Catalytic Hydrothermal Liquefaction Biorefining Conditions

Product Number: 51323-18940-SG

Author: Minkang Liu, Yimin Zeng

Publication Date: 2023

$20.00

In recent decades, the increasing demand of conventional fossil fuel-derived energy and products leads to excessive greenhouse gas emissions. The intensifying environmental awareness and lack of supply in fossil fuel resources has expedited research for finding sustainable, energy secured and environmental-friendly alternatives. Among all the sources, biomass such as wood chips, agricultural crops and wastes, municipal and animal wastes, and specially engineered aquatic plants are commonly considered as potential sources to replace fossil fuels or chemical feedstocks.

Available for download

Corrosion Studies of Nickel-Based Alloys in Chloride Salts for Molten Salt Reactors

Product Number: 51323-19567-SG

Author: Kentaro Lunn, Nicholas Ury, Karla Sanchez, Harjot Singh, Kristopher Erlitz, Logan Gallegos, An Nguyen and Juan Nava, Vijay K. Vasudevan, Boateng Donkor, Sonali Ravikumar, G. Muralidharan, Jie Song, Steven Zinkle, Vilupanur Ravi

Publication Date: 2023

$20.00

Molten chloride salts are one of the leading candidates for heat transfer fluids and thermal energy storage for generation IV Molten Salt Reactors (MSRs). These chloride salts demonstrate many favorable properties such as low melting temperatures, high boiling points, high heat capacity, and low vapor pressure at higher temperatures. Ternary chlorides such as NaCl-KCl-MgCl2 used in this study are particularly attractive due to their lower melting points and high decomposition temperatures.

Available for download

Effect of Critical Alloying Elements and Impact of Various Corrodants on Steels and Alloys in Catalytic Hydrothermal Liquefaction Biorefining Conditions

Product Number: 51324-21224-SG

Author: Minkang Liu; Yimin Zeng

Publication Date: 2024

$40.00

Hydrothermal liquefaction represents a promising thermochemical technology for the conversion of wet biomass and biowaste streams into bioenergy products. However, the realization of its full potential is impeded by significant knowledge gaps related to corrosion damage experienced by reactors in the conversion environment. In this study, we investigated the influence of alloying elements on corrosion processes through a combination of thermodynamic calculations and autoclave tests. The impact of various amount of corrodants were also assessed. Our findings indicate that chromium plays a dominant role in corrosion resistance in both Fe-based steels and nickel-based alloys. Additionally, the corrosion resistance of a specific nickel-based alloy, UNS N08825, also depends on the existence of corrodants and amount of chromium present, leading to varying performance in different HTL conversion environments.

Available for download

Environmentally Assisted Cracking Of Nickel Based Alloy 955 In Saltwater With Cathodic Protection For HPHT Application

Product Number: 51322-17768-SG

Author: Arshad B Gavanluei, Vipul Shinde, Manuel Marya, Ramgopal Thodla, Alexis Simon, Stanley Gregory

Publication Date: 2022

$20.00

Precipitation hardened (PH) Ni-based alloys have been utilized in oil and gas industry for decades. Among them, UNS1 N07718 because of its performance in sour wellbore fluids and in hydrogen charging environments has received the most attention for multiple upstream applications such as tubing hangers, production stab, multi-phase flow meter bodies, valve stems, etc. It has been reported that the alloy performance is generally acceptable for many applications up to 175 °C (350 °F) – 204 °C (400 °F) in the exposed wellbore environments such as sour production fluid, completion brine, and depending on metallurgical processing and microstructure externally exposed to SWCP at the seabed temperature.

Available for download

Environmentally Assisted Cracking Susceptibility Of Nickel Based Alloy 955 In A Sour Wellbore Fluid For HPHT Application

Product Number: 51322-17766-SG

Author: Arshad B. Gavanluei, Ramgopal Thodla, Manuel Marya, Alexis Simon, Vipul Shinde, Stanley Gregory

Publication Date: 2022

$20.00

Precipitation-hardened nickel-based alloys have been used for decades in the oil and gas industry. Among these alloys, UNS1 N07718 has received the most attention for use in upstream applications such as tubing hangers, production stab plate, multiphase flowmeter bodies, and valve stems because of its performance in sour wellbore fluids (SWFs) and hydrogen-charging environments.

Available for download

Evaluation Of Hydrogen Embrittlement Of Nickel-Based Alloys In Cesium Formate With H2S/CO2

Product Number: 51322-18024-SG

Author: Xiaoji Li, Ramgopal Thodla

Publication Date: 2022

$20.00

Cesium formate (CsFo) brines have been used as the drilling and/or completion fluids in oil and gas wells in need of high-density fluids.^1,2 Multiple studies on corrosion of steels and corrosion resistance alloys (CRA) in formate environments have been reported in the literature.^2-8 It was known that the formate brines could undergo significant decomposition to form hydrogen when in contact with catalytic surfaces which CRA can act as. Therefore, there have been concerns that the CRA may catalyze the decomposition of formate brines to accelerate the generation of hydrogen which in turn may embrittle certain CRAs and endanger the relevant well equipment.

Available for download

Failure Analysis of a 4-Inch 25Cr-35Ni Welded Fitting

Product Number: 51323-19079-SG

Author: Sudhakar Mahajanam, Chris Miller, Scott Harding

Publication Date: 2023

$20.00

Up until the 1940s, typical furnace tube materials consisted of wrought chromium steels and austenitic stainless steels. But the low carbon content led to increased creep.

Available for download

RP0292-HD1992-SG Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment-HD1992

Product Number: 21054-HD1992

ISBN: 1-57590-066-1

Publication Date: 1992

$179.00

Technical and quality assurance guidelines for handling and installing nickel-base alloy, stainless steel, and titanium linings in air pollution control equipment (e.g., FGD systems, ducts, and stacks). Historical Document 1992

Available for download

RP0292-HD1998-SG Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment-HD1998

Product Number: 21054-HD1998

ISBN: 1-57590-066-1

Publication Date: 1998

$179.00

Technical and quality assurance guidelines for handling and installing nickel-base alloy, stainless steel, and titanium linings in air pollution control equipment (e.g., FGD systems, ducts, and stacks). Historical Document

Products tagged with 'nickel-based alloys'

Association for Materials Protection and Performance