AMPP Store - Products tagged with 'mineral scale'

Available for download

51317-9658-Evaluation of Anti-fouling Surfaces for Prevention of Lead Sulfide Scaling in Single and Multiphase Conditions

Product Number: 51317-9658-SG

Author: William Keogh / Thibaut Charpentier Anne Neville /, Andrew O’Brien / Violette Eroini / John Helge Olsen / Frank Møller Nielsen

Publication Date: 2017

$20.00

Soured reservoirs contain hydrogen sulfide (H2S) that can prompt the formation of exotic sulfide scales, leading to fouling that negatively affects the production of oil and gas. The paper examines the mode of precipitation and deposition of lead sulfide (PbS) scale on anti-fouling surfaces for application in oilfield systems.

Available for download

51318-10972-Inorganic Lead Sulfide (PbS) Scale Behaviour and Deposition as a Function of pH in Multiphase

Product Number: 51318-10972-SG

Author: William Keogh / Gifty Oppong Boakye / Anne Neville / Thibaut Charpentier / John Helge Olsen / Violette Eroini / Frank Møller Nielsen / Jon Ellingsen / Oeystein Bache / Salima Baraka-Lokmane / Etienne Bourdelet

Publication Date: 2018

$20.00

Laboratory apparatus enabled simulation of scale precipitation under turbulent emulsion-forming multiphase conditions, with behavior of PbS particles at the oil/water interface and subsequent adhesion onto anti-fouling surfaces measured at a range of polymer concentrations

Available for download

CorrCompilation: Advancements for Control of Inorganic Scale, Volume 3 (e-book)

Product Number: 37650-e

ISBN: 978-1-57590-393-4

Author: edited by Wayne W. Frenier, FNACE

$125.00

This CorrCompilation series focuses primarily on equilibrium-formed scales, where an aqueous fluid changes from an unsaturated equilibrium state to a saturated and supersaturated state and then solids may start to form. These types of fouling minerals include alkaline earth salts, silicates, alkaline salts (NaCl), sulfides, and under specific circumstances, metal sulfide salts that form through equilibrium changes. While corrosion product scales are not the subject of this book, the importance of corrosion product layers to the deposition of other scales will be described.

Since this is a CorrCompilation and more than 90 copies of NACE papers are included, the work is published in four volumes. The editor, Wayne W. Frenier, FNACE, provides an extensive introduction to each volume, offering the reader a thorough mix of history, theory, and engineering techniques and methods for addressing scale.

Volume 1: Introduction to Equipment Subject to Inorganic Scale

Volume 2: Current Mechanisms for Understanding Inorganic Scale Formation and Deposition

Volume 3: Chemistry and Application of Scale Inhibitors

Volume 4: Alternative Methods of Scale Control

This volume, “Chemistry and Application of Scale Inhibitors,” will describe current scale inhibitor (SI) chemicals and theories of their modes of action. These chemicals are used to inhibit (reduce) the detrimental effects of mineral scales on oil and gas as well as other industrial surfaces.

Available for download

Development Of A Tool To Track The Fraction Of Injected Water In Produced Water Streams

Product Number: 51323-19130-SG

Author: Thibaut V. J. Charpentier, Rose Lehman, Andre Leontieff

Publication Date: 2023

$20.00

Waterflooding is a common secondary recovery technique where injection water (IW) is used to maintain reservoir pressure and improve oil recovery. During such operations, the mobile hydrocarbon phase is displaced along with formation water (FW) toward producing wells. The resulting produced water stream is a blend of FW and IW; these waters can be incompatible resulting in dissolved ions to precipitate out of solution as mineral scale.

Available for download

Iron Carbonate (Feco3) SLIPS (Slippery Liquid Infused Porous Surfaces) For Enhanced Scale Resistance

Product Number: 51321-16645-SG

Author: Alexander Saul; Anne Neville; Salima Baraka-Lokmane; Aurelie Le Beulze; Thiabaut Charpentier; Suparit Tangparitkul; John-Richard Ordonez-Varela

Publication Date: 2021

$20.00

Available for download

Retention Improvement Of Sulfonic Acid Based Scale Inhibitor On Sandstone Formations At HTHP Conditions

Product Number: 51322-17875-SG

Author: Yasmin Hayatgheib, Salima Baraka-Lokmane, Thibaut Charpentier, Wassim Taleb, Paul Thornton, John-Richard Ordonez-Varela, Richard Barker, Wassim Taleb, Anne Neville

Publication Date: 2022

$20.00

Oilfield waters have a complex composition depending on reservoir rock at different geographical locations that can be carried into the production water¹. The alteration in environmental conditions such as pressure, temperature, salt content or pH can cause the liquid to oversaturate and the contained ions to form complexes. These will precipitate out of the solution, deposit and grow on contacting surfaces such as reservoirs, upstream production tubing, sub-surface safety valves, water injection lines to top side refining equipment namely heat exchangers and transport lines ^2–4. Scaling can also be induced by incompatible mixing of fluids. For example CaCO₃ and /or BaSO₄ form through typical mixing of SO4 2- containing sea water with the formation water that carries high concentrations of divalent cations such as Ca²⁺and Ba^2+₂. Similarly, sulfide scales form upon mixing with H₂S-containing formation water enriched with Fe, Zn or Pb ions ⁵. ZnS and PbS have been observed to form in presence of only 25 ppm H₂S at gulf of Mexico containing 50 ppm Zn and 5 ppm Pb , due to their low solubility constant K_sp ^6,7.

Products tagged with 'mineral scale'

51317-9658-Evaluation of Anti-fouling Surfaces for Prevention of Lead Sulfide Scaling in Single and Multiphase Conditions

51318-10972-Inorganic Lead Sulfide (PbS) Scale Behaviour and Deposition as a Function of pH in Multiphase

CorrCompilation: Advancements for Control of Inorganic Scale, Volume 3 (e-book)

Development Of A Tool To Track The Fraction Of Injected Water In Produced Water Streams

Iron Carbonate (Feco3) SLIPS (Slippery Liquid Infused Porous Surfaces) For Enhanced Scale Resistance

Retention Improvement Of Sulfonic Acid Based Scale Inhibitor On Sandstone Formations At HTHP Conditions

Association for Materials Protection and Performance