AMPP Store - Products tagged with 'coatings'

Available for download

Triangle of Trust Client Driven Specifications for Wastewater Facilities

Product Number: 41214-874-SG

Author: Joe Cesarek, Dan Zienty

Publication Date: 2014

$20.00

Through the course of any project, communication is the key element for success. In the coatings industry, a lack of communication by project stakeholders can show up in a very short time following project completion. This can be in the form of premature failures, shorter equipment service life, etc. We have found that this gap in communication often exists on the planning and implementation side of wastewater treatment projects. As professionals we have a tendency to hear, but not listen.

Available for download

Troweled Cementitious Urethane Floor Systems

Product Number: 41205-180-SG

Author: Alex Lowery

Publication Date: 2005

$20.00

This paper will focus on polymeric cementitious urethane floor systems that are applied in very harsh and demanding environments. We will outline the history, advantages and disadvantages of these systems, as well as some of the applications for which these systems are best suited. Finally, we will discuss how these systems are applied.

Available for download

True Value of Quality: A Case History of a Success Story

Product Number: 41206-243-SG

Author: Benjamin S. Fultz

Publication Date: 2006

$20.00

A case study of how poor initial quality control resulted in a complete coatings rework of the underwater bottom (exterior hull) of a large Floating Storage Unit (FSU) and how a good quality control program, during rework, resulted in the documented long term performance of the second application underwater hull coating system.

Available for download

Tungsten Carbide High Velocity Thermal Spray Coatings in the Oil & Gas Industry

Product Number: 51216-006-SG

Author: Herman E. Amaya, Lee Schmerling

Publication Date: 2016

$20.00

This paper will explore several variables which affect the tungsten carbide coating material deposited by a high velocity thermal spray process (HVTS) on Oil & Gas components such as valve sealing components (gate, ball, seat) and on other equipment (pistons for example on BOP’s or Blow Out Preventers). The purpose of coating these components is to gain wear/abrasion resistance as well as to impart some corrosion resistance.

Available for download

Two-Coat Low VOC Maintenance System for DoD Aboveground Storage Tanks

Product Number: 41205-168-SG

Author: C. David Gaughen, Paul Anderson, Jason Bell

Publication Date: 2005

$20.00

To protect against corrosion, exterior Department of Defense (DoD) Aboveground Storage Tank (AST) surfaces initially receive a three-coat coating system consisting of epoxy primer (MIL-DTL-24441, Formula 159, Type III), epoxy intermediate (MIL-DTL-24441, Formula 152, Type IV), and polyurethane topcoat (MILPRF-85285D, Type II). Exterior AST maintenance painting is generally required at less than eight years’ service.

Available for download

Two-Coat Polyaspartic Urethane Coatings Protect Virginia Steel Bridges for Over a Decade

Product Number: 41216-994-SG

Author: Ahren Olson, Todd Williams, Mark Hudson, C. Wayne Fleming

Publication Date: 2016

$20.00

In 2003 Connecticut Department of Transportation (DOT) conducted a study to quantify the throughput and cost savings potential of a PAS two-coat system versus a three-coat system. The study showed that a PAS two-coat system had a 31% increase in productivity and direct cost savings of approximately $6 per square foot, with indirect cost savings of $18 per square foot when including the benefits of reduced traffic congestion.17 PAS two-coat systems utilize a zinc-rich primer for galvanic protection; the epoxy and polyurethane layers are replaced by a high-build PAS topcoat.

Available for download

Ultra High Pressure Waterjetting as a Means of Surface Preperation for Marine Coatings Systems

Product Number: 41206-218-SG

Author: David P. Allerton, Nicole S. Bokisa, Brian S. Skerry

Publication Date: 2006

$20.00

The objective of this study was to examine the effects of an ultra-high pressure (UHP) waterjetting surface preparation (>25,000 psi) on the performance properties of select marine/offshore coating epoxy systems. Uncoated steel panels had been allowed to rust in an outdoor atmospheric environment and then were subjected to UHP waterjetting

Available for download

Ultra Low VOC High Performance Waterborne Coatings

Product Number: 41206-276-SG

Author: Patricia M. Peterson

Publication Date: 2006

$20.00

The twenty-first century presents a major challenge to coatings manufacturers. The amount of solvent allowable in many coatings has been reduced considerably. In order to attain these lower VOC’s, coatings formulators are searching for resins that have low VOC demand, as well as ways of formulating that can replace the high volumes of solvent used in the past

Available for download

Ultra Tolerant Coating Technology: The 15 Years Path From Maintenance to New Construction

Product Number: 51317--9235-SG

ISBN: 9235 2017 CP

Author: Joao Salvado Azevedo

Publication Date: 2017

$20.00

Poor performance of materials…is why…more realistic application conditions are needed. An ultra-tolerant material, compatible with flash rust, humidity, poor profile and cold application conditions, potentially with Ultra High Pressure (UHP) water jetting, is presented in this paper.

Available for download

Ultra-Low VOC Waterborne Alkyd Coatings with Exceptional Corrosion Resistance

Product Number: 51216-018-SG

Author: Erin Vogel, Bob Bills, Marty Beebe, Christina Ellison, Jamie Sullivan, Vennesa Williams

Publication Date: 2016

$20.00

Solventborne alkyd resins are widely used in industrial coatings because of their excellent gloss, good adhesion and wetting properties as well as excellent compatibility with other resin types. In many regions, however, the consumption of alkyds is diminishing as stringent environmental regulations drive the coatings industry towards lower volatile organic compound (VOC) systems. Waterborne (WB) coating systems have replaced some solventborne (SB) alkyd paints; however, these WB coatings typically do not offer the same performance as their solventborne counterparts.

Available for download

Ultra-violet Curable Coatings from Highly-Functional Acrylated Biobased Resin

Product Number: 41212-697-SG

Author: Adlina Paramarta, Xiao Pan, Dean C. Webster

Publication Date: 2012

$20.00

The search for environmentally friendly and greener materials in the polymer field is further explored to decrease dependency toward petroleum-based products. Sucrose soyate, a complex molecule of sucrose and fatty acids of soybean oils, provide an alternative renewable material for petroleum-based coating resins in addition to the already existing choice of drying oils

Available for download

Understanding Adhesion Test Data - The Importanceof Round Robin Evaluations

Product Number: 41208-455-SG

Author: Lloyd Smith, J. Peter Ault

Publication Date: 2008

$20.00

Current ASTM standards require a statement of precision and bias as part of the standard test method. This statement allows a user to properly interpret results obtained by a competent operator. Development of these statements typically involves an interlaboratory study, commonly referred to as a round-robin test.

Products tagged with 'coatings'

Association for Materials Protection and Performance