AMPP Store - Products tagged with 'coatings'

Available for download

Is Your Waterborne 2K Epoxy Formulation Giving You a Headache? Here is the Cure!

Product Number: 41214-854-SG

Author: Michaela Zirngast, Gerald Hobisch, Florian Lunzer

Publication Date: 2014

$20.00

A new system for waterborne 2K epoxies has been developed that presents a measurable value proposition. Performance testing results are presented that demonstrate the key features of coatings prepared with the new amine hardener and two different epoxy dispersions. The hardener is ultra-low-VOC and contains no free amines (no need for hazard labeling).

Available for download

Laboratory and Field Testing of Thin-Film Air Barrier Coatings When Applied to Concrete Masonry Units

Product Number: 41213-759-SG

Author: Kevin D Knight

Publication Date: 2013

$20.00

This paper will address the new requirements of the 2012 International Energy Conservation Code for the building envelope, which requires careful design to limit uncontrolled air leakage into and out of buildings.

Available for download

Laboratory And Full-Scale Qualification Of An Abrasion Resistant Overcoat Wrap

Product Number: 51322-17633-SG

Author: David B. Futch, Tré Bischof, David D’Ambrosio, Chris Alexander

Publication Date: 2022

$20.00

As onshore pipeline rights-of-way become more congested and urban sprawl increases, the number of horizontal directional drills (HDDs) will likely increase. HDD is a trenchless pipeline installation method that requires drilling a larger pilot hole where the mainline pipe can be subsequently pulled through the drilled hole. However, HDDs have an increased probability for coating damage, even when coated with traditional mill or field applied abrasion resistant overcoat (ARO). This coating damage includes abrasion, impact, gouging, denting, tearing, bending, etc. and that damage may exist for the life of the pipeline due to an HDD being inaccessible for future maintenance.

Available for download

Laboratory Evaluation of Metalized Coatings for Use on Reclamation Infrastructure

Product Number: 41213-788-SG

Author: David Tordonato, Allen Skaja

Publication Date: 2013

$20.00

Metalizing is not a new technology. It has been in use since the 1930s. Although it has seen limited use in comparison with conventional coatings, this is primarily due to economics. In past years, application rates for metalized coatings have been slow, making the process an expensive alternative to conventional coatings.

Available for download

Laboratory Testing To Investigate If Coated Pipelines Are Safe For Transportation Of Hydrogen Gas

Product Number: 51322-17832-SG

Author: Amal Al-Borno, Jeffrey Rogozinski, Jigar K. Mistry, Yuan Li, Moavin Islam

Publication Date: 2022

$20.00

Governments and energy companies are increasingly looking at hydrogen as an alternative to fossil fuels, and it is considered that without hydrogen the world cannot aim to be a net zero carbon economy by 2050. Consequently, hydrogen is currently enjoying unprecedented political and business momentum, with the number of policies and projects around the world expanding rapidly. Combustion of hydrogen does not produce greenhouse gases such as carbon dioxide and methane, particulates, sulfur oxides or ground level ozone. Thus, hydrogen offers ways to decarbonize a range of sectors, as well as help improve air quality and strengthen energy security.

Available for download

Latest Developments with Solvent-Free Epoxy Coatings

Product Number: 41205-213-SG

Author: Michael Winter

Publication Date: 2005

$20.00

Regulations limiting Volatile Organic Content (VOC) have led to increased interest in solvent-free epoxy coatings, but the use of these coatings can give significant performance advantages and not just environmental compliance.

Available for download

Lining Below Grade Concrete

Product Number: 51220-227-SG

Author: Matt Apsley

Publication Date: 2020

$20.00

What exactly is involved when designing and installing a liner for concrete structures below grade? Does the structure need to be damp proofed? What testing protocols should or shouldn't be specified and when should they be performed. What type of surface prep should be done and why is surface profile so important? What type of liner has the best performance properties for below grade concrete? Why liner curing time, thickness and resistance to moisture is important. These are several questions that should be answered when beginning to specify a lining project

Available for download

Liquid Applied Insulation Coatings: From the Lab to the Field

Product Number: 51217-029-SG

Author: Nicole Bowman, Remi Briand, Jeremy Ethington

Publication Date: 2017

$20.00

Waterborne coatings are safer to use than their traditional solvent borne counterparts and can reduce environmental impacts. As the market share for waterborne coatings has grown, there has been increased focus on their performance. Simultaneously, the building industry has been challenging coatings manufacturers to provide functional coatings. No longer are aesthetics, corrosion prevention and protection enough; a coating can and should provide multiple benefits to the user. One of the fastest growing segments of the functional waterborne coatings market is liquid applied insulation coatings.

Available for download

Liquid Metal Embrittlement in the Refining Industry – Case Histories and Common Prevention Practices

Product Number: 51323-18903-SG

Author: Cathleen Shargay, Shahab Soltaninia, Diana Basheva

Publication Date: 2023

$20.00

Liquid Metal Embrittlement (LME) phenomenon occurs when the certain molten metals wet the specific alloys, causing drastic ductility reduction that normally is associated with the formation of an intergranular crack that is sudden and brittle in nature. High tensile stress is also known to promote cracking; however, cracks may develop merely by contacting molten metal with a susceptible alloy as there is only a small amount of low-melting-point metal required to cause LME.

Available for download

Low Solar Absorbing Epoxy Marine Decking Systems

Product Number: 41215-941-SG

Author: Jing Zeng, David Robinson

Publication Date: 2015

$20.00

Low solar absorbing (LSA) attributes are important for marine decking materials. Reduced solar heat absorption can not only improve the condition of living and working spaces beneath any deck, but also help protecting electronics and equipment. This article will review current LSA technologies and present a study on how to improve the solar reflectance and weather resistance of epoxy marine decking.

Available for download

Maintaining Aged Infrastructure with Difficult-to-Coat Features

Product Number: 51217-073-SG

Author: Allen Skaja, Richard Pepin, David Tordonato, Bobbi Jo Merten,

Publication Date: 2017

$20.00

Maintaining aged infrastructure can be challenging, especially when structures were designed with difficult-to-coat features, such as riveted construction, back-to-back plates, or skip welds. According to NACE SP0178 - Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to be Lined for Immersion Service, these construction methods are not recommended for immersion service.

Available for download

Maintenance Painting of Galvanized Mast Arms A Project Performed Despite Budget Constraints

Product Number: 41212-668-SG

Author: Richard A. Burgess, Gregory R. Richards

Publication Date: 2012

$20.00

Premature failures of coatings applied to galvanized mast arms is not an unfamiliar problem. The properties of galvanizing that make it a difficult substrate to coat when new don’t simply disappear from beneath the original coating system.

Products tagged with 'coatings'

Association for Materials Protection and Performance