AMPP Store - Products tagged with 'coatings'

Available for download

Development of a Slurry Erosion Test standard of Industrial Maintenance Coatings

Product Number: 41215-936-SG

Author: David Tordonato, Bobbi Jo Merten, Allen Skaja

Publication Date: 2015

$20.00

Over the past several years, the Bureau of Reclamation’s Materials Engineering Research Laboratory has been developing and refining a test method to evaluate a coating’s resistance to erosion damage in sediment-laden immersion exposure. This test has initially been utilized as a screening/ranking method in selection of new coatings for the aforementioned severe service environments.

Available for download

Development Of Fes Scale Control Technology Using Polymeric Dispersants In Sour Environment

Product Number: 51322-17630-SG

Author: Saebom Ko, Zhaoyi Dai, Xin Wang, Amy T. Kan, Wei Lee, Mason B. Tomson

Publication Date: 2022

$20.00

Mineral scales frequently occur in tanks, pipelines, cooling and heating system, production wells of
oil and gas, external and internal membrane, and other equipment during industrial processes,
causing the reduction of process efficacy and millions of dollars on dealing with the scale issues. As
oil and gas are produced increasingly in more unconventional reservoirs, such as deeper and tighter
zones, with new technologies, more challenges are encountered to mitigate scale problems.

Available for download

Development of Linings for High Temperature, High Pressure Applications for Petrochemical Applications

Product Number: 41214-838-SG

Author: Ted Moore, Mark M. Morrison

Publication Date: 2014

$20.00

Development of linings for high temperature, high-pressure applications present a number of special challenges. Challenges include chemical resistance, abrasion resistance, adhesion under cycling temperature and pressure conditions, flexibility, application properties, as well as resistance to pressure and temperature.

Available for download

Development of Self-Stratifying Systems as Sustainable Coatings

Product Number: 41213-729-SG

Author: J. Baghdachi, H. Perez, Punthip Talapatcharoenkit

Publication Date: 2013

$20.00

Certain coating applications including those used in aerospace, industrial maintenance, construction and transportation industries require a combination of primer/topcoat or basecoat/clearcoat layers. These multilayered systems require complex application and curing procedures. Multiple formulation, application and processing steps not only contribute to environmental waste generation and pollution they also use an excessive amount of energy until a solid film has been produced

Available for download

Dimensional Profiling: Providing Sustainable Slip Resistance with a Known Approximate Static Co-Efficient of Sliding Friction Value

Product Number: 41214-846-SG

Author: Tim Post, Mike Houx, Steven Schroeder

Publication Date: 2014

$20.00

Dimensional Profiling is a new prospective of applying sustainable non-slip characteristics to the surface of polymeric flooring and coating systems. Over the last three decades, it has been commonplace in the industry to provide a single nonslip media profile.

Available for download

Double Your Business in the Next 12 Months

Product Number: 41214-811-SG

Author: Richard Bueckert

Publication Date: 2014

$20.00

That's a pretty audacious title, isn’t it? I’m going to show you how to take the best of the old methods, stir in some of the new media, and stand out as a coating professional. Distinctly different from the wanna-be’s and the willnever-be’s so the whole process of getting jobs becomes automatic and easy.

Available for download

Durability Assessment of Foul-release Coatings

Product Number: 41212-715-SG

Author: David Tordonato, Dr. Allen Skaja

Publication Date: 2012

$20.00

The Bureau of Reclamation (USBR) is currently investigating the feasibility of using foul-release coatings to mitigate impacts caused by macro-fouling organisms such as zebra and quagga mussels. Durability of these coatings must be considered as a factor in determining overall life cycle costs. To this end, the Bureau of Reclamation has developed testing protocols to evaluate the durability of foul-release coatings with respect to abrasion, erosion resistance and the ability to overcoat existing equipment.

Available for download

Ecologically Sound Coating Technology

Product Number: 41211-659-SG

Author: Paul Whitehead

Publication Date: 2011

$20.00

The fundamental purpose of protective coatings and linings has always been the protection of structures from the degradation due to environmental and service conditions. While that remains to be the case, coatings are increasingly evaluated on their environmental, health, and safety effects as well as the various operational efficiencies they offer.

Available for download

Effective Relationships Between Applicators, Inspectors, Owners and coating Manufacturer Representatives

Product Number: 41205-192-SG

Author: Jonathan Palo

Publication Date: 2005

$20.00

Successful relationships are dependent upon effective communication between all the parties involved in an industrial maintenance painting project. Owner expectations can only be met when the parties involved work together to meet basic project requirements.

Available for download

Effective Shop and Field Solutions for Compliance to OSHA 1926.754

Product Number: 41206-228-SG

Author: Laura Costello

Publication Date: 2006

$20.00

For almost two decades, organizations supporting the ironworker’s industry have sought constructive solutions to improve the footing for ironworkers during erection of structural steel. This issue, specifically as it relates to the coatings industry, is the loss of traction between the ironworker’s footwear and the coated steel beam, and the potential for the worker of falling to their death as a result of slipping on wet or damp coated steel beam surfaces.

Available for download

Effectiveness of Epoxy and Moisture-Cure Polyurethane Coatings in Corrosion Mitigation of Embedded Rebar- an Experimental Study

Product Number: 51320-14405-SG

Author: Raghava Kumar Vanama, Balaji Ramakrishnan

Publication Date: 2020

$20.00

Chloride induced corrosion is the prime reason for the degradation of embedded rebar in reinforced concrete marine structures. The present study experimentally investigates the effectiveness of traditional two-component epoxy (EPX), and moisture-cure polyurethane coatings (MC) applied on the concrete surface in reducing the rate of chloride ingression compared to the conventional concrete with and without mineral admixtures like fly ash and GGBS. Coatings used in the present study are characterized by XRD, EDAX, FEG-SEM, water uptake, adhesion strength and contact angle tests. Rapid chloride migration tests (RCMT) were conducted on concrete with and without coatings. Resistivity offered against the chloride migration monitored during the RCMT test indicated that concrete with MC shown higher resistivity in the initial period and continued to decrease over the test duration at a faster rate, unlike EPX. The non-steady-state migration coefficients of the concrete cured for 28days and coated with MC and EPX coatings were found to be nearly 22% and 48% of that of concrete with SCM cured for 84days respectively. The study is further extended to monitor the corrosion of rebar embedded in coated concrete subjected to corrosion acceleration until the first crack appeared on an uncoated specimen. Variation in current flow, half-cell potentials recorded during the acceleration test and actual mass loss of embedded rebar estimated by gravimetric analysis are presented in this paper.

Available for download

Elastomeric Coatings: A Qualitative Failure Analysis

Product Number: 51219-171-SG

Author: N. Alrafie, R.E.Moon, M.Bass

Publication Date: 2018

$20.00

For decades, waterproofing has been a major concern and a widely researched topic by building scientists and forensic engineers. Elastomeric coatings have been broadly used in different applications since the early 1950s. Manufacturer’s recommendations for the proper application of elastomeric coatings are often based on laboratory conditions (75oF and 50% RH) rather than extreme conditions posed by the real world. This study examines the failure of elastomeric roof coating exposed to conditions of high temperature (150°F) and water pooling caused by precipitation.

Products tagged with 'coatings'

Association for Materials Protection and Performance