AMPP Store - Products tagged with 'oil sands'

Available for download

3D Printing Of Cemented Carbide: A Review And Perspectives In Oil Sands

Product Number: 51322-17506-SG

Author: Young Li, Duane Serate, Stefano Chiovelli, Simon Yuen, Darius Remesat, Brian Doucette, Billy Rideout, Dave Waldbillig, Marcus Ive

Publication Date: 2022

$20.00

Canada's oil sands are the third largest deposit of crude oil in the world, and consist of a mixture of sand, water, and bitumen. Due to an aggressive operating environment that includes abrasive sands and corrosive chemicals, oil sands equipment and process piping often experience severe wear and erosion-corrosion, which can lead to the risk of equipment failures, plant downtime or, even worse, environmental leaks [1]. For more than half a century, oil sands producers have collaborated with materials suppliers, equipment fabricators, and technology providers to develop wear technologies to reduce downtime and improve operational reliability.

Available for download

51316-7036-Abrasion-Corrosion Resistance of Stainless and Wear Resistant Steels for Oil Sands Applications

Product Number: 51316-7036-SG

ISBN: 7036 2016 CP

Author: Sandra Le Manchet

Publication Date: 2016

$20.00

Oil sands operations may give rise to various corrosion risks such as pitting corrosion crevice corrosion microbiologically induced corrosion and abrasion-corrosion. This paper focuses on the abrasion-corrosion resistance of various stainless steels and wear resistant carbon steels.

Available for download

51316-7184-Corrosivity of Produced and Make-up Water in Oil Sands Thermal Water Treatment Systems

Product Number: 51316-7184-SG

ISBN: 7184 2016 CP

Author: Tesfaalem Gebremedhin Haile

Publication Date: 2016

$20.00

The current paper presents a study on corrosivity of produced water and make-up water on UNS G10180 carbon steel in simulated in-situ thermal operations.

Available for download

51316-7298-Application of Non-Metallic Materials in Oil Sands Operations

Product Number: 51316-7298-SG

ISBN: 7298 2016 CP

Author: John Wolodko

Publication Date: 2016

$20.00

Oil sands production has unique challenges in terms of materials selection and long-term performance. This paper provides a general overview of various oil sands recovery and upgrading processes, and outlines areas where polymers and composites could be effectively utilized. Case studies.

Available for download

51317--9637-Non-Metallic Liners for Dense Slurry (Oil Sands) Applications

Product Number: 51317--9637-SG

ISBN: 9637 2017 CP

Author: Duane Serate

Publication Date: 2017

$20.00

This paper summarizes the experimental findings, discusses the effects of a typical bitumen-water slurry solution on the wear performance of polyurethanes and neoprenes and proposes a mathematical relationship between Coriolis (low stress, low angle abrasion & scouring) wear to the relevant physical properties in the virgin state of polyurethanes and neoprenes.

Available for download

51317--9720-Remote Monitoring of the Mechanical Integrity of Oil Sands Facility High Wear Components

Product Number: 51317--9720-SG

ISBN: 9720 2017 CP

Author: Rob Leary

Publication Date: 2017

$20.00

This paper discusses the implementation of an on-line remote ultrasonic (UT) system at a SAGD (Steam Assisted Gravity Drainage) facility located within the Athabasca oil sands reserves in Northern Alberta.

Available for download

51318-10490-Elucidating the Corrosion Phenomena in a Thermal In-Situ Oil Sands Emulsion Pipeline

Product Number: 51318-10490-SG

Author: Ayodele O. Okunola / Randy Damant / John A. Lerbscher

Publication Date: 2018

$20.00

Two case histories at a thermal in-situ oil sands project elaborate on field parameters by studying the various corrosion phenomena at play. Mitigation recommendations are also be presented.

Available for download

51318-10637-Wear Modelling of Dense Slurry Flow in Oil Sands Coarse Tailings (CT) Pipelines

Product Number: 51318-10637-SG

Author: Guoqiang Yang / Kuochen Tsai / Duane Serate / Mingqi Wu

$20.00

The objective of this study is to develop predictive wear model for dense slurry flow to narrow the gap left by extrapolation from models meant for more dilute sand conditions.

Available for download

51318-11290-Evaluating Polymer Based Materials Pipeline for Large Solids Particles Applications

Product Number: 51318-11290-SG

Author: Kofi Freeman Adane / Aaron Fuhr / Ben Fotty

Publication Date: 2018

$20.00

Assessment was performed on the use of polymer-based materials or liners for large solids particle slurry applications. The study was conducted in a pilot-scale horizontal slurry flow loop using two different solids: sand and rocks.

Available for download

51318-11291-Oil Sands Bitumen Effect on Corrosion

Product Number: 51318-11291-SG

Author: Kofi Freeman Adane

Publication Date: 2018

$20.00

Corrosion susceptibility of commonly used oil sands slurry pipeline materials was evaluated with and without bitumen coating on their surface.

Available for download

Assessing the Corrosivity of Field Produced Water in in-situ Oil Sands Water Treatment Systems

Product Number: 51317--9389-SG

ISBN: 9389 2017 CP

Author: Tesfaalem Gebremedhin Haile

Publication Date: 2017

$20.00

A study on the corrosivity of field produced water obtained from in-situ oil sands operators to UNS G10180 carbon steel. Rotating cylinder electrode (RCE) and rotating cage autoclave (RCA) systems were used as test methods. The susceptibility of the carbon steel to pitting was also evaluated.

Available for download

Corrosion In Dense Slurry And Models Performance

Product Number: 51322-17743-SG

Author: Kofi Freeman Adane, Aaron Fuhr

Publication Date: 2022

$20.00

Slurry pipeline systems are used for the extraction of bitumen from mined ore in the oil sands industry in Alberta, Canada. Most of these extraction processes are open to atmosphere resulting in significant air ingress and entrainment within the slurry pipelines used to transport mined ore and tailings. In addition, for short hydrotransport slurry pipelines, the slurry is conditioned by air to create bubbles coated with a bitumen film called “air-sacks”.

Products tagged with 'oil sands'

Association for Materials Protection and Performance