AMPP Store - Products tagged with 'phosphonate'

Available for download

02030 TETRAKISHYDROXYMETHYLPHOSPHONIUM SULFATE (THPS) FOR DISSOLVING IRON SULFIDES DOWNHOLE AND TOPSIDE - A STUDY OF THE CHEMISTRY INFLUENCING DISSOLUTION

Product Number: 51300-02030-SG

ISBN: 02030 2002 CP

Author: Paul D Gilbert, Jason M Grech, Robert E Talbot, Malcolm A Veale, and Kansas A Hernandez

Publication Date: 2002

$20.00

Recently, it has become apparent that THPS, often used as a biocide in oilfield operations, also dissolves iron sulfide scales. The chemistry of this process is reviewed and a study of iron sulfide dissolution, over a range of conditions, is reported.

Available for download

51315-5646-Structure and Stoichiometry of Mixed Divalent Metal (Ca²+/Mg²?+Sr²+/Ba²+) Phosphonate Scale Inhibitor Complexes

Product Number: 51315-5646-SG

ISBN: 5646 2015 CP

Author: Scott Shaw

Publication Date: 2015

$20.00

Previously, precipitation of SI and Ca2+ was investigated. Similar work has also been performed by other researchers. The current paper presents corresponding experimental results where the binding of divalent cations Ca2+ and Sr2+ to 9 phosphonate SIs at pH 8.5, 95oC is investigated.

Available for download

A Further Look At The Impacts Of Corrosion Inhibitor On Scale Prevention

Product Number: 51322-17676-SG

Author: Qiwei Wang, Tao Chen, Hameed Al-Badairy, Sultan Alsubaie, Yasser Al-Jeshi, Mohammad Alsidan

Publication Date: 2022

$20.00

Scale and corrosion inhibitors are commonly used in many oil and gas production systems to prevent inorganic deposition and to protect asset integrity. Scale inhibitor products are based on organic compounds with phosphate or carboxylic functional groups such as amino phosphonates, phosphate esters, phosphino polymers, polycarboxylate and polysulfonates,1 as shown in Figure 1. These anionic groups have strong affinity to alkaline earth cations and can adsorb on the active growth sites of scale crystal (Figure 2), resulting in stopping or delaying the scale formation process.

Available for download

Enhanced Scale Inhibitor Squeeze Treatment With A Newly Developed Chemical Additive

Product Number: 51321-16802-SG

Author: Ping Chen; Tawfik Al-Ghamdi; Zhiwei (David) Yue; Thomas Hagen; Mohamed Hamam; Hicham El Hajj

Publication Date: 2021

$20.00

Available for download

Metal Sulfide Scale Inhibitors

Product Number: 51320-14459-SG

Author: Konstantinos D. Demadis, Argyro Spinthaki, George Petratos, Juergen Matheis, Duygu Disci-Zayed, Wolfgang Hater

Publication Date: 2020

$20.00

Metal sulfide mineral scaling, fouling and deposition are frequently encountered problems in geothermal systems. Their formation, crystallization and deposition occur principally because of their extremely low solubility, based on the low solubility product (Ksp). Among the metal sulfides that cause problematic issues, the most common ones are iron sulfide (FeS), zinc sulfide (ZnS), lead sulfide (PbS), and, less frequently, antimony sulfide(s) (Sb2S3 and Sb2S5). Zinc sulfide, for example, has a Ksp of 2·10-25 mol²/L², whereas for PbS, it is 1·10-28 mol²/L² (~ three orders of magnitude less soluble). ZnS can precipitate either as Sphalerite or Zinc Blende, and PbS commonly crystallizes as Galena. Mitigation of such ZnS and PbS precipitates and deposits can be achieved by chemical interventions, by the addition of organic chemical additives to the water. Herein, we report the inhibitory effects of phosphonate-based chemical additives for ZnS and PbS scales. These additives can inhibit formation of sulfide scale, and, significantly, prevent its deposition on metal surfaces. The efficiency of these additives is dosage-dependent, and relatively high inhibitor concentrations are needed for their inhibitory activity to take place. Possible mechanisms will be discussed focusing on inhibition and dispersion.

Available for download

Mitigation Of Scaling Potential Using Organophosphorus Phosphonates In High-Temperature And High-Hardness Carbonate Formations

Product Number: 51322-17588-SG

Author: Jian Hou, Tao Chen, Ming Han, Mohammed Bataweel

Publication Date: 2022

$20.00

Scale is an adherent deposit of inorganic compounds precipitated from water onto surfaces. Most oilfield waters contain certain amounts of dissolved calcium, barium or strontium salts. The mineral scale can be formed by chemical reactions in the formation water itself, by mixing of formation water with injected seawater, or by mixing of the well streams of two incompatible oilfield waters. In carbonate reservoirs, when calcium is deposited as calcium sulfate or calcium carbonate scale, a loss of production and increased maintenance expenses can result. Therefore, effective mitigation of scaling potential is of importance to the oil producers.

Available for download

Nanotechnology-Based Detection Method for Speciation and Differentiation of Phosphonate Scale Inhibitors

Product Number: 51320-14913-SG

Author: Sankaran Murugesan, Haiping Lu, Zhengwei Liu, Stephen Heath

Publication Date: 2020

$20.00

The accurate and precise analysis of scale inhibitors plays an important role in making key decisions on the efficiency of scale squeeze and continuous-chemical injection treatments. At present, several techniques exist for scale inhibitor analysis, but each method has its own limitations and tedious analysis process. In addition, these methods often give results of either total chemical content or elemental analysis without details of chemical speciation. Especially for phosphonate scale inhibitors, it is well known that there is no analytical methods available on the market to differentiate different species of phosphonate inhibitors, which impedes the applications of different types of phosphonate inhibitors on the scale treatment. There was therefore a need for a next-generation method for phosphonate analysis. An experimental methodology has been developed based upon the use of gold nanoparticles to enhance chemical signatures of scale inhibitors in brines using Surface Enhanced Raman Spectroscopy (SERS). This methodology enables speciation and measurement at low concentrations in the range of 1 to 100 mg/L (ppm). This study used two different phosphonate-type scale inhibitors, and initial laboratory results prove that this novel technology can help to differentiate between two different phosphonate-based chemicals.

Available for download

Stressed Alkaline Cooling Water Deposit Control: High Temperature Suspended Solids and Iron Impacts

Product Number: 51317--9422-SG

ISBN: 9422 2017 CP

Author: Libardo Perez

Publication Date: 2017

$20.00

This paper discusses cooling water treatment program metal-phosphate/phosphonate scale formation control efficacy when operating under stressed alkaline conditions (e.g., high temperatures, suspended solids, and iron).

Available for download

The Impact of Ultra-Low Temperature Sandstone Reservoirs on Scale Inhibitor Retention

Product Number: 51317--9107-SG

ISBN: 9107 2017 CP

Author: Myles Jordan

Publication Date: 2017

$20.00

Issues faced by operators with low temperature sandstone reservoirs of only 40°C and 54°C and challenges these low temperatures brought, including high MIC for sulphate scale control and poor chemical retention & release properties during the reservoir condition corefloods.

Available for download

TM0399-2018, Determination of Phosphonate Concentration in Water

Product Number: 21238-SG

ISBN: 1-57590-084-X

Publication Date: 2018

$109.00

STABILIZATION NOTICE: This document has been declared “Stabilized” by NACE Task Group (TG) 414 under the auspices of Specific Technology Group (STG) 31 and will no longer be subjected to periodic reviews for currency.

This standard test method is a colorimetric determination of low concentrations of phosphonate residuals in water from oil and gas production, water injection/disposal, and other industrial applications.

Available for download

TM0399-HD1999-Standard Test Method for Phosphonate in Brine-HD1999

Product Number: 21089-HD1999

ISBN: 1-57590-084-X

Publication Date: 1999

$179.00

Colorimetric determination of phosphonate in the range of 0.1 to 5 mg/L in brines from gas and oil production operations, water injection/disposal operations, and other industrial applications. Historical Document 1999

Available for download

TM0399-HD2005-SG Standard Test Method for Phosphonate in Brine

Product Number: 21238-HD2005

ISBN: 1-57590-084-X

Author: NACE International

Publication Date: 2005

$179.00

This standard is intended for use in analyzing low concentrations of phosphonate in brine containing interfering elements. Historical Document 2005

Products tagged with 'phosphonate'

Association for Materials Protection and Performance