Save 20% on select titles with code HIDDEN24 - Shop The Sale Now
The author previously introduced a method to evaluate protective coatings using a novel segmented cell approach. (1) Briefly, the technique intended to monitor natural current exchange between isolated segments, coated or uncoated, to supplement visual rankings of coating performance. The goal was to predict failure earlier than might otherwise be visible or to distinguish between coatings that had a similar visual appearance at the end of the proscribed test period. The experimental design also allowed for the instrumented segments, which act as sensors, to be prepared and coated as intended for a real-world industrial exposure, i.e., the metallic surfaces could be abrasive blasted and painted unlike thin-film, foil-like sensors also explored for similar purposes.
This paper will discuss methods to evaluate the corrosion of substrates and breakdown of protective coatings subject to wet-dry cycling in natural and accelerated environments. Principally the discussion concerns the ability to monitor on-going corrosion deterioration to predict coating failure in a real-world environment without having to accelerate (i.e., artificially harshen) the environment.
Potash is mined from deep underground deposits left by ancient inland seas or extracted from saltwater bodies. The typical composition of potash is 40% potassium chloride (KCl), 55% sodium chloride (NaCl) and 5% clay. About 95% of potash is used for fertilizer in agriculture; the remaining 5% is used in commercial and industrial products such as soap, water softeners, de-icers, drilling muds etc.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
Pulsed Eddy Current (PEC) technology is a widely accepted inspection method now covered by several industry standards such as ISO(1) 20669, API(2) RP 583, and the new ASME(3) Section V (BPVC for Boiler and Pressure Vessel Code), article 21. PEC is a versatile inspection technology which provides an average remaining wall thickness through insulation and coatings. The technique can also be used to safely assess the minimum remaining ligament under corrosion scabs or blisters without surface preparation. PEC is resilient to liftoff variations and provides volumetric measurements of remaining material. It is capable of both detecting and assessing general corrosion on the outer surface of the pipes such as scabs and blisters, and detecting erosion or Flow Accelerated Corrosion (FAC) on the inner surface.
Calcium carbonate precipitation in the presence of pollutants is a carrier of importance for their transport to the sediments and for their subsequent release depending on the local microenvironment conditions. Zinc is often present in industrial waters (heat exchangers and boilers) mainly for corrosion protection. Depending on the alkalinity and calcium concentration of waters used in water intensive processes, calcium carbonate fouling is common. Moreover, among other metals, is present in natural waters together with iron and copper, where the concentration of Zn(II) may reach at levels of several ppm.