Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

51312-01298-Non-Osmotic Blistering Mechanism in FBE Coatings

Picture for Non-Osmotic Blistering Mechanism in FBE Coatings
Available for download
Product Number: 51312-01298-SG
ISBN: 01298 2012 CP
Author: King Him Lo
Publication Date: 2012
$0.00
$20.00
$20.00
A major failure mode of FBE coating and/or epoxy lining during service is the formation of blisters during hot water immersion and/or when subjected to cold wall effect. There are several reasons for a coating to develop blisters. Osmotic blistering is a common explanation for the formation of blisters in hot water immersion. However it has been observed that even without salt contamination FBE/epoxy coating can still blister under hot water soak and cold wall effect. The purpose of this paper is to evaluate the blistering mechanisms in the coating and to relate the formation of blisters to the swelling of the FBE/epoxy coating due to water absorption and cold water effect. The results of the study can be used to guide the coating manufacturers to develop more appropriate coating products to resolve the blistering issues and to assist the end users to select proper coating materials for their specific applications. Key Words: FBE/epoxy coating blistering hot water immersion cold wall effect swelling
A major failure mode of FBE coating and/or epoxy lining during service is the formation of blisters during hot water immersion and/or when subjected to cold wall effect. There are several reasons for a coating to develop blisters. Osmotic blistering is a common explanation for the formation of blisters in hot water immersion. However it has been observed that even without salt contamination FBE/epoxy coating can still blister under hot water soak and cold wall effect. The purpose of this paper is to evaluate the blistering mechanisms in the coating and to relate the formation of blisters to the swelling of the FBE/epoxy coating due to water absorption and cold water effect. The results of the study can be used to guide the coating manufacturers to develop more appropriate coating products to resolve the blistering issues and to assist the end users to select proper coating materials for their specific applications. Key Words: FBE/epoxy coating blistering hot water immersion cold wall effect swelling
Product tags
Also Purchased
Picture for Fusion Bonded Epoxy Coatings (FBE) and Disbondment
Available for download

Fusion Bonded Epoxy Coatings (FBE) and Disbondment

Product Number: 51316-7246-SG
ISBN: 7246 2016 CP
Author: Mehrooz Zamanzadeh
Publication Date: 2016
$20.00

In this paper, failure analysis methodology will be applied to the principal mechanisms by which FBE coatings fail during long term service; with specific application to case studies involving blistering. The case studies apply standard failure analysis techniques to determine the primary causes and modes of failures.
Picture for 98612 EFFECT OF CONTAMINANTS ON FBE
Available for download

98612 EFFECT OF CONTAMINANTS ON FBE PERFORMANCE

Product Number: 51300-98612-SG
ISBN: 98612 1998 CP
Author: Valmore Rodriguez, Lino Castaneda, Beatriz Luciani
$20.00
Picture for Blistering Mechanism of High Tg Temperature FBE Coatings
Available for download

51318-11533-Blistering Mechanism of High Tg Temperature FBE Coatings

Product Number: 51318-11533-SG
Author: Sherry (Shan) Rao / Shaoguang Feng
Publication Date: 2018
$20.00

The objective of this study is to investigate blistering formation of high glass-transition- temperature (Tg) fusion bonded epoxy (FBE) coatings in an attempt to understand the blistering mechanism.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support