AMPP Store - NACE Standards

SPECIALTY PACKAGE: NACE/SSPC Joint Surface Preparation Standards Package 2006-2018

Product Number: 21856-SG

$350.00

NACE/SSPC Joint Surface Preparation Standards Package.

SSPC-SP 5/NACE No. 1-2006, White Metal Blast Cleaning

SSPC-SP 10/NACE No. 2-2006, Near-White Metal Blast Cleaning

SSPC-SP 6/NACE No. 3-2006, Commercial Blast Cleaning

SSPC-SP 7/NACE No. 4-2006, Brush-Off Blast Cleaning

SSPC-SP 13/NACE No. 6-2018, Surface Preparation of Concrete

SSPC-SP 14/NACE No. 8-2006, Industrial Blast Cleaning

Available for download

SSPC-SP 10 /NACE No. 2-2006, Near-White Metal Blast Cleaning

Product Number: 21066-SG

Publication Date: 2006

$179.00

HISTORICAL DOCUMENT. Requirements for "Near-White Metal" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

Product Number: SSPC-SP 10/NACE No. 2-2024

Publication Date: 2024

$109.00

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a) to remove material from the surface that can cause early failure of the coating, and

b) to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

Degree of Surface Cleanliness	Designation
White Metal Blast Cleaning	SSPC-SP5/NACE No. 1
Near-White Metal Blast Cleaning	SSPC-SP10/NACE No. 2
Commercial Blast Cleaning	SSPC-SP6/NACE No. 3
Industrial Blast Cleaning	SSPC-SP14/NACE No. 8
Brush-Off Blast Cleaning	SSPC-SP7/NACE No. 4
Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance	SSPC-SP18

Available for download

SSPC-SP 13/NACE No. 6-2024, Surface Preparation of Concrete

Product Number: SSPC-SP 13/NACE No. 6-2024

$109.00

This AMPP standard covers the preparation of concrete surfaces before the application of protective coating or lining systems. This standard should be used by specifiers, applicators, inspectors, and others who are responsible for defining a standard degree of cleanliness, strength, profile, and dryness of prepared concrete surfaces.

Available for download

SSPC-TR2/NACE Publication TR6G198-1998, Wet Abrasive Blast Cleaning

Product Number: 24199-SG

$179.00

HISTORICAL DOCUMENT. Procedures, equipment, and materials used for air/water/abrasive, water/abrasive, and pressurized water/abrasive blasting. Inhibitors, equipment maintenance & safety guidelines also included.

Surface Finishing of Welds Prior to Coating; Weld Comparator Only

Product Number: 22001-1

ISBN: Plastic Weld Comparator Only

$85.00

This visual comparator is used with the latest version of NACE SP0178 (sold separately), mentioned in Appendix C, to determine whether welds are suitable for coating. This durable T Grade ABS plastic weld replica is molded from actual welds and includes 14 welds for comparison of various degrees of surface finishing (full-seam welds, skip welds, butt welds, lap welds, and others). Use of this visual aid will facilitate weld inspection by the end user.

Available for download

TM0101-2012-SG (Redline), "Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems" (Redline)<br><em>Redline versions of standards show the changes to the current edition of the standard since the last edition. Changes are shown in underline and strikeout. With the Redline, users will be able to quickly identify additions and deletions from the prev

Product Number: 21261-SG

ISBN: 1-57590-137-4

Publication Date: 2012

$109.00

Available for download

TM0101-2012-SG Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems

Product Number: 21240-SG

ISBN: 1-57590-137-4

Publication Date: 2012

$109.00

Measurement techniques and precautions commonly on underground tanks to determine if compliance with a specific criterion has been achieved.

Available for download

TM0104-2004-SG Offshore Platform Ballast Water Tank Coating System Evaluation

Product Number: 21243-SG

ISBN: 1-57590-193-5

$109.00

Test methods to evaluate ballast water tank coatings on offshore rigs - tension leg platforms (TLPs), semi-submersible platforms, or floating production and storage offloading systems (FPSOs).

Available for download

TM0105-2018, “Evaluation of Coatings Containing Conductive Carbon Additives for Use as an Anode on Atmospherically Exposed Reinforced Concrete”

Product Number: 21247-SG

ISBN: 1-57590-200-1

Publication Date: 2018

$109.00

This standard provides a test method to evaluate coatings containing conductive carbon additives for use as an anode on atmospherically exposed reinforced concrete.

Available for download

TM0105-HD2016, “Evaluation of Coatings Containing Conductive Carbon Pigmentation for Use as an Anode on Atmospherically Exposed Reinforced Concrete”

Product Number: 21247-HD2016

ISBN: 1-57590-200-1

Publication Date: 2016

$179.00

Test method to evaluate coatings w/conductive carbon pigmentation as Cathodic Protection (CP) anodes on atmospherically exposed reinforced concrete. Anode coatings are not to provide a protective barrier. HISTORICAL DOCUMENT

Available for download

TM0106-2016-SG, Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion (MIC) on External Surfaces of Buried Pipelines

Product Number: 21248-SG

ISBN: 1-57590-206-0

Publication Date: 2016

$109.00

Types of microorganisms and mechanisms by which MIC occurs on external surfaces of buried, ferrous-based metal pipelines. Testing for the presence of bacteria, research results, and interpretation.

NACE Standards

Recently Revised

NACE Course Standards

SPECIALTY PACKAGE: NACE/SSPC Joint Surface Preparation Standards Package 2006-2018

SSPC-SP 10 /NACE No. 2-2006, Near-White Metal Blast Cleaning

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

SSPC-SP 13/NACE No. 6-2024, Surface Preparation of Concrete

SSPC-TR2/NACE Publication TR6G198-1998, Wet Abrasive Blast Cleaning

Surface Finishing of Welds Prior to Coating; Weld Comparator Only

TM0101-2012-SG Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems

TM0104-2004-SG Offshore Platform Ballast Water Tank Coating System Evaluation

TM0105-2018, “Evaluation of Coatings Containing Conductive Carbon Additives for Use as an Anode on Atmospherically Exposed Reinforced Concrete”

TM0105-HD2016, “Evaluation of Coatings Containing Conductive Carbon Pigmentation for Use as an Anode on Atmospherically Exposed Reinforced Concrete”

TM0106-2016-SG, Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion (MIC) on External Surfaces of Buried Pipelines

Association for Materials Protection and Performance