Menu
Search
Filters
Close
Menu

51316-7089-MP-ICDA Analysis On Block 12 And Block 15 Gathering Pipelines On Petroamazonas EP

Picture for MP-ICDA Analysis On Block 12 And Block 15 Gathering Pipelines On Petroamazonas EP
Available for download

In 2010, mechanical integrity personnel started the application of the Direct Assessment (DA) and Inline Inspection Methodologies (ILI) to establish the integrity validation baseline assessments for a Pipeline Integrity Program (PIP) for the pipelines operated within Blocks 12 and 15 by Petroamazonas EP, in Ecuador.

Product Number: 51316-7089-SG
ISBN: 7089 2016 CP
Author: Carlos Melo Gonzalez
Publication Date: 2016
Industries: Gas/Liquid Pipelines , Corrosion Monitoring and Control
$0.00
$20.00
$20.00

In 2010, mechanical integrity personnel started the application of the Direct Assessment (DA) and Inline Inspection Methodologies (ILI) to establish the integrity validation baseline assessments for a Pipeline Integrity Program (PIP) for the pipelines operated within Blocks 12 and 15 by Petroamazonas EP, in Ecuador.  There were four preconditions which justified the implementation of these methodologies:

1. Following the CFR Title 49, Part-195.6, the Blocks 12 and 15, are classified as Unusually Sensitive Areas (USA’s).

2. Pressure Testing had been the only Integrity Validation Technique applied to all the pipelines and was performed only after the construction of the line to verify the weldments installed but NOT any in-service defect detection.

3. There are pipelines that have been operating for more than 20 years without any integrity assessment beyond the initial construction hydro test.

4. There have been several internal corrosion failures of some pipelines at Blocks 12 and 15 resulting in significant and important economic losses to the operation.

For the implementation of the DA and ILI methodologies the following NACE International and API (American Petroleum Institute) Standard Practices were used as guidelines: NACE SP-0502 for External Corrosion Direct Assessment, NACE SP-0102 and API-1163 for the Inline Inspection Program and NACE MP-ICDA (by the TG-426 and now being published for a late 2015 release) for Internal Corrosion Direct Assessment.

Key words: downloadable, pipeline integrity program, direct assessment, Ecuador

 

 

In 2010, mechanical integrity personnel started the application of the Direct Assessment (DA) and Inline Inspection Methodologies (ILI) to establish the integrity validation baseline assessments for a Pipeline Integrity Program (PIP) for the pipelines operated within Blocks 12 and 15 by Petroamazonas EP, in Ecuador.  There were four preconditions which justified the implementation of these methodologies:

1. Following the CFR Title 49, Part-195.6, the Blocks 12 and 15, are classified as Unusually Sensitive Areas (USA’s).

2. Pressure Testing had been the only Integrity Validation Technique applied to all the pipelines and was performed only after the construction of the line to verify the weldments installed but NOT any in-service defect detection.

3. There are pipelines that have been operating for more than 20 years without any integrity assessment beyond the initial construction hydro test.

4. There have been several internal corrosion failures of some pipelines at Blocks 12 and 15 resulting in significant and important economic losses to the operation.

For the implementation of the DA and ILI methodologies the following NACE International and API (American Petroleum Institute) Standard Practices were used as guidelines: NACE SP-0502 for External Corrosion Direct Assessment, NACE SP-0102 and API-1163 for the Inline Inspection Program and NACE MP-ICDA (by the TG-426 and now being published for a late 2015 release) for Internal Corrosion Direct Assessment.

Key words: downloadable, pipeline integrity program, direct assessment, Ecuador

 

 

Product tags
Also Purchased
Picture for Internal Corrosion Direct Assessment For Offshore Pipelines
Available for download

51316-7092-Internal Corrosion Direct Assessment For Offshore Pipelines

Product Number: 51316-7092-SG
ISBN: 7092 2016 CP
Author: Eugene Ogosi
Publication Date: 2016
$20.00

Inspection of offshore pipelines is essential to provide vital information required for integrity assessment to allow data driven engineering decisions to be made and prevent costly failures. This paper presents experience from applying Internal Corrosion Direct Assessment (ICDA) for offshore pipelines in the North Sea.
Picture for Failure Analysis for a Piggable Pipeline Through ICDA Methodology
Available for download

51318-10869-Failure Analysis for a Piggable Pipeline Through ICDA Methodology

Product Number: 51318-10869-SG
Author: Abdul Razzaq Al-Shamari / Amer Jarragh / Ashish Khera / Shabbir Safri / Abdul Salam / Patrick J. Teevens
Publication Date: 2018
$20.00

In May, 2014, a total of five leaks were reported in two 34” (863 mm) diameter pipelines (both only 5 years in operation) due to internal corrosion. This paper describes all the activities that have been carried out determine the root cause.
Picture for Successful Application of Internal Corrosion Direct Assessment (ICDA) to determine the Integrity of of an Indian Offshore SPM Pipeline
Available for download

51318-11308-Successful Application of Internal Corrosion Direct Assessment (ICDA) to determine the Integrity of of an Indian Offshore SPM Pipeline

Product Number: 51318-11308-SG
Author: Patrick J. Teevens / Sridhar Arumugam / Ashish Khera / Bidyut Baniah
Publication Date: 2018
$20.00

The study presents the internal corrosion direct assessment (ICDA) of a 48” x 18.7 km liquid petroleum pipeline carrying crude oil from a subsea pipeline end manifold (PLEM) to the onshore crude oil tank facilities.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support