Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

MEA Triazine Contactor Optimization to Increase Efficiency and Reduce Fouling Potential

Picture for MEA Triazine Contactor Optimization to Increase Efficiency and Reduce Fouling Potential
Available for download
Liquid absorbents have been utilized for decades to remove impurities from produced natural gas. Throughout the last 15 years, monoethanolamine (MEA) triazine has become an industry-recognized name for the removal of sour gas (H2S). MEA triazine has one of the lowest cost profiles in terms of cost per mass of H2S removed and has obtained a commodity status. It is widely used in the oil and gas industry, both on production (upstream, midstream) and processing (downstream). MEA Triazine is typically applied via direct injection into flowlines or applied in contactor vessels (“scrubbers”, “towers”, “bubble columns”). The application type depends on numerous factors but in general, the application via contactor vessel is preferred due to its increased efficiency. However, due to the many different contactor configurations available, a wide range of efficiencies are achieved, ranging from 50 – 70%. MEA Triazine systems are also known to foul with acid-insoluble polymeric solids. This occurs when the MEA Triazine and its reaction products are not managed properly, or the system is not designed for the specific conditions. The spent material, commonly referred to as dithiazine, can form solids (amorphous dithiazine) in the contactor packing, post contactor separator, or in downstream pipelines if carry-over occurs. This paper aims to provide the reader guidance on how to optimize MEA Triazine contactor vessels to achieve maximum efficiency and to reduce or eliminate fouling. Optimization principles discussed will include contactor configurations, contactor modifications, and MEA Triazine properties and its effect on system performance. Increasing system efficiency and eliminating solids formation in these systems will have a direct impact on the user’s operating expense (OPEX). This is due to better scavenger utilization and a reduction in maintenance and downtime due to solids formation. A reduction in scope three emissions will also be achieved.
Product Number: 51324-20391-SG
Author: Willem-Louis Marais
Publication Date: 2024
$40.00
$40.00
$40.00
Product tags
Also Purchased
Picture for 96612 EFFECT OF OXYGEN ON THE INTERNAL
Available for download

96612 EFFECT OF OXYGEN ON THE INTERNAL CORROSION OF NATURAL GAS PIPELINES

Product Number: 51300-96612-SG
ISBN: 96612 1996 CP
Author: C.L. Durr, J.A. Beavers
$20.00
Picture for 11120 Sulfur Corrosion Due To Oxygen Ingress
Available for download

11120 Sulfur Corrosion Due To Oxygen Ingress

Product Number: 51300-11120-SG
ISBN: 2011 11120 CP
Author: Joseph Boivin and Scott Oliphant
Publication Date: 2011
$20.00

 Case histories are presented where Oxygen ingress has led to Sulfur corrosion failures in pipelines and downhole equipment. 

 
Picture for 07571 Chemistry and Impacts of Commonly Used Amine-Based H2S Scavengers on Crude Unit Towers and Overheads
Available for download

07571 Chemistry and Impacts of Commonly Used Amine-Based H2S Scavengers on Crude Unit Towers and Overheads

Product Number: 51300-07571-SG
ISBN: 07571 2007 CP
Author: John M. Garcia and Samuel A. Lordo
Publication Date: 2007
$20.00

This paper discusses the chemistry and fate of two commonly used triazine H2S scavengers and their reaction by-products with respect to their impact on crude unit overhead corrosion and fouling.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support