Menu
Search
Filters
Close
Menu

Long- And Short Term Laboratory Testing Of UNS N06985 For OCTG In Extreme Sour Environments

Long- And Short-Term Laboratory Testing Of UNS N06985 For OCTG In Extreme Sour Environments
Available for download

UNS N06985 is a nickel-based alloy with additions of Mo, Cu and W. Because of its high strength and high resistance to stress corrosion cracking (SCC), cold worked UNS N06985 has been extensively used for OCTG (Oil Country Tubular Goods). The SCC initiation has been studied in Cl-H2S-CO2 containing sour environments; and the SCC resistance was often evaluated using slow strain rate testing (SSRT) for screening by short-term testing and using tensile or C-ring for verification by long-term autoclave testing exposures1. UNS N06985 showed high resistance to SCC at high temperatures in elemental sulfur containing environments with moderate chlorides2.

Product Number: 51322-17966-SG
Author: Wenle He, Charlotte Ulfvin, Per Olsson Artberger
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings
$0.00
$20.00
$20.00

UNS N06985 is a nickel-based alloy with additions of Mo, Cu and W. Because of its high strength and high resistance to stress corrosion cracking (SCC), cold worked UNS N06985 has been extensively used for OCTG (Oil Country Tubular Goods). To meet deeper and more challenging environments, tube products manufactured in high quality corrosion resistant alloys (CRAs) are required.  Recently, cold worked UNS N06985 tubes have been developed and produced for OCTG in specified minimum yield strength 110 ksi and 125 ksi in two dimensions. Laboratory testing has provided mechanical properties and corrosion resistance to localized corrosion and SCC. The SCC resistance has been verified using both short-term SSRT and long-term autoclave exposures using C-ring and mass loss for 90 days. The SSRT was performed in the maximum boundary conditions of environmental limits for 4d type nickel-based alloys per ISO15156-3, whereas the long-term autoclave exposures were performed in a condition outside of the limits for the 4d type materials. With comparison to the commercial tube products of UNS N06985 in literature, the newly developed tube materials of grades 110 ksi and 125 ksi showed high SCC resistance and stable mechanical properties. The tube materials fulfill ISO13680/API-5CRA requirement and ISO15156-3.

UNS N06985 is a nickel-based alloy with additions of Mo, Cu and W. Because of its high strength and high resistance to stress corrosion cracking (SCC), cold worked UNS N06985 has been extensively used for OCTG (Oil Country Tubular Goods). To meet deeper and more challenging environments, tube products manufactured in high quality corrosion resistant alloys (CRAs) are required.  Recently, cold worked UNS N06985 tubes have been developed and produced for OCTG in specified minimum yield strength 110 ksi and 125 ksi in two dimensions. Laboratory testing has provided mechanical properties and corrosion resistance to localized corrosion and SCC. The SCC resistance has been verified using both short-term SSRT and long-term autoclave exposures using C-ring and mass loss for 90 days. The SSRT was performed in the maximum boundary conditions of environmental limits for 4d type nickel-based alloys per ISO15156-3, whereas the long-term autoclave exposures were performed in a condition outside of the limits for the 4d type materials. With comparison to the commercial tube products of UNS N06985 in literature, the newly developed tube materials of grades 110 ksi and 125 ksi showed high SCC resistance and stable mechanical properties. The tube materials fulfill ISO13680/API-5CRA requirement and ISO15156-3.

Product tags
Also Purchased
Picture for Long-Term Cost Saving By Using High Alloyed Stainless Steel In Seawater Coolers
Available for download

Long-Term Cost Saving By Using High Alloyed Stainless Steel In Seawater Coolers

Product Number: 51322-17544-SG
Author: Jonas Höwing
Publication Date: 2022
$20.00

Copper alloys such as copper nickel (CuNi) and Admiralty Brass (CuZn) are often successful material selections for seawater coolers. The copper alloys successes in these highly corrosive environments can be attributes to the ability of copper to form a protective scale, thus stopping corrosion of the material. On copper alloys in seawater, the protective scale formed comprises a mix of cuprous oxide (Cu2O), copper oxide (CuO) and copper hydroxy chlorides.
Picture for Long-Term Case Studies Of Cathodic Protection Along The Texas Gulf Coast
Available for download

Long-Term Case Studies Of Cathodic Protection Along The Texas Gulf Coast

Product Number: 51322-17734-SG
Author: Stephen W. Foster, Kyle Myers
Publication Date: 2022
$20.00

Managing aging reinforced concrete infrastructure is a complex and capital-intensive task, particularly in harsh marine and coastal environments. Corrosion from saltwater, coupled with wet and dry cycles, are particularly problematic for long-term durability of reinforced concrete. The Gulf Coast presents a challenge for maintaining service life of concrete structures that are exposed to high levels of chlorides, either by direct contact with salty or brackish water or by indirect contact with salt spray. Chlorides induce corrosion of the steel reinforcement which initiates cracking and spalling of the concrete, reducing the service life of the structure.
Picture for Mechanistic Modeling Of The Impedance Response Of Cathodic Reduction Of Hydrogen Ion In Strong Acidic Environments
Available for download

Mechanistic Modeling Of The Impedance Response Of Cathodic Reduction Of Hydrogen Ion In Strong Acidic Environments

Product Number: 51322-17900-SG
Author: Negar Moradighadi, Yoon-Seok Choi, Srdjan Nesic
Publication Date: 2022
$20.00

EIS is one of the techniques which is frequently used for studying electrochemical reactions on a metal surface in an aqueous environment. However, one of the main challenges in using EIS is the interpretation of results. Various interpretation methods and their associated uncertainties lead to ambiguous outcomes and often end up with a biased analysis One of the methods frequently used is the so-called “equivalent electrical circuit” method which models the response of and electrochemical system by matching it to that of a combination of “analogous” electrical circuit components, such as resistors, inductors, capacitors, etc.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support