Menu
Search
Filters
Close
Menu

Lighting Applications for Protective Coatings: The LED Advantage

Lighting Applications for Protective Coatings: The LED Advantage
Available for download

The use of advanced LED (Light Emitting Diodes) lighting for protective coating applications provides a significant improvement in the efficiency of the process. Better surface and area visibility improves job performance and is critical for compliant coating application and provides a better work environment for the technicians applying the coat.

Product Number: 41211-624-SG
Author: Michael S. Kralik
Publication Date: 2011
Industry: Coatings
$0.00
$20.00
$20.00

The use of advanced LED (Light Emitting Diodes) lighting for protective coating applications provides a significant improvement in the efficiency of the process. Better surface and area visibility improves job performance and is critical for compliant coating application and provides a better work environment for the technicians applying the coat.

The use of advanced LED (Light Emitting Diodes) lighting for protective coating applications provides a significant improvement in the efficiency of the process. Better surface and area visibility improves job performance and is critical for compliant coating application and provides a better work environment for the technicians applying the coat.

Product tags
Also Purchased
SSPC-VIS 1: Guide and Reference Photographs for Steel Surfaces prepared by Dry Abrasive Blast Cleaning

SSPC VIS 1

Product Number: PB-00212
Publication Date: 2012
$210.00

This guide describes the use of reference photographs depicting the appearance of both previously unpainted and previously painted and partially rusted hot-rolled carbon steel prior to and after abrasive blast cleaning.

The reference photographs consist of a series of 1:1 (actual size) color photographs. The photographs were taken under controlled studio lighting designed to show the maximum detail possible.

Highlighted in the guide are five initial rust conditions before surface preparation, covering the rand from intact mill scale to rusted and pitted steel, as well as previously painted steel.

¡Esta guía de referencia fotográfica está en inglés y español!
Lessons Learned for Painting Over Hot-Dip Galvanizing
Available for download

Lessons Learned for Painting Over Hot-Dip Galvanizing

Product Number: 51217-048-SG
Author: Kevin Irving
Publication Date: 2017
$20.00

This paper provides an introduction to the hot-dip galvanization process as an effective and important coating option and the necessary surface preparation steps for successful painting over hot-drip galvanized steel, also known as a duplex system. Proper practices and procedures must be used to prepare new and weathered zinc-coated surfaces on after-fabrication steel products for painting to improve the bond of paint to the zinc surface and provide long-term protection against corrosion.

 
Ladder Safety - Protecting Workers from a Complex Hazard
Available for download

Ladder Safety - Protecting Workers from a Complex Hazard

Product Number: 51217-051-SG
Author: Stanford T. Liang
Publication Date: 2017
$20.00

It is well known that fall hazards are one of the most common causes of accidents, injuries and death in the workplace including industrial painting projects. Many of these falls occur when using ladders. According to the Bureau of Labor Statistics, for example, in 2009 20% of fatal falls in all workplaces were from ladders. OSHA estimates that there are 24,882 injures, with nearly half of those injuries serious enough to result in lost work time, and 36 fatalities every year.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support