Menu
Search
Filters
Close
Menu

Laboratory Investigations into the Edge Protection of Organic Coatings

Laboratory Investigations into the Edge Protection of Organic Coatings
Available for download

The presentation reports about a nationally funded 3-year R&D project on the effects of edge geometry and coating type on the corrosion protection performance of organic coatings on edges with particular attention to ballast water tank applications. Core of the presentation is the description of the testing scenarios, the introduction of three assessment methods, and the discussion of the results. Testing methods included the long-term testing of samples in a specially designed IMO chamber, the utilization of electric impedance spectroscopy and DFT measurements on polished cross sections of coated edges.

Product Number: 41210-555-SG
Author: Sascha Buchbach, Andreas W. Momber
Publication Date: 2010
Industry: Coatings
$0.00
$20.00
$20.00

The presentation reports about a nationally funded 3-year R&D project on the effects of edge geometry and coating type on the corrosion protection performance of organic coatings on edges with particular attention to ballast water tank applications. Core of the presentation is the description of the testing scenarios, the introduction of three assessment methods, and the discussion of the results. Testing methods included the long-term testing of samples in a specially designed IMO chamber, the utilization of electric impedance spectroscopy and DFT measurements on polished cross sections of coated edges.

The presentation reports about a nationally funded 3-year R&D project on the effects of edge geometry and coating type on the corrosion protection performance of organic coatings on edges with particular attention to ballast water tank applications. Core of the presentation is the description of the testing scenarios, the introduction of three assessment methods, and the discussion of the results. Testing methods included the long-term testing of samples in a specially designed IMO chamber, the utilization of electric impedance spectroscopy and DFT measurements on polished cross sections of coated edges.

Product tags
Also Purchased
Picture for 03010 APPROACHES FOR ACHIEVING SUCCESSFUL
Available for download

03010 APPROACHES FOR ACHIEVING SUCCESSFUL HIGH BUILD COATINGS ON SHARP EDGES IN SHIP'S BALLAST TANKS

Product Number: 51300-03010-SG
ISBN: 03010 2003 CP
Author: M. K. Chung, C. S. Park, C. H. Lee, K. K. Baek
Publication Date: 2003
$20.00

In ship's ballast tanks, most of coating failures (and corrosion attacks) were observed on sharp steel edges, welds seams and weld spatters. One solution is to employ high solid coating material with less tendency to flow away from edges. In this study, two coatings  are selected and evaluated in terms of their edge retention ability.
Picture for Coatings + Proceedings 2021-ALL Papers
Available for download

(Coating Formulation) Coatings on the Edge of Forever

Product Number: 12-COAT_DEC21
Author: Carl Reed / Kat Coronado
Publication Date: 2021
$20.00

A continuing problem with coatings applied to sharp edges of a structure is the corrosion that often develops at the apex of the edge. The conventional wisdom is that the reduction of film thickness, due to coating pulling away at the edge during the curing of the coating, is the primary cause for the onset of corrosion. This theory, however, is not necessarily correct, both from a mechanistic and practical point of view.
Picture for 06015 Why Do We Have Cracks in Epoxy Coatings
Available for download

06015 Why Do We Have Cracks in Epoxy Coatings for Water Ballast Tanks?

Product Number: 51300-06015-SG
ISBN: 06015 2006 CP
Author: E.H.Song, H.I.Lee, M.K.Chung, C.S.Park, C.H.Lee, C.S.Shin, S.K.Lee and K.K.Baek
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support