Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

51318-10557-Investigation & Mitigation of Corroding Bonded Post Tension Tendons

Picture for Investigation & Mitigation of Corroding Bonded Post Tension Tendons
Available for download

Evaluation of Post-Tensioned (PT) structures and the PT impregnation technique to mitigate corrosion of grouted PT tendons. Project case studies and laboratory research will be presented to demonstrate the technique and its effectiveness.

Product Number: 51318-10557-SG
Publication Date: 2018
Industry: Materials Selection and Design
$0.00
$20.00
$20.00

There has been a long history of bonded post-tensioning (PT) in reinforced concrete structures. Generally, these structures have performed well except when bonded PT tendons have suffered from corrosion as a result of grout deficiencies.

For many years cement – water grout was used for grouting PT tendons. Cement – water grouted tendons are likely to have voids in the grout due to the propensity of cement – water grouts to bleed. Prepackaged grouts are generally more robust but they may segregate in certain circumstances. Segregated prepackaged grouts have also contributed to PT strand corrosion.

Evaluation of existing post-tensioned structures is important to determine if defects exist in the grout.

If grouting defects are identified an impregnation system can be used to mitigate corrosion and extend the service life of PT tendons installed in deficient grout.

This paper discusses the evaluation of PT structures and the PT impregnation technique which has been developed to mitigate corrosion of grouted PT tendons. Project case studies and laboratory research will be presented to demonstrate the technique and its effectiveness.

There has been a long history of bonded post-tensioning (PT) in reinforced concrete structures. Generally, these structures have performed well except when bonded PT tendons have suffered from corrosion as a result of grout deficiencies.

For many years cement – water grout was used for grouting PT tendons. Cement – water grouted tendons are likely to have voids in the grout due to the propensity of cement – water grouts to bleed. Prepackaged grouts are generally more robust but they may segregate in certain circumstances. Segregated prepackaged grouts have also contributed to PT strand corrosion.

Evaluation of existing post-tensioned structures is important to determine if defects exist in the grout.

If grouting defects are identified an impregnation system can be used to mitigate corrosion and extend the service life of PT tendons installed in deficient grout.

This paper discusses the evaluation of PT structures and the PT impregnation technique which has been developed to mitigate corrosion of grouted PT tendons. Project case studies and laboratory research will be presented to demonstrate the technique and its effectiveness.

Product tags
Also Purchased
Picture for Corrosion Protection of Reinforced Concrete Columns and Piles in a Marine Environment
Available for download

51318-10558-Corrosion Protection of Reinforced Concrete Columns and Piles in a Marine Environment

Product Number: 51318-10558-SG
Author: David Whitmore
Publication Date: 2018
$20.00

This paper discusses options available to rehabilitate, extend the service life and strengthen damaged columns and piles in marine environments.
Picture for CALCIUM CARBONATE SCALE INHIBITION: EFFECTS OF EOR CHEMICALS
Available for download

51318-10546-CALCIUM CARBONATE SCALE INHIBITION: EFFECTS OF EOR CHEMICALS

Product Number: 51318-10546-SG
Author: Qiwei Wang / Waleed Al-Nasser / Tao Chen / Feng Liang
Publication Date: 2018
$20.00

Laboratory investigation on the impacts of enhanced oil recovery (EOR) chemicals, i.e., surfactant and polymer, on calcium carbonate scale formation and inhibition.
Picture for Localized Corrosion of Mild Steel in Marginally Sour Environments
Available for download

51318-10548-Localized Corrosion of Mild Steel in Marginally Sour Environments

Product Number: 51318-10548-SG
Author: Saba Navabzadeh Esmaeely / Wei Zhang / Bruce Brown / Marc Singer / Srdjan Nesic
Publication Date: 2018
$20.00

In the current study, mild steel specimens (API 5L X65) were exposed to a 1 wt% NaCl solution sparged at 0.096 MPa pCO2 and 15 ×10-6 MPa or less pH2S (≤ 150 ppm H2S/CO2).
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support