Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

Investigating The Effect Of H2S And Corrosion Inhibitor On The Corrosion Of Mild Steel Under High Pressure CO2 Conditions

Investigating The Effect Of H2S And Corrosion Inhibitor On The Corrosion Of Mild Steel Under High Pressure CO2 Conditions
Available for download

Over the past decade, there has been increasing interest in the corrosion behavior of carbon steels in supercritical CO2 conditions. Unlike the case of carbon capture and storage (CCS) where small amounts of water are present, the exploitation of fields with high pressures of CO2 needs to consider the presence of formation water, which presents strong corrosivity. It has been reported that the aqueous corrosion rate of carbon steel at high CO2 pressures (liquid and supercritical CO2) without protective FeCO3 corrosion product layers is very high (>20 mm/y) due to the high concentrations of corrosive species such as H+ and H2CO3.1-5 Steels with low Cr contents (i.e., 1% Cr and 3% Cr) have shown no beneficial effect in terms of reducing the corrosion rate to admissible values.6 Therefore, controlling corrosion in these cases usually involves the use of corrosion resistant alloys (CRAs) or corrosion inhibitors (CI). Adequate protection of carbon steel was achieved by applying CI in high pressure CO2 environments.6  

Product Number: 51322-17943-SG
Author: Yoon-Seok Choi, Fernando Farelas, Luciano Paolinelli, Ahmad Zaki B Abas, Azmi Mohammed Nor, Muhammad Firdaus Suhor
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings
$0.00
$20.00
$20.00

The effect of H2S and corrosion inhibitor on the aqueous corrosion behavior of mild steel was evaluated at high CO2 partial pressure conditions. The experiments were performed in a 7.5 L autoclave with different temperatures (25°C and 80°C) and different H2S concentrations (1000 ppmv and 2000 ppmv) at 12 MPa CO2. The corrosion rate of steel samples was determined by electrochemical and weight loss measurements. The surface and cross-sectional morphology and the composition of the corrosion product layers were analyzed by using surface analytical techniques (SEM, EDS and XRD). Results showed that the presence of 1000 ppmv and 2000 ppmv H2S decreased the corrosion rate of mild steel compared with pure CO2 condition. However, the final corrosion rates were still higher than the targeted threshold (< 0.1 mm/y). Surface and cross-sectional analyses revealed the formation of FeS in the presence of H2S and no localized corrosion was observed. The addition of 400 ppmv of an imidazolinebased corrosion inhibitor reduced the corrosion rate below 0.1 mm/y in high pressure CO2 conditions with 2000 ppmv H2S. 

The effect of H2S and corrosion inhibitor on the aqueous corrosion behavior of mild steel was evaluated at high CO2 partial pressure conditions. The experiments were performed in a 7.5 L autoclave with different temperatures (25°C and 80°C) and different H2S concentrations (1000 ppmv and 2000 ppmv) at 12 MPa CO2. The corrosion rate of steel samples was determined by electrochemical and weight loss measurements. The surface and cross-sectional morphology and the composition of the corrosion product layers were analyzed by using surface analytical techniques (SEM, EDS and XRD). Results showed that the presence of 1000 ppmv and 2000 ppmv H2S decreased the corrosion rate of mild steel compared with pure CO2 condition. However, the final corrosion rates were still higher than the targeted threshold (< 0.1 mm/y). Surface and cross-sectional analyses revealed the formation of FeS in the presence of H2S and no localized corrosion was observed. The addition of 400 ppmv of an imidazolinebased corrosion inhibitor reduced the corrosion rate below 0.1 mm/y in high pressure CO2 conditions with 2000 ppmv H2S. 

Product tags
Also Purchased
Picture for Guidelines for Corrosion Inhibitor Selection for Oil and Gas Production
Available for download

Guidelines for Corrosion Inhibitor Selection for Oil and Gas Production

Product Number: 51317--8842-SG
ISBN: 8842 2017 CP
Author: Johannes Sonke
Publication Date: 2017
$20.00

Recommended corrosion inhibitor (CI) testing methods and interpretation to assure proper execution of a test program. Associated guidance for CI test program definition testing and management to ensure and improve the integrity of carbon steels applications in our Industry.
Picture for Dual Functional Corrosion Inhibitor Design And Testing For Top-Of-Line And Bottom Of Line Corrosion
Available for download

Dual Functional Corrosion Inhibitor Design And Testing For Top-Of-Line And Bottom Of Line Corrosion

Product Number: 51322-17787-SG
Author: Larry Chen, Nihal Obeyesekere, Jonathan Wylde, Michael Sim
Publication Date: 2022
$20.00

TOL corrosion is reported to occur in large diameter wet gas pipeline in stratified flow conditions
due to low fluid velocities1. With increasing distance from the inlet, the wet gas pipeline becomes
cooler as it loses heat to the environment. Such cooling causes water, hydrocarbon, and other
high vapor pressure species to condense on the pipe wall. The upper part of the pipe will
constantly be supplied with freshly condensed water while the less corrosive water saturated
with corrosion products will be drained along the pipe wall to the bottom of the line.
Picture for 98015 Controlling C02 Corrosion with Inhibitor
Available for download

98015 Controlling CO2 Corrosion with Inhibitor

Product Number: 51300-98015-SG
ISBN: 98015 1998 CP
Author: J. A. Dougherty
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support