AMPP Store - Individual Conference Papers

Available for download

Polyurethane/f-Oil Fly Ash-ZnO Atmospheric Corrosion Protective Coating

Product Number: 51321-16345-SG

Author: Mohammad Mizanur Rahman

Publication Date: 2021

$20.00

Available for download

Polyurethanes in Seamless Polymer Flooring Systems

Product Number: 41209-520-SG

Author: Jing Zeng

Publication Date: 2009

$20.00

Polyurethane technologies have demonstrated their applications in a variety of seamless polymer flooring systems. Aliphatic polyurethanes are widely used as topcoats since they provide combinations of good color stability, gloss retention, abrasion resistance, chemical resistance, and weathering resistance. Recent development in polyaspartic chemistry offers more options in coating thickness, curing temperatures, and solids content.

Available for download

Polyyrea Flooring Systems for Concrete a Practical Approach

Product Number: 41205-176-SG

Author: Robert G. Johnson

Publication Date: 2005

$20.00

Spray applied polyurea was introduced to the construction industry in the late 1980 s. By the 1990 s, polyurea floor systems were being installed using early formulations of polyurea, and spray equipment adapted from the polyurethane foam industry. Advancement in raw materials, polyurea formulations, specialized equipment and contractor expertise in recent years has provided increased opportunities for this technology to be used in a wide variety of concrete flooring applications.

Available for download

Portable Closed Loop blasting System a NAVSEA Program

Product Number: 41205-193-SG

Author: Heather Parks, Rob Pressier

Publication Date: 2005

$20.00

This project is to evolve, with the developer of a portable, sponge media blasting system, an alternative to power tool corrosion removal. This is a NAVSEA project managed by the National Surface Treatment Center (NST Center).

Available for download

Portable Plural Component Equipment Utilizing Synergistic Chemistry

Product Number: 41212-718-SG

Author: Chas Weatherford

Publication Date: 2012

$20.00

Portable plural component low-pressure equipment Utilizing Synergistic Chemistry addresses untapped niche market proves to be provides added growth to the industry.

Available for download

Positive Displacement Proportioning of Two-Component Epoxy Intumescent Coatings for Passive Fire Protection

Product Number: 41214-851-SG

Author: Eric P. Rennerfeldt

Publication Date: 2014

$20.00

In today’s protective coating industry, there is a growing demand to proportion and spray 100% solids coatings that are high viscosity and composed of materials that make them compressible during processing. Epoxy intumescent fireproofing is one such material that starts as compressible in the pail and becomes more compressible when heated and agitated under air pressure.

Available for download

Possibilities and Limitations of Modern High-solids Anti-Corrosion Coating Compounds

Product Number: 41206-250-SG

Author: Malte Homann, Thomas Bäker, Michael Casimir

Publication Date: 2006

$20.00

New high-solids compounds for two-component (2K) topcoats based on polyurethane, polyurea and polysiloxane binders are examined with respect to their competitive potential in Europe. Against the backdrop of EU-wide VOC legislation, the relevant market for OEM topcoats applied in stationary facilities is currently estimated at 20,000 t with a material value of a good EUR 100 million.

Available for download

Possibility Of Zinc Embrittlement In Fire

Product Number: 51321-16613-SG

Author: Kazuki Nakao/ Hironori Ogiso/ Shunji Watanabe Shinya Watanabe/ Akihisa Yamaguchi

Publication Date: 2021

$20.00

Available for download

Post Weld Heat Treatment of Oilfield 13Cr Stainless Steels

Product Number: 51324-20919-SG

Author: Krishna Chimbli

Publication Date: 2024

$40.00

Type 13Cr martensitic stainless steels are widely used for threaded and coupled oilfield casing and tubing because of their resistance to corrosion by dissolved carbon dioxide and their cost advantage over most other corrosion-resistant alloys. However, 13Cr used for welded downhole components requires careful planning. Their high hardenability creates a hard heat-affected zone microstructure, which must be tempered by post-weld heat treatment (PWHT) to recover the alloy’s limited resistance to sulfide stress cracking. At the same time, the relatively high strength of downhole 13Cr stainless steel grades (80 to 110 ksi specified minimum yield strength) requires tempering temperatures that limit the maximum PWHT temperature that can be applied without compromising the material’s strength. This publication presents welding procedure qualification of 13Cr grades and experimental work performed to determine how PWHT affects the yield strength of 13Cr grades. Methods are described for establishing a suitable PWHT time and temperature for these alloys.

Available for download

Potassium Hydroxide For PWR Primary Coolant pH Control: EPRI Program

Product Number: ED22-17394-SG

Author: Keith Fruzzetti, Dennis Hussey, Peter Chou, David Perkins

Publication Date: 2022

$20.00

This paper outlines and summarizes the robust testing and assessment program developed and implemented by the Electric Power Research Institute (EPRI), following upon an initial feasibility evaluation completed in 2015. A multi-year, multi-discipline program has been developed, incorporating significant industry input, to address the identified technical gaps in materials, fuels, chemistry, and radiation safety that need evaluation to support a plant demonstration in a Western-design PWR.

Available for download

Potential Distribution and Polarization Effect of Storage Tank Bottoms With Cathodic Protection Applied by MMO-Coated Titanium Anode Grids

Product Number: 51319-13315-SG

Author: Wei Cui

Publication Date: 2019

$20.00

Mixed metal oxide (MMO) is widely used as anode material for the cathodic protection of storage tank bottoms due to its advantages such as low consumption rate long service life and ideal current distribution. However with the elapse of service time the MMO CP systems have been found with such issues as low polarization level and uneven potential distribution threatening the operation safety of storage tanks. In this study numerical modeling and subscale experiment were chosen to clarify the main factors responsible for the aforementioned issues. The results indicated that the inadequacy of polarization and the lack of uniform potential distribution were related to a combination of multiple factors including the anode-to-tank bottom distance the impressed current level and the number of drain points. On the basis of these systematic analyses this paper conclusively proposes certain design principles and maintenance suggestions for the cathodic protection system of tank bottoms.

Available for download

Potential Measurements, How To Effectively Monitor The ‘Health’ Of Your Cathodic Protection System

Product Number: 51322-18042-SG

Author: Eric S. Langelund

Publication Date: 2022

$20.00

Potential measurements are often referred to as the ‘language’ of corrosion. They are the most fundamental process in the field of corrosion control. The purpose of potential measurements is to obtain a general idea of the ‘health’ of the cathodic protection system.

Individual Conference Papers

Association for Materials Protection and Performance