Menu
Search
Filters
Close
Menu

Highly Durable Solventborne Silicone Organic Hybrid For Protective Coating Applications

Picture for Highly Durable Solventborne Silicone Organic Hybrid For Protective Coating Applications
Available for download

The impact of corrosion on society is enormous. The National Association of Corrosion Engineers (NACE) estimated that the global total cost of corrosion is ~$2.5 trillion (USD), approximately 3.4% of global GDP.1 In 2016, NACE released the “International Measures of Prevention, Applications, and Economics of Corrosion Technology” which estimates that implementing corrosion prevention best General Business practices could result in global savings between 13-15 percent of the cost of damage, or a savings between $375-875 billion (USD) annually on a global basis.

Product Number: 51322-17537-SG
Author: Dr. Erin Vogel, Dr. Gary Wieber,Dr. Adam Tomasik, Dr. Yanxiang Li,
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings
$0.00
$20.00
$20.00

In high-performance protective coating applications, traditional systems often require three distinct layers of different composition/formulation for optimal protection of the structure against degradation. Polyurethane topcoats have been widely used as high performance and durable coatings in these applications; however, they typically contribute little to corrosion protection and therefore are not useful as primers. In these applications, a two-coat system providing similar performance as the three-coat system would yield labor and material savings as well as reduced environmental impact. Advances in understanding the compatibility between silicone and organic resins has led to the development of a new isocyanate-free hybrid resin technology that combines the advantages of silicones (e.g., outstanding weather resistance, hydrophobicity) with the benefits of an organic binder (e.g., corrosion protection, adhesion). Excellent corrosion resistance is observed after 3000 hours (as a two-coat system) or 1000 hours (as a single coat system) salt fog exposure with no evidence of blistering, cracking or rusting. Weathering tests show exceptional gloss retention over 4000 hr QUV A or Q-Sun exposure and after >2 years South Florida exposure. The hybrid technology also has low VOC and favorable hazard labelling when compared against those of standard PU coatings.

In high-performance protective coating applications, traditional systems often require three distinct layers of different composition/formulation for optimal protection of the structure against degradation. Polyurethane topcoats have been widely used as high performance and durable coatings in these applications; however, they typically contribute little to corrosion protection and therefore are not useful as primers. In these applications, a two-coat system providing similar performance as the three-coat system would yield labor and material savings as well as reduced environmental impact. Advances in understanding the compatibility between silicone and organic resins has led to the development of a new isocyanate-free hybrid resin technology that combines the advantages of silicones (e.g., outstanding weather resistance, hydrophobicity) with the benefits of an organic binder (e.g., corrosion protection, adhesion). Excellent corrosion resistance is observed after 3000 hours (as a two-coat system) or 1000 hours (as a single coat system) salt fog exposure with no evidence of blistering, cracking or rusting. Weathering tests show exceptional gloss retention over 4000 hr QUV A or Q-Sun exposure and after >2 years South Florida exposure. The hybrid technology also has low VOC and favorable hazard labelling when compared against those of standard PU coatings.

Product tags
Also Purchased
Picture for How To Acquire A Reliable Scale Inhibitor MEC Number Based On Laboratory Testing Results – A Field Case Analysis
Available for download

How To Acquire A Reliable Scale Inhibitor MEC Number Based On Laboratory Testing Results – A Field Case Analysis

Product Number: 51322-17623-SG
Author: Dong Shen, Jeffrey Russek, Haiping Lu, Larry Hines, Michael Jordon Oney
Publication Date: 2022
$20.00

The formation of mineral scales is one of the most problematic threats to the oil and gas operations which can lead to loss of production, increased lifting costs and assets deterioration.1 Mineral scales can precipitate at any locations within an oil and gas production system and create blockage in perforations, production tubulars, pumps, and surface equipment. The formation of scale deposits can be attributed to the mixing of incompatible waters from different production zones or physical and chemical condition changes associated with produced water transporting from reservoir to wellhead and further to processing facilities.
Picture for Handling Extreme Environments With Supoxy Platform Technology
Available for download

Handling Extreme Environments With Supoxy Platform Technology

Product Number: 51322-17643-SG
Author: Justin Manuel, Chad Remy
Publication Date: 2022
$20.00

One can find some of the most aggressive and corrosive environments for coatings in the process work and equipment functions for Oil and Gas Upstream facilities. These conditions have typically been handled using traditional coating options such as vinyl esters, epoxies, or baked phenolic linings. While these products are often tailored to environments with elevated temperatures and pressures found within upstream and “downhole” oil and gas production, the inception of new drilling techniques and the discovery of new shale basins has morphed the landscape of corrosive environments in this market.
Picture for Improved Girth Welding On Seamless Linepipe For High H2S Partial Pressure Condition
Available for download

Improved Girth Welding On Seamless Linepipe For High H2S Partial Pressure Condition

Product Number: 51322-17710-SG
Author: Florian Thebault, Antoine Remy, Laurent Faivre, Sébastien Leconte
Publication Date: 2022
$20.00

NACE MR0175 / ISO 15156 document part 2 provides material requirements for selecting cast irons and low-alloy steels for sour environments.1 Figure 1 is reproduced from this standard and describes different regions of environmental severity for Sulfide Stress Cracking (SSC): service in region 0 being the least susceptible to cracking, even for very sensitive materials, and region 3 being the worst.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support