Save 20% on select titles with code HIDDEN24 - Shop The Sale Now
Cleaning, restoration and conservation of murals and decorative paintings are three vastly different definitions. Murals get dirty over time. To wash them with a non-invasive cleanser is to “clean” them. You could clean a mural with de-ionized water or mild cleansers. Blowing the dust off with light compressed air, soft bristle brushing or chemical sponging is also considered cleaning. Once we step from a surface dirt removal to a yellowed varnish removal, or penetrated dirt removal, we have entered the conservator’s field.
Cleaning, restoration and conservation of murals and decorative paintings are three vastly different definitions. Murals get dirty over time. To wash them with a non-invasive cleanser is to “clean” them. You could clean a mural with de-ionized water or mild cleansers. Blowing the dust off with light compressed air, soft bristle brushing or chemical sponging is also considered cleaning. Once we step from a surface dirt removal to a yellowed varnish removal, or penetrated dirt removal, we have entered the conservator’s field. Conservators are controlled by a strict code of ethics of the American Institute for Conservation of Historic and Artistic Works. These ethics are simply out of respect for the original artist. It is important to use the least aggressive material to strip the varnish so that the original artist’s work is preserved.
Selecting the most appropriate protective coating for the exterior of steel wind towers involves balancing the variables of production and protection to maximize profitability. The coating solution that maximizes production and protection while realizing a profitability that is equal to or greater than owner expectations is an organic zinc-rich epoxy primer and polyaspartic urethane topcoat.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
Fusion bonded epoxy (FBE) is the primary coating used in North America for new pipeline construction and is strongly featured in the Middle East1. Pre-coated FBE pipe is routinely stockpiled and stored in large quantities at several locations close to pipeline right-of-ways. Once stockpiled, most of the pipesremain un-used until an inspection and remediation program is initiated2. Integrity projects purchase FBE coated pipe in advance and stockpile it until it is required. In addition, project delays and left-over pipe from completed projects can cause stockpiling for future use for undetermined periods of time. Under ultraviolet (UV) exposure in the presence of air, photooxidative degradation of FBE coatings occurs due to photometrical reactions arising from UV absorption.