Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

51314-4212-Evaluation of HTHA Effect on Carbon Steel and Carbon 0.5 Mo Exchanger

Picture for Evaluation of HTHA Effect on Carbon Steel and Carbon 0.5 Mo Exchanger
Available for download
Product Number: 51314-4212-SG
ISBN: 4212 2014 CP
Author: Musaed AL-Arada
Publication Date: 2014
$0.00
$0.00
$0.00
EVALUATION OF HTHA EFFECT ON CARBON STEEL & CARBON 0.5 Mo EXCHANGER USING VARIOUS NDE TECHNIQUES FOR REFORMER WASTE HEAT BOILER GAS EXCHANGER IN A HYDROGEN UNITExisting C-0.5Mo steel in hydrogen service is still a concern in the petroleum and petrochemical industry. High-temperature hydrogen attack (HTHA) has been one of the major problems in the petroleum and petrochemical industry because of its deleterious effects. Since the original Nelson curves were suggested in 1949 to define the operating limits for steels used in hydrogen service to avoid HTHA a number of research and investigation activities on HTHA have been carried out around the world.In the USA American Petroleum Institute (API) summarized these data as Publication 941 – “Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants” in 1970 and since then it has been widely used for material selection in hydrogen service operation and maintenance in petroleum and petrochemical plants.HTHA has been observed in petroleum refining and petrochemical equipment used in environments with high hydrogen pressures at elevated temperatures. This attack is caused by the ingress of hydrogen into steel. Hydrogen atoms react with dissolved carbons or carbides in steel and form methane gas in accordance with the following chemical reaction.4H + C ? CH4 or 4H + MC ? CH4 + 3M (M: metals)This gaseous methane forms voids mainly on grain boundaries or inclusions and the increase of gaseous methane pressure in the voids may result in the formation of micro-fissures blistering or cracking. The tensile strength and ductility of the attacked material is significantly deteriorated finally causings catastrophic failures.During hydrogen unit shut down E-18-205 (Waste Heat Boiler Exchanger) was opened for Maintenance & Inspection.This heat exchanger operates at high temperature in hydrogen service.The 10” Ø bypass flue gas pipe made of C-0.5Mo in this reformer waste heat exchanger in hydrogen unit was found leaking while hydrotest of the equipment during plant shutdown (Jan 2009). Subsequently various NDE techniques were used to determine the location and extent of the crack on the base metal of the center pipe 
EVALUATION OF HTHA EFFECT ON CARBON STEEL & CARBON 0.5 Mo EXCHANGER USING VARIOUS NDE TECHNIQUES FOR REFORMER WASTE HEAT BOILER GAS EXCHANGER IN A HYDROGEN UNITExisting C-0.5Mo steel in hydrogen service is still a concern in the petroleum and petrochemical industry. High-temperature hydrogen attack (HTHA) has been one of the major problems in the petroleum and petrochemical industry because of its deleterious effects. Since the original Nelson curves were suggested in 1949 to define the operating limits for steels used in hydrogen service to avoid HTHA a number of research and investigation activities on HTHA have been carried out around the world.In the USA American Petroleum Institute (API) summarized these data as Publication 941 – “Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants” in 1970 and since then it has been widely used for material selection in hydrogen service operation and maintenance in petroleum and petrochemical plants.HTHA has been observed in petroleum refining and petrochemical equipment used in environments with high hydrogen pressures at elevated temperatures. This attack is caused by the ingress of hydrogen into steel. Hydrogen atoms react with dissolved carbons or carbides in steel and form methane gas in accordance with the following chemical reaction.4H + C ? CH4 or 4H + MC ? CH4 + 3M (M: metals)This gaseous methane forms voids mainly on grain boundaries or inclusions and the increase of gaseous methane pressure in the voids may result in the formation of micro-fissures blistering or cracking. The tensile strength and ductility of the attacked material is significantly deteriorated finally causings catastrophic failures.During hydrogen unit shut down E-18-205 (Waste Heat Boiler Exchanger) was opened for Maintenance & Inspection.This heat exchanger operates at high temperature in hydrogen service.The 10” Ø bypass flue gas pipe made of C-0.5Mo in this reformer waste heat exchanger in hydrogen unit was found leaking while hydrotest of the equipment during plant shutdown (Jan 2009). Subsequently various NDE techniques were used to determine the location and extent of the crack on the base metal of the center pipe 
Product tags
Also Purchased
Picture for A New Method for Prioritizing Equipment in HTHA Service for Inspection and Replacement
Available for download

51316-7233-A New Method for Prioritizing Equipment in HTHA Service for Inspection and Replacement

Product Number: 51316-7233-SG
ISBN: 7233 2016 CP
Author: Jeremy Staats
Publication Date: 2016
$20.00

Background on High Temperature Hydrogen Attack (HTHA). Some current developments in HTHA inspection and mitigation. How several refiners have instituted an HTHA risk management plan for their refineries and the challenges and pitfalls they have encountered
Picture for High Temperature Hydrogen Attack (HTHA) Modeling Prediction and Non-Intrusive Inspection Review
Available for download

High Temperature Hydrogen Attack (HTHA) Modeling Prediction and Non-Intrusive Inspection Review

Product Number: 51317--8924-SG
ISBN: 8924 2017 CP
Author: M. Nugent / T. Silfies / J. D. Dobis / Tim Armitt
Publication Date: 2017
$20.00

There is an ongoing Joint Industry Program on the development of high temperature hydrogen attack (HTHA) remaining life assessment and evaluation of non-destructive examination technologies. HTHA model development and assessment examples will be discussed.
Picture for Looking Behind the Curtain of API 941 HTHA Data
Available for download

51316-7516-Looking Behind the Curtain of API 941 HTHA Data

Product Number: 51316-7516-SG
ISBN: 7516 2016 CP
Author: Trace Silfies
Publication Date: 2016
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support