Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Electrodeposited Nanolaminar Zinc-Nickel Alloy Coatings – Analysis of Advanced Corrosion Resistance Performance

Picture for Electrodeposited Nanolaminar Zinc-Nickel Alloy Coatings – Analysis of Advanced Corrosion Resistance Performance
Available for download

Nanolaminar or nanostructured zinc-nickel electrodeposited coatings are compliant with the composition requirements of ASTM B841 and F1941 (12 to 16% Ni: balance Zn). The term nanolaminar refers to the successive thin layered deposition of nanostructured grains (≈ 25nm); accomplished by modulating the electrodeposition into a waveform applied at defined time periods and varying current densities. Standard electroplating in contrast, applies a continuous DC current throughout the electrodeposition process, resulting in grains that while initially fine will coarsen as a function of thickness ranging to the micrometer range.

Product Number: 51323-19204-SG
Author: Herman E Amaya, Timm Burnett, Richard Morgan, Vikas Joshi
Publication Date: 2023
$0.00
$20.00
$20.00

Nanolaminar electrodeposited zinc nickel alloys have demonstrated a performance up to 10x greater than standard zinc-nickel coatings. This performance is due to the unique microstructure and grain size of the alloys in the range of 25 to 100nm, which impart increased strength, hardness, and corrosion resistance.


This paper will give a brief overview of the nanolaminar deposition process and will present data on extended ASTM B117 Salt Fog data, comparing various grades of nanolaminar zinc-nickel to a standard electroplated zinc-nickel coatings. In addition to this, the nanolaminate coatings will be characterized metallurgically to support and define the reasons for the greater corrosion resistance and overall performance of the coatings. This will be supported by data from field trials conducted in the areas of the Oil & Gas industry that have frequent failures due to corrosion. Further developments and improvements will also be detailed that open the application of the technology both to existing and new industrial applications.

Nanolaminar electrodeposited zinc nickel alloys have demonstrated a performance up to 10x greater than standard zinc-nickel coatings. This performance is due to the unique microstructure and grain size of the alloys in the range of 25 to 100nm, which impart increased strength, hardness, and corrosion resistance.


This paper will give a brief overview of the nanolaminar deposition process and will present data on extended ASTM B117 Salt Fog data, comparing various grades of nanolaminar zinc-nickel to a standard electroplated zinc-nickel coatings. In addition to this, the nanolaminate coatings will be characterized metallurgically to support and define the reasons for the greater corrosion resistance and overall performance of the coatings. This will be supported by data from field trials conducted in the areas of the Oil & Gas industry that have frequent failures due to corrosion. Further developments and improvements will also be detailed that open the application of the technology both to existing and new industrial applications.

Product tags
Also Purchased
Picture for Effect of Oxygen Excursion On SCC Resistance of Tubing Materials
Available for download

Effect of Oxygen Excursion On SCC Resistance of Tubing Materials

Product Number: 51323-18779-SG
Author: Luciana Intiso, Yvi Le Guen, Federica Sammartino, Roberto Morana, Lee Smith
Publication Date: 2023
$20.00

Oil and gas production from highly saline reservoirs can present challenges to the completion materials. The most saline fields often require downhole injection of (low chloride) wash water to dilute the produced water and mitigate the threat of halite precipitation on the production tubulars. The present paper investigates the threats associated with the co-mingled wash water and production fluids with respect to common completion materials.
Picture for Selective Degradation and Removal of Silyl-Containing Topcoats from Non-Metallic Substrates using Environmentally Friendly Fluoride Salts
Available for download

Selective Degradation and Removal of Silyl-Containing Topcoats from Non-Metallic Substrates using Environmentally Friendly Fluoride Salts

Product Number: 51323-18797-SG
Author: Erick B. Iezzi, Grant C. Daniels
Publication Date: 2023
$20.00

topcoats utilized on the exterior skin of Department of Defense (DoD) aircraft (i.e., fixed and rotary wing) and ground support equipment (GSE) are two-component (2K) polyurethanes (PUs) that are qualified to MIL-PRF-85285 performance requirements. These topcoats are formed from the chemical MARCH reaction of hydroxyl- and isocyanate-functional molecules to generate highly cross-linked polymeric networks that contain carbamate (i.e., urethane) linkages. Formation of these cross-linked networks result in durable coatings with excellent hydrocarbon resistance, mechanical and thermal properties, including resistance to ultraviolet (UV) degradation from sunlight.
Picture for Considerations Associated With the Selection of Electrochemical Protection Systems for a High-Rise Building in Sydney, Australia
Available for download

Considerations Associated With the Selection of Electrochemical Protection Systems for a High-Rise Building in Sydney, Australia

Product Number: 51323-18844-SG
Author: Blane McGuiness, Atef Cheaitani
Publication Date: 2023
$20.00

The case study presented in this paper is for a 7-story apartment building situated in a beach-front location in Sydney, Australia. The building was constructed circa 1977 and over the years was affected by concrete defects related to chloride ingress from the adjacent sea front.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support