Menu
Search
Filters
Close
Menu

TM-02-74-HD1974-SG, Dynamic Corrosion Testing of Metals in High Temperature Water-HD1974

Picture for Dynamic Corrosion Testing of Metals in High Temperature Water
Available for download

A pilot plant method for determining the extent and rate of uniform corrosion of metals in circulating water or aqueous solutions at temperatures greater than 100 C° (212° F) but less than approximately 360° C (680° F).  Historical Document 1974

Product Number: TM-02-74-HD1974
Author: NACE International
Publication Date: 1974
Industries: Process Industries , Test Method , Water/Wastewater
$179.00
$179.00
$179.00

Materials being considered for use in or to contain aqueous media in high pressure steam plants or water-cooled nuclear reactor plant systems require a measure of the rate of general corrosion under the anticipated environmental conditions. Pilot plant data are usually obtained by exposing test materials to simulated environmental conditions for various lengths of time. The general methods used for test may be similar, but techniques and procedures usually vary widely. The lack of standardized test methods for high temperature water corrosion testing results in data which are not always comparable or of limited utility because of differences in testing techniques, methods of analyses, or deficiencies in the reporting of results. This lack of uniformity in corrosion testing prompted NACE Unit Committee T- 7D on High Purity and Power Plant Water to make this standard method of test available to increase the utility and reliability of high temperature aqueous corrosion data. The Standard is also intended to aid users of such data by indicating how the data were obtained and the possible limitations for applicati0n to selection of materials or environmental conditions for high temperature water systems. The method described herein is intended primarily for the evaluation of metals used for structural components and for containment of aqueous solutions.

This Standard was prepared by NACE Unit Committee T-7D on High Purity and Power Plant Water and its Task Group T-7D-14. Before completion of this document, Unit Committee T-7D was designated as Unit Committee T-1 IA on High Purity and Power Plant Water under NACE Group Committee T-11 on Thermal Power Generating Corrosion.

Historical Document 1974

Materials being considered for use in or to contain aqueous media in high pressure steam plants or water-cooled nuclear reactor plant systems require a measure of the rate of general corrosion under the anticipated environmental conditions. Pilot plant data are usually obtained by exposing test materials to simulated environmental conditions for various lengths of time. The general methods used for test may be similar, but techniques and procedures usually vary widely. The lack of standardized test methods for high temperature water corrosion testing results in data which are not always comparable or of limited utility because of differences in testing techniques, methods of analyses, or deficiencies in the reporting of results. This lack of uniformity in corrosion testing prompted NACE Unit Committee T- 7D on High Purity and Power Plant Water to make this standard method of test available to increase the utility and reliability of high temperature aqueous corrosion data. The Standard is also intended to aid users of such data by indicating how the data were obtained and the possible limitations for applicati0n to selection of materials or environmental conditions for high temperature water systems. The method described herein is intended primarily for the evaluation of metals used for structural components and for containment of aqueous solutions.

This Standard was prepared by NACE Unit Committee T-7D on High Purity and Power Plant Water and its Task Group T-7D-14. Before completion of this document, Unit Committee T-7D was designated as Unit Committee T-1 IA on High Purity and Power Plant Water under NACE Group Committee T-11 on Thermal Power Generating Corrosion.

Historical Document 1974

Product tags
Also Purchased
Picture for Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations
Available for download

RP0475-1975, Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations

Product Number: 53028-HD1975
Author: NACE
Publication Date: 1975
$179.00

HISTORICAL DOCUMENT. Selecting corrosion resistant metallic materials for supply, storage, pumping and injection of water encountered in oil field operations. Historical Document 1975
MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996
Available for download

MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996

Product Number: 21301-HD1995
Author: NACE International
Publication Date: 1995
$179.00

Material requirements for three types of polyolefin-based, cold-applied tapes used in coating pipelines - including pressure-sensitive and butyl-laminate tapes. Historical Document 1995
NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators
Available for download

NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

Product Number: 21391-HD1995
Publication Date: 1995
$179.00

Factors that make electrical substation painting unique.  Worker safety and painting of radiators.  Providing owners, engineers, and maintenance personnel with sample specifications that they may modify to meet their specific requirements. Historical Document 1995
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support