Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Development of Materials and Process Metrics for High Performance Abrasive Blast Surface Preparation

Development of Materials and Process Metrics for High Performance Abrasive Blast Surface Preparation
Available for download

Protective coating systems provide the primary corrosion protection for assets in sea water. Protective coating systems are defined as a specific combination of surface preparation and coating material applied under specified conditions to a specific structure. Over the past many years, the paint industry has focused considerable resources toward the formulation, performance testing and fine tuning of coatings materials. 

Product Number: 41216-977-SG
Author: Robert Kogler, Laura Erickson
Publication Date: 2016
Industries: Coatings , Coatings and Linings
$0.00
$20.00
$20.00

Protective coating systems provide the primary corrosion protection for assets in sea water. Protective coating systems are defined as a specific combination of surface preparation and coating material applied under specified conditions to a specific structure. Over the past many years, the paint industry has focused considerable resources toward the formulation, performance testing and fine tuning of coatings materials. These efforts have produced outstanding results through implementation of advanced coating materials such as single coat, ultra-high solids paint for tanks, and by sharpening and implementing aggressive requirements in quality assurance and specification documents. Far less emphasis has been placed on understanding and refining the details of surface preparation and the effects of variations in these details on the subsequent performance of sea water immersion coatings. However, it is generally accepted that improper or inadequate surface preparation is a major contributor to real world coatings failures. This area is ripe for coating system quality and performance gains.

Protective coating systems provide the primary corrosion protection for assets in sea water. Protective coating systems are defined as a specific combination of surface preparation and coating material applied under specified conditions to a specific structure. Over the past many years, the paint industry has focused considerable resources toward the formulation, performance testing and fine tuning of coatings materials. These efforts have produced outstanding results through implementation of advanced coating materials such as single coat, ultra-high solids paint for tanks, and by sharpening and implementing aggressive requirements in quality assurance and specification documents. Far less emphasis has been placed on understanding and refining the details of surface preparation and the effects of variations in these details on the subsequent performance of sea water immersion coatings. However, it is generally accepted that improper or inadequate surface preparation is a major contributor to real world coatings failures. This area is ripe for coating system quality and performance gains.

Product tags
Also Purchased
Effect of Surface Preparation of Coating Performance
Available for download

Effect of Surface Preparation of Coating Performance

Product Number: 41216-953-SG
Author: Devin Clark, Richard C. Ferguson & James W. Rawlins
Publication Date: 2016
$20.00

Coating performance and longevity is highly dependent on the quality of substrate surface preparation. The effect of profile height, profile type (e.g., type of tool used to perform the prep, angularity of profile, etc.), extent of cleanliness, and amount of chloride contamination on coating performance were all studied to determine the correlation between these factors in an attempt to identify the primary factor in coating failure due to improper surface preparation.
Picture for Coatings + Proceedings 2021-ALL Papers
Available for download

(Surface Prep) National Shipbuilding Research Program Surface Preparation and Coatings Panel SSPC 2

Product Number: 48-COAT_DEC21
Author: Arcino “Q” Quiero, Jr.
Publication Date: 2021
$20.00

This summary is a look at implementable work and a gage of the value of future work. The strategic implementation of Surface Preparation and Coatings Automation, Standardization and Digitization of Visual Inspection, and Surface Preparation and Coatings Training Certification Program could provide cost and schedule savings. Optimizing Power Tool Surface Preparation potentially will increase Shipbuilders safety, while reducing material and labor costs.
Picture for Coatings + Proceedings 2021-ALL Papers

(Surface Prep) Power Tool Surface Preparation in Shipyards

Product Number: 64-COAT_DEC21
Author: Eric Shoyer
Publication Date: 2021
$20.00

Power tool cleaning has been a common method of surface preparation prior to coating application since the dawn of steel shipbuilding. Power tools are usually handheld pneumatic, or sometimes electric, devices that through impacting or abrasive action can remove coating and corrosion. Most commonly power tool cleaning has been used for re-work or coating repair associated with outfitting. Typically, power tools are limited to the touch up or repair of small areas or areas that cannot be accessed by bulkier equipment such as abrasive blasters.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support