Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Corrosion Under Insulation Performance Of Insulation Stand-Offs And Non-Metallic Membranes

Picture for Corrosion Under Insulation Performance Of Insulation Stand-Offs And Non-Metallic Membranes
Available for download

Corrosion under thermal insulations namely CUI (Corrosion under insulation) is among the key damage mechanisms which poses integrity risk to the hydrocarbon facilities. CUI is reportedly known as the reason behind 40-60% of failures in the facility piping whereas small bore piping (i.e., NPS < 4”) are even more sensitive to CUI failures, where up to 81% of reported failures in small-sized piping are known to be from CUI.  Monetary spending to inspect and fix CUI-related failures cost 10% of overall maintenance budget in a typical medium-sized oil refinery.  CUI risk is influenced by numerous operational and environmental factors which impedes its management in a typical AIM (Asset integrity management) program.

Product Number: 51322-17618-SG
Author: Ahmad Raza Khan Rana, Graham Brigham, Omar Chaar,George Jarjoura
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings and Linings , Coatings
$0.00
$20.00
$20.00

CUI (Corrosion Under Insulation) is among the key damage mechanisms affecting equipment and piping in hydrocarbon processing facilities, as well as pipelines. The key reason behind CUI is the contact of soaked insulations with the metal(s). Insulation stand-offs and membranes can keep the soaked insulation off the pipe and mitigate CUI risk. This research study addresses the CUI simulation tests to characterize the corrosion behaviors of carbon steel under isothermal wet and cyclic wet conditions, in the presence of insulation stand-offs, low point drains, and Teflon membranes. The corroded coupons were characterized using microscope and surface topography to investigate the damage modes namely pitting, uniform corrosion, localized damage. Insulation stand-offs with low point drains showed uniform corrosion in comparison to closed-contacting insulation, which mainly caused localized corrosion and pitting. Teflon membrane with low point drains caused the least corrosion rate among candidate configurations and did not show any noticeable surface damage from pitting or even uniform corrosion.

CUI (Corrosion Under Insulation) is among the key damage mechanisms affecting equipment and piping in hydrocarbon processing facilities, as well as pipelines. The key reason behind CUI is the contact of soaked insulations with the metal(s). Insulation stand-offs and membranes can keep the soaked insulation off the pipe and mitigate CUI risk. This research study addresses the CUI simulation tests to characterize the corrosion behaviors of carbon steel under isothermal wet and cyclic wet conditions, in the presence of insulation stand-offs, low point drains, and Teflon membranes. The corroded coupons were characterized using microscope and surface topography to investigate the damage modes namely pitting, uniform corrosion, localized damage. Insulation stand-offs with low point drains showed uniform corrosion in comparison to closed-contacting insulation, which mainly caused localized corrosion and pitting. Teflon membrane with low point drains caused the least corrosion rate among candidate configurations and did not show any noticeable surface damage from pitting or even uniform corrosion.

Product tags
Also Purchased
Corrosion Under Insulation (CUI) Management – A Case History
Available for download

Corrosion Under Insulation (CUI) Management – A Case History

Product Number: 51219-196-SG
Author: David A. Hunter
Publication Date: 2019
$20.00

Pond investigated pressure vessel tank failures which are causing recurring maintenance of $250,000 per year. This challenging project had limitations of space, operational time pressures/vessel availability requirements, cost and replacement variables. This presentation will chronical problems and discuss best practices of specifications, material selection, surface preparation, and application inspection that would have prevented the aforementioned outcome. This paper discusses the fundamentals of composite coatings, industry accepted design standards for their use, and examples of typical uses for these materials that solve problems in varied industries.
Picture for Corrosion Under Insulation And Atmospheric Corrosion In The Refinery Industry. An Accurate Approach To Estimate Corrosion Growth Rates, A Texas Refinery Case Study
Available for download

Corrosion Under Insulation And Atmospheric Corrosion In The Refinery Industry. An Accurate Approach To Estimate Corrosion Growth Rates, A Texas Refinery Case Study

Product Number: 51322-17751-SG
Author: Bernardo Cuervo, Mark McQueen
Publication Date: 2022
$20.00

External corrosion in uninsulated pipelines is normally able to be prevented by cathodic protection (CP). Generally, external corrosion on buried pipelines cannot occur if CP current is getting onto the pipe. CP is an electrochemical means of corrosion control in which the oxidation reaction in a galvanic cell is concentrated at the anode and suppresses corrosion of the cathode (pipe) in the same cell. For instance, to make a pipeline a cathode, an anode is attached to it.
Picture for Corrosion Under Insulation Detection Technique
Available for download

51313-02570-Corrosion Under Insulation Detection Technique

Product Number: 51313-02570-SG
ISBN: 02570 2013 CP
Author: Sally Nicola
Publication Date: 2013
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support