Menu
Search
Filters
Close
Menu

51316-7667-Corrosion Study of Welds and Heat-Affected Zones of Wrought Nickel-Based Alloys

Picture for Corrosion Study of Welds and Heat-Affected Zones of Wrought Nickel-Based Alloys
Available for download
Product Number: 51316-7667-SG
ISBN: 7667 2016 CP
Author: Ajit Mishra
Publication Date: 2016
$0.00
$20.00
$20.00
Nickel-based alloys containing chromium (Cr) molybdenum (Mo) and tungsten (W) are widely used in various industries where the material experiences corrosive environments. While the corrosion behavior of wrought commercial Nickel-based alloys are widely studied there is little to no information on the corrosion performance of their welds and heat-affected-zones (HAZ) even though these are typically the weak regions for corrosion initiation and propagation. In the present study the corrosion performance of base metal all-weld-metal (AWM) and HAZ samples of B-3 (UNS N10675) G-30 (UNS N06035) and C-276 (UNS N10276) alloys were evaluated in various acidic solutions. The alloys were selected based on the alloying composition i.e. N10675 contains high Mo N06035 contains high Cr and N10276 has a balance of Cr and Mo. Various corrosion and surface analytical techniques were utilized to analyze the results.
Nickel-based alloys containing chromium (Cr) molybdenum (Mo) and tungsten (W) are widely used in various industries where the material experiences corrosive environments. While the corrosion behavior of wrought commercial Nickel-based alloys are widely studied there is little to no information on the corrosion performance of their welds and heat-affected-zones (HAZ) even though these are typically the weak regions for corrosion initiation and propagation. In the present study the corrosion performance of base metal all-weld-metal (AWM) and HAZ samples of B-3 (UNS N10675) G-30 (UNS N06035) and C-276 (UNS N10276) alloys were evaluated in various acidic solutions. The alloys were selected based on the alloying composition i.e. N10675 contains high Mo N06035 contains high Cr and N10276 has a balance of Cr and Mo. Various corrosion and surface analytical techniques were utilized to analyze the results.
Product tags
Also Purchased
Picture for Materials Selection for Use in Hydrochloric Acid
Available for download

51316-7680-Materials Selection for Use in Hydrochloric Acid

Product Number: 51316-7680-SG
ISBN: 7680 2016 CP
Author: Ajit Mishra
Publication Date: 2016
$20.00
Picture for Uniform and Localized Corrosion Study of Base Material and Welds of Ni-Cr-Mo (W) Alloys
Available for download

Uniform and Localized Corrosion Study of Base Material and Welds of Ni-Cr-Mo (W) Alloys

Product Number: 51317--9406-SG
ISBN: 9406 2017 CP
Author: Ajit Mishra
Publication Date: 2017
$20.00

In the present study, corrosion behavior of base metal (BM), all-weld-metal (AWM) and heat-affected-zone (HAZ) samples of C-276 (UNS N10276), C-22 (UNS N06022) and C-2000 (UNS N06200) alloys were evaluated in concentrated hydrochloric (HCl), sulfuric (H2SO4) and nitric acid (HNO3).

 
Picture for Effects of CO2 and H2S on Corrosion of Martensitic Steels in NaCl(aq) at Low Temperature
Available for download

51316-7659-Effects of CO2 and H2S on Corrosion of Martensitic Steels in NaCl(aq) at Low Temperature

Product Number: 51316-7659-SG
ISBN: 7659 2016 CP
Author: Serguei Lvov
Publication Date: 2016
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support